SFAF2001G TSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Dimensions in inches and (millimeters) Version: A06 SFAF2001G - SFAF2008G Isolated 20.0 AMPS. Glass Passivated Super Fast Rectifiers ITO-220AC .071(1.8) MAX .161(4.1) .146(3.7) .118(3.00) .124(3.16) .185(4.7) .173(4.4) .272(6.9) .248(6.3) .063(1.6) MAX .100(2.55) .543(13.8) .512(13.2) .100(2.55) .110(2.8) .098(2.5) .606(15.5) .583(14.8) .112(2.85) .100(2.55) .406(10.3) .390(9.90) .134(3.4)DIA .113(3.0)DIA .043(1.1) .020(0.5) .035(0.9) .055(1.4) .030(0.76) .020(0.50) PIN 1 PIN 2 Case Positive CASE F e a t u r e s /cuspopen High efficiency, low VF /cuspopen High current capability /cuspopen High reliability /cuspopen High surge current capability /cuspopen Low power loss. /cuspopen For use in low voltage, high frequency inventor, free wheeling, and polarity protection application M e c h a n i c a l D a t a /cuspopen Cases: ITO-220AC molded plastic /cuspopen Epoxy: UL 94V-0 rate flame retardant /cuspopen Terminals: Pure tin plated, lead free. solderable per MIL-STD-202, Method 208 guaranteed /cuspopen Polarity: As marked /cuspopen High temperature soldering guaranteed: 2 6 0 o C/10 seconds .16”,(4.06mm) from case. /cuspopen Weight: 2.24 grams Maximum Ratings and Electrical Characteristics Rating at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol SFAF 2001G SFAF 2002G SFAF 2003G SFAF 2004G SFAF 2005G SFAF 2006G SFAF 2007G SFAF 2008G Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 300 400 500 600 V Maximum RMS Voltage VRMS 35 70 105 140 210 280 350 420 V Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 500 600 V Maximum Average Forward Rectified Current @T C = 100 o C I(AV) 20 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 200 A Maximum Instantaneous Forward Voltage @ 20.0A VF 0.975 1.3 1.7 V Maximum DC Reverse Current A=25 o C at Rated DC Blocking Voltage @ TA=100 o C IR 400 uA uA Maximum Reverse Recovery Time (Note 1) Trr 35 nS Typical Junction Capacitance (Note 2) Cj 170 150 pF Typical Thermal Resistance (Note 3) RθJC 3.0 o C/W Operating Temperature Range T J -65 to +150 oC Storage Temperature Range T STG -65 to +150 o C Notes: 1. Reverse Recovery Test Conditions: I F=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 3. Mounted on Heatsink Size of 3” x 5” x 0.25” Al-Plate.

FIG.6- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50/c87 NONINDUCTIVE /c49/c87 NON INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) DUT (+) 50Vdc (approx) (-) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms (-) (+) 10/c87 NONINDUCTIVE -1.0A -0.25A +0.5A trr 1cm SET TIME BASE FOR 5/ 10ns/ cm RATINGS AND CHARACTERISTIC CURVES (SFAF2001G THRU SFA )F2008G FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 0 50 100 150 CASE TEMPERATURE. ( C) o FIG.4- TYPICAL JUNCTION CAPACITANCE CAPACITANCE.(pF) 15 2 10 20 50 100 200 500 100 150 200 250 300 REVERSE VOLTAGE. (V) Tj=25 C0 SFAF2005G ~SFAF2008G SFAF2001G~SF AF2004G 1000 FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 2 5 10 20 50 200 250 150 100 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine Wave JEDEC Method Tj=25 C0 100 FIG.5- TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FOR WARD CURRENT . (A) 0.01 0.1 0.03 0.3 100 FORWARD VOLTAGE. (V) Tj=25 C Pulse Width=300 s 1% Duty Cycle o SFAF2001G~SFAF2004G SFAF2005G~SF AF2006G SFAF2007G~SF AF2008G FIG.2- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT .( A ) 0 20 40 60 80 100 120 140 1000 0.1 100 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) TJ=25 C0 TJ=100 C0 TJ=75 C0 Version: A06