SH110-4 DANLEY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Rev. 202305022 SH110-4

2 Way Full Range Loudspeaker

© 2022 Danley Sound Labs. All Rights Reserved.Danley Sound Labs Inc.

2196 Hilton Drive, Suite E

Gainesville, GA 30501 danleysoundlabs.com | 877.419.5805 Performance Specifications Operating Mode Two-way single channel amplified Operating Range 360Hz - 15 KHz, -3dB

90 Hz - 20 KHz, -10dB

Low 2x8”, High 1x1.4” Power Handling 500 W Cont. | 2000 W Peak Sensitivity measured as 2.83V @1m distance 104 dB Maximum SPL (continuous |peak) 128 dB | 134 dB M Noise Comming Soon Impedance

4 Ohm

Recommended Power Amplifier

1000 Watt

Connections (SH110-4-I/SH110-4-T) (2) Neutrik NL4 Speakon wired in Parallel Pin 1+/- | Full Range Pin 2+/- | Pass Through Connections (SH110-4-I-EW) 1x 2 Conductor Lead-in Wire Mounting / Suspension Points (2) M10 yoke points (SH110-4-I/SH110-4-I-EW) M10 rigging points Dimensions / Weight 24 x 10 x 15.5 in. | 611 x 254 x 194 mm.

42 Ibs | 19 Kg

Black polyurea coated enclosure w/ matte black grille, or White polyurea coated enclosure w/ matte white grille Gray UV resistant painted enclosure w/ matte grey grille Enclosure Material 18mm Baltic Birch, polyurea coated Options SH110-4-I-EW Extreme Weatherized Version SH110-4-I Install Version SH110-4-T Touring Version Accessories BRKT-95 U-Bracket for SH110-4/16 / SH95 The SH110-4 is a 2-way, passive loudspeaker designed as a front fill. The SH110-4 includes (2) x 8” LF drivers, and (1) x 1.4” exit HF compression driver, all mounted within a single 110° x 60° horn. Utilizing our patented Synergy Horn™ technology, we uniquely place drivers within the horn in unison with a Synergy crossover network to allow for proper phase alignment between frequency bands. This permits the physically separated bands to combine and emerge from the horn as a single source, greatly reducing off axis distortions in frequency response and allowing for greater clarity at long distances. Furthermore, out of band harmonic distortion is reduced by the use of acoustic low pass filters on the low and mid frequency drivers. The 13-ply Baltic Birch used throughout the enclosure is encased in PolyUrea for protection from impact and atmospheric conditions. Install and touring versions are both equipped with multiple M10 rig points. Our EW (Extreme Weather) variant offers the ultimate in protection from the elements due to the use of high-density polyurethane panels impregnated with fiberglass fibers in the place of standard plywood. As an added layer of protection we include our Sentinel™ high frequency driver protection circuitry which is a multistage limiter that protects the high freq driver in the event of overloads (peaks or long term). It is inaudible during normal operation, so dynamic range is not compromised. Utilize our DNA amplifiers or processor for maximum performance and protection with industry leading DSP capabilities.

Rev. 202305022 SH110-4 © 2022 Danley Sound Labs. All Rights Reserved.Danley Sound Labs Inc. Gainesville, GA 30501 danleysoundlabs.com | 877.419.5805 The loudspeaker shall utilize the Synergy Horn pattented enclosure covering two pass bands. The coverage pattern shall be 110° horizontal x 60° vertical. The loudspeaker shall have an operating rage of 90 Hz - 20kHz - 10 dB. Sensitivity of 104 dBSPL @ 1m. Output of 128 dBSPL/134 dBSPL Peak. Power handling shall be 500 Watts continuous, 2000 Watts peak. The impedance shall be nominal 4 ohms. The loudspeaker shall be constructed of 13 ply Baltic birch, water resistant Polyurea coated, properly braced for the intended use and a rugged steel grill. The connectors shall be Neutrik NL4. The Loudspeaker shall be the Danley Sound Labs SH110-4. ARCHITECT/ENGINEERS SPECS KLIPPEL 100 105 110 115 120 100 1000 10000 SPL Horizontal r = 2 m, Reference: 1 m, 2.83 V, smoothed 2/oct. Sound Pressure Level / dB (re 20 µPa) Frequency / Hz On-Axis 10° 20° 30° 40° 50° 60° KLIPPEL 100 105 110 115 120 100 1000 10000 SPL Vertical r = 2 m, Reference: 1 m, 2.83 V, smoothed 2/oct. Sound Pressure Level / dB (re 20 µPa) Frequency / Hz On-Axis 10° 20° 30° 40° 50° 60° Sensitivity Impedance Horizontal Response Horizontal Directivity Contour Vertical Response Vertical Directivity Contour KLIPPEL 100 105 110 115 120 50 100 200 500 1k 2k 5k 10k 20k Frequency Response r = 2 m, phi = 0°, theta = 0°, Reference: 1 m, 2.83 V, smoothed 6/oct., Delay removed: 3.06 ms Sound Pressure Level / dB (re 20 µPa) Frequency / Hz - Magnitude KLIPPEL 50 100 200 500 1k 2k 5k 10k 20k Magnitude of transfer function H(f) H(f)= Voltage Speaker 1 / Current Speaker 1 H(f) / (Ohm) Frequency / Hz Magnitude *Relative Sensitivity - Processed and Amplified with amplifier gain removed to campare with 2.83V Sensetivity.