DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SCR010A DOC Solid State Devices, Inc.

14701 Firestone Blvd * La Mirada, CA 90638

Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 1/ └ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV S = S Level Voltage/Family 7 = 30V 8 = 60V 9 = 100V SFS3027S.22 through SFS3029S.22

0.5 AMP, 30 - 100 Volt

FEATURES:  Passivated planar construction  Low on-state voltage and fast switching  Hermetically Sealed surface mount power package  Pulse current up to 30A MAXIMUM RATINGS Symbol Value Units Peak Repetitive Reverse Voltage and DC Blocking Voltage SFS3027 SFS3028 SFS3029 VDRM VRRM 100 Volts Non-Repetitive Peak Reverse Blocking Voltage (t < 5.0 ms) SFS3027 SFS3028 SFS3029 VRSM 100 200 Volts RMS On-State Current, (All Conduction Angles, Tc= 100oC) IT (RMS) 0.5 Amps Peak Non-Repetitive Surge Current (One Cycle, 60 Hz ) ITSM 8 Amps Peak Gate Power P GM 0.1 Watts Average Gate Current I G(ave) 0.025 Amps Peak Gate Current I GM 0.25 Amps Reverse Gate Current I GR 0.003 Amps Reverse Gate Voltage V GM 5.0 Volts Operating Junction Temperature Range T J -65 to +150 oC Storage Temperature Range Tstg -65 to +200 oC Thermal Resistance, Junction to Case R θJC 15 oC/W NOTES: 1/ For ordering information, price, operating curves, and availability- Contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Unless otherwise specified, all electrical characteristics @25ºC. SMD.22

NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SCR010A DOC ELECTRICAL CHARACTERISTICS Symbol Min Typical Max Unit Peak Reverse Blocking Current (Rated VRRM, TC = 25oC) (Rated VRRM, TC = 150oC) IRRM –– 0.08 0.15 0.1 50 μA Peak Forward Blocking Current (Rated VRRM, TC = 25oC) (Rated VRRM, TC = 150oC) IDRM –– 0.08 0.15 0.1 20 μA Peak On-State Voltage (IF = 1.0 A Peak) VTM 0.8 1.1 1.5 Volts Gate Trigger Current (VD = 5 VDC, RL = 10,000 Ω , TC = 25oC) (VD = 5 VDC, RL = 10,000 Ω, TC = -65oC) IGT –– 200 1200 μA Gate Trigger Voltage (VD = 5 VDC, RL = 100 Ω , TC = 25oC) (VD = 5 VDC, RL = 100 Ω, TC = -65oC) (VD = 5 VDC, RL = 100 Ω , TC = 150oC) VGT 0.4 0.6 0.1 0.55 0.75 0.20 0.8 1.1 0.6 Volts Holding Current (VD = 5 VDC, RL = 1000 Ω , TC = 25oC) (VD = 5 VDC, RL = 1000 Ω, TC = -65oC) (VD = 5 VDC, RL = 1000 Ω , TC = 150oC) IH 0.3 0.5 0.05 1.0 1.5 0.38 5.0 10.0 1.0 mA NOTES: * RGK current is not included in measurement Case Outline: SMD.22 PIN 1: ANODE PIN 2: CATHODE PIN 3: GATE *For information on curves, contact the Factory Representative for Engineering Assistance. Solid State Devices, Inc. Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SFS3027S.22 through SFS3029S.22