SFAF504G TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/G97/G3Low forward voltage drop /G97/G3High current capability /G97/G3High reliability /G97/G3High surge current capability Mechanical Data /G97/G3Case: ITO-220AC molded plastic /G97/G3Epoxy: UL 94V-O rate flame retardant /G97/G3Terminals: Leads solderable per MIL-STD- 202, Method 208 guaranteed /G97/G3Polarity: As marked /G97/G3High temperature soldering guaranteed: 2 5 0oC/10 seconds .16”,(4.06mm) from c a s e . /G97/G3Weight: 2.24 grams ITO-220AC Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25/G43aambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number SFAF504G Units Maximum Recurrent Peak Reverse Voltage 200 V Maximum RMS Voltage 140 V Maximum DC Blocking Voltage 200 V Maximum Average Forward Rectified Current .375 (9.5mm) Lead Length @TC = 100/G43a 5.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) 125 A Maximum Instantaneous Forward Voltage @ 5.0A 0.975 V Maximum DC Reverse Current @ TA=25/G43a at Rated DC Blocking Voltage @ TA=100/G43a 10.0 400 uA uA Maximum Reverse Recovery Time (Note 1) 35 nS Typical Junction Capacitance (Note 2) 70 pF Typical Thermal Resistance R/G4f0/G2dd/G2d6/G2b3(Note 3) 5.0 /G43a/G43a/G43a/G43a/W Operating Temperature Range TJ -65 to +150 /G43a/G43a/G43a/G43a Storage Temperature Range TSTG -65 to +150 /G43a/G43a/G43a/G43a Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR =1.0A, IRR =0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 3. Thermal Resistance from Junction to Case Mounted on Heatsink. .071(1.8) MAX .161(4.1) MAX .124(3.16) MAX .185(4.7) MAX .272(6.9) .248(6.3) .063(1.6) MAX .055(1.4) MAX .035(0.9) MAX .100(2.55) .543(13.8) .512(13.2) .100(2.55) .110(2.8) .098(2.5) .030(0.76) MAX .606(15.5) .583(14.8) .112(2.85) .100(2.55) .406(10.3)MAX .134(3.4)DIA .113(3.0)DIA
RATINGS AND CHARACTERISTIC CURVES ( SFAF504G ) FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50/c87 NONINDUCTIVE /c49/c87 NON INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) DUT (+) 50Vdc (approx) (-) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms (-) (+) 10/c87 NONINDUCTIVE -1.0A -0.25A +0.5A trr 1cm SET TIME BASE FOR 5/ 10ns/ cm FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 0 50 100 1500 CASE TEMPERATURE. ( C) o FIG.4- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 2 5 10 20 100 50 120 NUMBER OF CYCLES AT 60Hz TC=125 C0 8.3ms Single Half Sine Wave JEDEC Method FIG.5- TYPICAL JUNCTION CAPACITANCE CAPACITANCE.(pF) 15 2 10 20 50 100 200 500 100 REVERSE VOLTAGE. (V) Tj=25 C0 FIG.6- TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FOR WARD CURRENT . (A) .01 0.1 .03 1.0 0.3 3.0 100 FORWARD VOLTAGE. (V) Tj=25 C Pulse Width=300 s 1% Duty Cycle o FIG.3- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT .( A ) 0 20 40 60 80 100 120 140 1000 0.1 1.0 100 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) TC=25 C0 TC=100 C0