SFV-RAY ELMA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 15
Technical content
CompactPCI ® Serial Carrier for Vector VN-Series FlexRay & CAN-FD Adapters
SFV-RAY • CompactPCI® Serial • Vector VN-Series FlexRay Carrier Card General The SFV-RAY is a CompactPCI® Serial carrier card for the Vector VN7610 and similar Vector FlexRay/CAN-FD compact interfaces. As a supplier of the automotive industry, Vector is well known for their platform of software tools. By means of the SFV-RAY, Vector solutions can be easily integrated into CompactPCI® Serial systems. A Vector VN-series interface module can be attached on-board to D-Sub and USB receptacles. Two front panel D-Sub connectors emulate a Vector splitter cable, in order to separate FlexRay and/or CAN ports. The SFV-RAY is equipped with an on-board USB controller and can be installed into any peripheral slot of a CompactPCI® Serial backplane. © E K F - 2 - e k f . c o m
SFV-RAY • CompactPCI® Serial • Vector VN-Series FlexRay Carrier Card Feature Summary General < PICMG® CompactPCI® Serial standard (CPCI-S.0) peripheral slot card < Single Size Eurocard 3U 4HP 100x160mm2 < Backplane connector P1 (PCIe® x1 and/or USB) Eligible Vector Interface Modules < VN7610 FlexRay & CAN FD (SFV-7610-RAY) < VN1610 dual CAN (SFV-1610-RAY) < VN1611 LIN & CAN (SFV-1611-RAY) < Future compact interface modules < Module dimensions up to 42x20x65mm < For details of Vector hard- and software please refer to https://www.vector.com Front Panel Connectors < 4 HP front panel design < D-Sub 9-pin male connector 1 (FlexRay A/B, or CAN1, or LIN) < D-Sub 9-pin male connector 2 (CAN2) < USB 3.0 Type-A connector (option w. on-board USB controller) On-Board Resources < On-board USB 3.0 connector for Vector module attachment (backplane coupled USB3/USB2, requires USB2 enabled backplane slot) < On-board D-Sub receptacle for Vector module attachment < Option on-board PCI Express® USB 3.0 dual port controller (requires PCIe® enabled backplane slot) < Option on-Board USB 3.0 connector for Vector module attachment, on-board USB controller coupled < Option USB 3.0 Type-A front connector, on-board USB controller coupled
Applications
< Test equipment for automotive applications < FlexRay, CAN, LIN development, simulation, calibration, analysis < Based on 100% original/unmodified Vector hardware and software < Industrial automation IIoT < Enables rapid integration of Vector tools in CompactPCI® Serial systems © E K F - 3 - e k f . c o m
SFV-RAY • CompactPCI® Serial • Vector VN-Series FlexRay Carrier Card Feature Summary Environment & Regulation < Designed & Manufactured in Germany < ISO 9001 certified quality management < Long term availability < Rugged solution (coating, sealing, underfilling on request) < RoHS compliant < Operating temperature: -40°C to +85°C (industrial temperature range for SFV-RAY carrier card) < Storage temperature: -40°C to +85°C, max. gradient 5°C/min (SFV-RAY carrier card) < Vector VN7610 interface module operating temperature -40°C to +50°C (please refer to vector.com) < Humidity 5% ... 95% RH non condensing < Altitude -300m ... +3000m < Shock 15g 0.33ms, 6g 6ms < Vibration 1g 5-2000Hz < MTBF 67.7 years (SFV-RAY carrier card) < EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1) © E K F - 4 - e k f . c o m
SFV-RAY • CompactPCI® Serial • Vector VN-Series FlexRay Carrier Card Block Diagram On-Board USB Front Panel I/O Simplified Block Diagram SFV-RAY Vector FlexRay Carrier Card USB 3.0 TUSB 7320 Option Option Option Peripheral Slot FlexRay PCIe® USB3 USB3 USB3 USB 2.0 Backplane USB Cable Assembly Attached to VN1610 Backplane CompactPCI Serial VN7610 NV 1610 VN1611 CAN CAN 2/7, 4/8 0R Jumpers Mfg Config Emulation of Vector Splitter Cbl USB 3.0 LIN © E K F - 5 - e k f . c o m
SFV-RAY • CompactPCI® Serial • Vector VN-Series FlexRay Carrier Card SFV-RAY • CompactPCI® Serial • Vector Module Carrier • © EKF • ekf.com P6P6 © EKF ekf.com USB Controller USB Backplane USB 3.0 D-Sub 1 FlexRay male D-Sub 2 CAN FD male D-Sub Vector female USB Cable VN7610VN7610 USB 3.0 USB 3.0 Component Orientation © E K F - 6 - e k f . c o m
SFV-RAY • CompactPCI® Serial • Vector VN-Series FlexRay Carrier Card SFV-7610 SFV-1610 SFV-1611 Front Panel © E K F - 7 - e k f . c o m
SFV-RAY • CompactPCI® Serial • Vector VN-Series FlexRay Carrier Card © EKF • ekf.com Please note: The front handle is provided with a built-in microswitch, which is used to disable the on-board power circuit when released. Vice versa, the on-board devices are enabled not before the handle gets locked. Please refer to the illustration below and make sure that the eject lever has reached its final position for proper board operation, as shown in picture 8. A gentle click should be audible, when the red actuator pin moves into its raised position, indicating that the board is locked and ready for use. 1 - 4: remove board 5 - 8: install board 1 & 8: on-board power enabled 2-7: on-board power disabled © E K F - 8 - e k f . c o m
SFV-RAY • CompactPCI® Serial • Vector VN-Series FlexRay Carrier Card Front Panel Connectors Front Panel D-Sub 1 - FlexRay Vector VN7610 FlexRay A/B 2 (2) BM FR A BP FR A 7 (7) 3 (3) FR GND BP FR B 8 (8) 4 (4) BM FR B Front Panel D-Sub 2 - CAN Vector VN7610 CAN 2 (1) CAN Low CAN High 7 (9) 3 (6) CAN GND front connector pin assignment according to Vector FR/CANcable 2Y pin numbers gray/italic reflect the on-board D-Sub connector (VN7610) pin assignment © E K F - 9 - e k f . c o m
SFV-RAY • CompactPCI® Serial • Vector VN-Series FlexRay Carrier Card Front Panel D-Sub 1 - CAN Vector VN1610 CAN Channel 1 2 (2) CAN Low CAN High 7 (7) 3 (3) CAN GND 5 (5) Shield Front Panel D-Sub 2 - CAN Vector VN1610 CAN Channel 2 2 (1) CAN Low CAN High 7 (8) 3 (6) CAN GND 5 (5) Shield front connector pin assignment according to Vector CANcable 2Y pin numbers gray/italic reflect the on-board D-Sub connector (VN1610) pin assignment © E K F - 1 0 - e k f . c o m
SFV-RAY • CompactPCI® Serial • Vector VN-Series FlexRay Carrier Card Front Panel D-Sub 1 - LIN Vector VN1611 LIN 2 (2) - LIN 7 (7) 3 (3) VB- 4 (4) PDIS VB+ 9 (9) 5 (5) Shield Front Panel D-Sub 2 - CAN Vector VN1611 CAN 2 (1) CAN Low CAN High (8) 7 3 (6) CAN GND 5 (5) Shield front connector pin assignment according to Vector CANcable 2Y pin numbers gray/italic reflect the on-board D-Sub connector (VN1611) pin assignment © E K F - 1 1 - e k f . c o m
SFV-RAY • CompactPCI® Serial • Vector VN-Series FlexRay Carrier Card SFV-1610 © E K F - 1 2 - e k f . c o m
SFV-RAY • CompactPCI® Serial • Vector VN-Series FlexRay Carrier Card SFV-1611 © E K F - 1 3 - e k f . c o m
SFV-RAY • CompactPCI® Serial • Vector VN-Series FlexRay Carrier Card
Related Products
Industrial Ethernet & Fieldbus Module Carrier Cards SF1-STUDIO • Dual PCI Express® Mini Card Carrier for Real Time Ethernet Modules www.ekf.com/s/sf1/sf1.html SF2-CANDY • Quad PCI Express® Mini Card Carrier for CAN Modules www.ekf.com/s/sf2/sf2.html
Ordering Information
For popular SFV-RAY SKUs please refer to www.ekf.com/liste/liste_21.html#SFV SFV-7610-RAY Assembly w. Vector 7610 module 2 x FlexRay, 1 x CAN SFV-1610-RAY Assembly w. Vector 1610 module 2 x CAN SFV-1611-RAY Assembly w. Vector 1611 module 1 x LIN, 1 x CAN Vector interface adapters referenced are not necessarily scope of any SVF-RAY SKU For details of Vector hard- and software please refer to https://www.vector.com Please contact sales@ekf.de for ready to use assembly of SFV-RAY carrier card and Vector adapter module SFV-RAY carrier cards are suitable for either PCIe® or USB enabled CompactPCI® Serial backplane slots. Since the on-board USB 3.0 controller is based on PCIe®, the front panel USB connector is functional only if the SFV-RAY was inserted into a PCIe® enabled backplane slot. Please plug the Vector module USB cable connector to the appropriate on-board USB receptacle. © E K F - 1 4 - e k f . c o m
SFV-RAY • CompactPCI® Serial • Vector VN-Series FlexRay Carrier Card Beyond All Limits: EKF High Performance Embedded Industrial Computers Made in Germany boards. systems. solutions. Document No. 9502 • 2 September 2020 EKF Elektronik GmbH Philipp-Reis-Str. 4 (Haus 1) Lilienthalstr. 2 (Haus 2)
59065 HAMM
Phone +49 (0)2381/6890-0 Fax +49 (0)2381/6890-90 Internet www.ekf.com E-Mail sales@ekf.com