SF801F YEASHIN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

8.0 Amperes

FEATURES

  • Low forward voltage drop
  • High current capability
  • High reliability
  • High surge current capability
  • Good for switching mode application High temperature soldering : • 260OC / 10 seconds at terminals Pb free product at available : 99% Sn above meet RoHS • environment substance directive request MECHANICAL DATA
  • Case: Molded plastic
  • Epoxy: UL 94V-0 rate flame retardant
  • Lead: Lead solderable per MIL-STD-202, method 208 guranteed
  • Polarity: As Marked
  • Mounting position: Any
  • Weight: 2.24 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 ambient temperature uniess otherwies specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER SF801F SF802F SF803F SF804F SF805F SF806F SF807F UNITS Maximum Recurre nt Peak Reverse Voltage 50 100 150 200 300 400 600 V Maximum RMS Voltage 35 70 105 140 210 320 420 V Maximum DC Blo cking Voltage 50 100 150 200 300 400 600 V Maximum Average Forward Rect ified Current .375"(9.5mm) Lead Length at Tc=100 8.0 A Peak For ward Surge Current , 8.3 ms single half s ine-wave super imposed on rated load (JEDEC method) 125 A Maximum I nstantaneous Forward Voltage at 8.0A 0.95 1.30 1.70 V Maximum DC Reverse Current Tc=25 °C at Rated DC Blocking Voltage Tc=100 500 µA µA Maximum Reverse Recovery Time (Note 1) 35 50 nS Typical Junction Capaci tance (Note 2) 50 pF Operating and Storage Temperature Range TJ, TSTG -55 +150 NOTES: 1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C. ITO-220AC Unit:inch(mm) .161(4.1) MAX .130(3.3) MAX .185(4.8) MAX .272(6.9) .248(6.3) .055(1.4) MAX .035(0.9) MAX .100(2.55) .543(13.8) .512(13.0) .100(2.55) .114(2.9) .098(2.5) .032(0.8) MAX .606(15.4) .583(14.8) .112(2.85) .100(2.55) .406(10.3)MAX .134(3.4)DIA .113(3.0)DIA DATA SHEET SF801F~SF807FSEMICONDUCTOR http://www.yeashin.com 1 REV.02 20110725

RATINGS AND CHARACTERISTIC CURVES 0.1 0.1 1.0 1.0 .01 100 1000 FIG.3-TYPICAL FORWARD FIG.4-TYPICAL REVERSE FIG.1- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC CHARACTERISTICS CHARACTERISTICS FIG.2-TYPICAL FORWARD CURRENT AVERAGE FORWARD CURRENT,(A) FIG.5-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.6-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE (V) JUNCTION CAPACITANCE,(pF) INSTANTANEOUS FORWARD CURRENT,(A) REVERSE LEAKAGE CURRENT, ( A) µ FORWARD VOLTAGE,(V) Pulse Width 300us 1% Duty Cycle 175 150 125 100 (+) (+) 25Vdc (approx.) ( ) ( ) NONINDUCTIVE NONINDUCTIVE Ω Ω PULSE GENERATOR (NOTE 2) OSCILLISCOPE (NOTE 1) NON- INDUCTIVE Ω NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. +0.5A -0.25A -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm trr .01 .05 .1 .5 1 5 10 50 100 D.U.T. 3.0 Single Phase Half Wave 60Hz Resistive Or Inductive Load DERATING CURVE 600V 100V-200V Tc=100 C Tc=25 C Tj=25 C 100 125 NUMBER OF CYCLES AT 60Hz 1 10 5 50 100 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method 0 25 50 75 100 125 150 175 CASE TEMPERATURE,( C) PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) 20 40 60 80 100 120 140 PEAK FORWARD SURGE CURRENT,(A) 300V-400V SF801F~SF807F http://www.yeashin.com 2 REV.02 20110725