SFM11-MH FORMOSA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
Plastic package has Underwrit ers Laboratory Flammability Classificat ion 94V-O Utilizing Flame Retardant Epoxy Molding Compound. For surface mounted applications. Exceeds environmental standar ds of MIL-S-19500 / 228 Low leakage current . Mechanical dat a Case : Molded plastic, JEDEC SOD-123H Terminals : Solder plated, solderable per MIL-STD-750, Method 2026 Polarity : Indicated by cathode band Mounting Position : Any Weight : 0.0393 gram (V) (V) (V) (V) (nS) (oC) SFM11-MH S1 50 35 50 SFM12-MH S2 100 70 100 SFM13-MH S3 150 105 150 SFM14-MH S4 200 140 200 SFM15-MH S5 300 210 300 SFM16-MH S6 400 280 400 -55 to +150 Operating temperatureVRRM *1 VRMS *2 VR *3 VF *4 TRR SYMBOLS MARKING CODE 0.95 1.25 MAXIMUM RATINGS (AT TA=25oC unless otherwise noted) PARAMETER CONDITIONS Symbol MIN. TYP. MAX. UNIT Forward rectified current Ambient temperature = 50oC IO 1.0 A Forward surge current 8.3ms single half sine-wave superimposed on rate load (JEDEC methode) IFSM 25 A VR = VRRM TA = 25oC 5.0 uA VR = VRRM TA = 100oC 100 uA Thermal resistance Junction to ambient RqJA 42 oC / w Diode junction capacitance f=1MHz and applied 4vDC reverse voltage CJ 10 pF Storage temperature TSTG -55 +150 oC Reverse current IR *1 Repetitive peak reverse voltage *2 RMS voltage *3 Continuous reverse voltage *4 Maximum forward voltage *5 Reverse recovery time Formosa MS 0.146(3.7) 0.071(1.8) 0.055(1.4) 0.035(0.9) 0.028(0.7) 0.031(0.8) Typ. Dimensions in inches and (millimeters) SOD-123H 0.031(0.8) Typ.
.01 1.0 RATING AND CHARACTERISTIC CURVES (SFM11-MH THRU SFM16-MH) FIG.1-TYPICAL FORWARD CHARACTERISTICS FIG.5-TYPICAL JUNCTION CAPACITANCE INSTANTANEOUS FORWARD CURRENT,(A) FORWARD VOLTAGE,(V) Pulse Width 300us 1% Duty Cycle (+) (+) 25Vdc (approx.) ( ) ( ) PULSE GENERATOR (NOTE 2) OSCILLISCOPE (NOTE 1) NON- INDUCTIVE W NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. +0.5A -0.25A -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm trr D.U.T. FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS NONINDUCTIVE NONINDUCTIVE W W Tj=25 C FIG.2-TYPICAL FORWARD CURRENT AVERAGE FORWARD CURRENT,(A) 0.2 0.4 0.6 0.8 1.0 1.2 Single Phase Half Wave 60Hz Resistive Or Inductive Load DERATING CURVE AMBIENT TEMPERATURE ( C) 1.6 1.8 SFM15 H~SFM16 H SFM11-M H~SFM14-M H REVERSE VOLTAGE,(V) JUNCTION CAPACITANCE,(pF) .01 .05 .1 .5 1 5 10 50 100 0 25 50 75 100 125 150 175 FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60Hz 1 10 5 50 100 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method PEAK FORWARD SURGE CURRENT,(A)