SFAF1601G_1 TSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Dimensions in inches and (millimeters) Version: A06 SFAF1601G - SFAF1608G Isolated 16.0 AMPS. Glass Passivated Super Fast Rectifiers ITO-220AC .071(1.8) MAX .161(4.1) .146(3.7) .118(3.00) .124(3.16) .185(4.7) .173(4.4) .272(6.9) .248(6.3) .063(1.6) MAX .100(2.55) .543(13.8) .512(13.2) .100(2.55) .110(2.8) .098(2.5) .606(15.5) .583(14.8) .112(2.85) .100(2.55) .406(10.3) .390(9.90) .134(3.4)DIA .113(3.0)DIA .043(1.1) .020(0.5) .035(0.9) .055(1.4) .030(0.76) .020(0.50) PIN 1 PIN 2 Case Positive CASE F e a t u r e s /cuspopen High efficiency, low VF. /cuspopen High current capability /cuspopen High reliability /cuspopen High surge current capability /cuspopen Low power loss. /cuspopen For use in low voltage, high frequency inventor, free wheeling, and polarity protection application M e c h a n i c a l D a t a /cuspopen Cases: ITO-220AC molded plastic /cuspopen Epoxy: UL 94V-0 rate flame retardant /cuspopen Terminals: Pure tin plated, lead free. solderable per MIL-STD-202, Method 208 guaranteed /cuspopen Polarity: As marked /cuspopen High temperature soldering guaranteed: 2 6 0 o C/10 seconds .16”,(4.06mm) from case /cuspopen Weight: 2.24 grams Maximum Ratings and Electrical Characteristics Rating at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol SFAF 1601G SFAF 1602G SFAF 1603G SFAF 1604G SFAF 1605G SFAF 1606G SFAF 1607G SFAF 1608G Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 300 400 500 600 V Maximum RMS Voltage VRMS 35 70 105 140 210 280 350 420 V Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 500 600 V Maximum Average Forward Rectified Current @TC = 100 o C I(AV) 16.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 200 A Maximum Instantaneous Forward Voltage @ 16.0A VF 0.975 1.3 1.7 V Maximum DC Reverse Current @TA=25 o C at Rated DC Blocking Voltage @ TA=100 o C IR 10 400 uA uA Maximum Reverse Recovery Time (Note 1) Trr 35 nS Typical Junction Capacitance (Note 2) Cj 130 100 pF Typical Thermal Resistance C (Note 3) RθJC 1.3 o C/W Operating Temperature Range T J -65 to +150 o C Storage Temperature Range T STG -65 to +150 o C Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 3. Mounted on Heatsink Size of 3” x 5” x 0.25” Al-Plate.

FIG.6- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM NONINDUCTIVE NON INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) DUT (+) 50Vdc (approx) (-) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms (-) (+) NONINDUCTIVE -1.0A -0.25A +0.5A trr 1cm SET TIME BASE FOR 5/ 10ns/ cm RATINGS AND CHARACTERISTIC CURVES (SFAF1601G THRU SFAF1608G) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 0 50 100 150 CASE TEMPERATURE. ( C) o FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 2 5 10 20 50 200 250 150 100 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine Wave JEDEC Method Tj=25 C0 100 FIG.4- TYPICAL JUNCTION CAPACITANCE CAPACITANCE.(pF) 15 2 10 20 50 100 200 500 100 150 200 250 300 REVERSE VOLTAGE. (V) Tj=25 C0 SFAF1601G ~SFAF1604GSFAF1605G ~SFAF1608G 1000 FIG.2- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT .( A ) 0 20 40 60 80 100 120 140 1000 0.1 100 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) TJ=25 C0 TJ=100 C0 TJ=75 C0 FIG.5- TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FOR WARD CURRENT . (A) 0.01 0.1 0.03 0.3 100 FORWARD VOLTAGE. (V) Tj=25 C Pulse Width=300 s 1% Duty Cycle o SFAF1601G~SF AF1604G SFAF1605G~SF AF1606G SFAF1607G~SF AF1608G Version: A06