SFS2323 SSDI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SCR004C DOC Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 1/ └ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV S = S Level └ Voltage/Family 23 = 50V 24 =100V 26 = 200V 27 = 250V 28 = 300V 29 = 400V SFS2323 thru SFS2329
1.6 AMP
50 ─ 400 VOLTS FEATURES:
- Low-Level Gate Characteristics
- I GT = 200 μA (Max) @ 25oC
- Low Holding Current I H = 1 mA (Max) @ 25oC
- Anode Common to Case
- Hermetically Sealed MAXIMUM RATINGS Symbol Value Units Peak Repetitive Reverse Voltage and DC Blocking Voltage SFS2323 SFS2324 SFS2326 SFS2327 SFS2328 SFS2329 VDRM VRRM 100 200 250 300 400 Volts Non-Repetitive Peak Reverse Blocking Voltage (t < 5.0 ms) SFS2323 SFS2324 SFS2326 SFS2327 SFS2328 SFS2329 VRSM 150 300 350 400 500 Volts RMS On-State Current (All Conduction Angles) IT (RMS) 1.6 Amps Peak Non-Repetitive Surge Current (One Cycle, 60 Hz, TC = 80oC ) ITSM 15 Amps Peak Gate Power P GM 0.1 Watts Average Gate Power P G (AV) 0.01 Watts Peak Gate Current I GM 0.1 Amps Peak Gate Voltage V GM 6.0 Volts Operating Junction Temperature Range T J -65 to +125 oC Storage Temperature Range Tstg -65 to +150 oC Thermal Resistance, Junction to Case R θJC 30 oC/W NOTES: 1/ For ordering information, price, operating curves, and availability- Contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Unless otherwise specified, all electrical characteristics @25ºC. TO-5
NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SCR004C DOC ELECTRICAL CHARACTERISTICS Symbol Min Typical Max Unit Peak Reverse Blocking Current (Rated VRRM, TC = 25oC) (Rated VRRM, TC = 125oC) IRRM –– 0.12 0.1 100 μA Peak Forward Blocking Current (Rated VRRM, TC = 25oC) (Rated VRRM, TC = 125oC) IDRM –– 0.14 1.0 100 μA Peak On-State Voltage (IF = 1.6 A Peak) VTM –– 1.1 1.3 Volts Gate Trigger Current (VD = 6 VDC, RL = 100 Ω , TC = 25oC) (VD = 6 VDC, RL = 100 Ω, TC = -65oC) IGT –– 3.5 9.2 200 350 μA Gate Trigger Voltage (VD = 6 VDC, RL = 100 Ω , TC = 25oC) (VD = 6 VDC, RL = 100 Ω, TC = -65oC) (VD = 6 VDC, RL = 100 Ω , TC = 125oC) VGT 0.1 0.51 0.74 0.25 0.7 0.9 0.9 Volts Holding Current (VD = 6 VDC, RL = 100 Ω , TC = 25oC) (VD = 6 VDC, RL = 100 Ω, TC = -65oC) (VD = 6 VDC, RL = 100 Ω , TC = 125oC) IH 0.8 1.5 0.15 1.0 1.8 0.46 2.0 3.0 mA NOTES: * RGK current is not included in measurement Case Outline: TO-5 Ø.335 .305 .260 .240 1.500 MIN 45° Ø.210 .190 .034 .028 .045 .029 PIN 3 PIN 2 PIN 1 Ø.021 .016 Ø.370 .335 .125 .009 *For information on curves, contact the Factory Representative for Engineering Assistance. Solid State Devices, Inc. Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SFS2323 thru SFS2329 PIN 1: CATHODE PIN 2: GATE PIN 3: ANODE