SFS884 SSDI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Solid State Devices, Inc.
14830 Valley View Blvd * La Mirada, Ca 90638
Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer’s Data Sheet FEATURES:
- High Surge Current
- High On State Current
- High Frequency up to 400 Hz operation
- Anode Common to Case
- Hermetically Sealed
- Replacement for part number 2N884 thru 2N889 and 2N876 thru 2N881 devices.
- TX, TXV, S-Level Screening Available. Consult Factory SFS884 thru SFS889
20 AMPS
15 ─ 200 VOLTS SILICON CONTROLLED RECTIFIER TO-18 MAXIMUM RATINGS (TJ = 25 o C UNLESS OTHERWISE NOTED, RGK = 1K Ω) Symbol Value Units Peak Repetitive Reverse Voltage and DC Blocking Voltage SFS884 SFS885 SFS886 SFS887 SFS888 SFS889 V DRM VRRM 100 150 200 Volts Average On-State Current Ta = 30oC Ta = 100ºC IF (AV) 0.5
0.35 Amps
Peak Recurrent Surge Current (Ta ≤ 100oC, tp = 0.2 ms, duty cycle = 0.1 % ) IFSR 20 Amps Peak Gate Current I GM 250 mA Peak Gate Voltage V GM 5 Volts Operating Junction Temperature Range T J -65 to +150 oC Storage Temperature Range Tstg -65 to +150 oC PACKAGE OUTLINE: TO-18 Ø.195 .178 .210 .170 .500 MIN Ø.230 .209 3x Ø.021 .016 Ø.105 .095 .048 .028 .046 .036 45° .030 MAX
ELECTRICAL CHARACTERISTICS
( Ta = 25ºC unless otherwise indicated) Symbol Min Typical Max Unit Peak Reverse Blocking Current (Rated VRRM) Tj = 25ºC Tj = 125ºC IRRM –– –– 10 100 µA Peak Forward Blocking Current (Rated VDRM) Tj = 25ºC Tj = 125ºC IDRM –– –– 10 100 µA Peak On-State Voltage (IF = 0.2 A Peak ) VTM –– 1.0 1.50 Volts Reverse Gate Current (VG = -2 VDC, Anode = open) IGR –– –– 10 µA Gate Trigger Current (VD = 12 VDC, RL = 33 Ω) IGT –– 50 80 µA Gate Trigger Voltage (VD = 12 VDC, RL = 33 Ω) VGT 0.4 0.65 0.72 Volts Holding Current (IT = 500 mA, Gate Open) IH –– 1.0 2.2 mA Critical Rate of Voltage Rise (Linear slope up to VD= 67% of VDRM, Rgk= 1KΩ) dV/dt –– 750 –– V/µs Commutated Turn-off Time (If = 2A, Ig = 200 mA, dIg/dt = 0.1A/us) tqt –– 2 –– µs NOTES: 1/ Unless Otherwise Specified, All Electrical Characteristics @ TC = 25oC, RGK = 1K Ω. Available Part Numbers: SFS884, SFS885, SFS886, SFS887, SFS888, SFS889 PIN ASSIGNMENT (Standard) Package Cathod e Gate Anode TO-18 Pin 1 Pin 2 Pin 3 (case) Solid State Devices, Inc. Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SFS884 thru SFS889 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SCR008A DOC