SFAF801G TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/cuspopen Low forward voltage drop /cuspopen High current capability /cuspopen High reliability /cuspopen High surge current capability Mechanical Data /cuspopen Cases: ITO-220AC molded plastic /cuspopen Epoxy: UL 94V-O rate flame retardant /cuspopen Terminals: Leads solderable per MIL-STD-202, Method 208 guaranteed /cuspopen Polarity: As marked /cuspopen High temperature so ldering guaranteed: 2 6 0 oC/10 seconds 0.25”,(6.35mm) from c a s e . /cuspopen Weight: 2.24 grams /cuspopen Mounting torque: 5 in – 1bs. max. ITO-220AC Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol SFAF 801G SFAF 802G SFAF 803G SFAF 804G SFAF 805G SFAF 806G SFAF 807G SFAF 808G Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 300 400 500 600 V Maximum RMS Voltage VRMS 35 70 105 140 210 280 350 420 V Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 500 600 V Maximum Average Forward Rectified Current @TC = 100℃ I(AV) 8.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 125 A Maximum Instantaneous Forward Voltage @ 8.0A VF 0.975 1.3 1.7 V Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=100℃ IR 10 400 uA uA Maximum Reverse Recovery Time (Note 1) Trr 35 nS Typical Junction Capacitance (Note 2) Cj 90 60 pF Typical Thermal Resistance (Note 3) RθJC 4.0 ℃/W Operating Temperature Range TJ -65 to +150 ℃ Storage Temperature Range TSTG -65 to +150 ℃ Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 3. Mounted on Heatsink Size of 2 in x 3 in x 0.25 in Al-Plate.
- 265 - RATINGS AND CHARACTERISTIC CURVES (SFAF801G THRU SFAF808G) FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50/c87 NONINDUCTIVE /c49/c87 NON INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) DUT (+) 50Vdc (approx) (-) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms (-) (+) 10/c87 NONINDUCTIVE -1.0A -0.25A +0.5A trr 1cm SET TIME BASE FOR 5/ 10ns/ cm FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 0 50 100 1500 CASE TEMPERATURE. ( C) o FIG.3- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT .( A ) 0 20 40 60 80 100 120 140 1000 0.1 100 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) TJ=75 C0 TJ=100 C0 FIG.4- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 2 5 10 20 100 50 150 120 NUMBER OF CYCLES AT 60Hz TJ=125 C0 8.3ms Single Half Sine Wave JEDEC Method FIG.5- TYPICAL JUNCTION CAPACITANCE CAPACITANCE.(pF) 15 2 10 20 50 100 200 500 100 REVERSE VOLTAGE. (V) Tj=25 C0SFAF801G~SF AF804GSFAF805G~SF AF808G 1000 TJ=25 C0 FIG.6- TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FOR WARD CURRENT . (A) 0.01 0.1 0.03 0.3 100 FORWARD VOLTAGE. (V) Tj=25 C Pulse Width=300 s 1% Duty Cycle o SFAF801G ~SF AF804G SFAF805G~SFF A806G SFAF807G~SF AF808G