SF61G MIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

SUPER FAST GLASS PASSIVATED RECTIFIER E-mail: sales@cnmic.com Web Site: www.cnmic.com VOLTAGE RANGE 50 to 400 Volts SF61G THRU SF66G CURRENT 6.0 Ampere

FEATURES

  • Super fast switching speed
  • Glass passivated chip junction
  • Low power loss, high efficiency
  • Low leakage
  • High Surge Capacity
  • High temperature soldering guaranteed 260℃/10 seconds, 0.375″(9.5mm) lead length MECHANICAL DATA
  • Case: Transfer molded plastic
  • Epoxy: UL94V-0 rate flame retardant
  • Polarity: Color band denotes cathode end
  • Lead: Plated axial lead, solderable per MIL-STD-202E method 208C
  • Mounting position: Any
  • Weight: 0.07ounce, 2.0 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
  • Ratings at 25℃ ambient temperature unless otherwise specified
  • Single Phase, half wave, 60Hz, resistive or inductive load
  • For capacitive load derate current by 20% SYMBOLS SF 61G SF 62G SF 63G SF 64G SF 65G SF 66G UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 150 200 300 400 Volts Maximum RMS Voltage VRMS 35 70 105 140 210 280 Volts Maximum DC Blocking Voltage VDC 50 100 100 200 300 400 Volts Maximum Average Forward Rectified Current 0.375”(9.5mm) lead length at TA=55℃ I(AV) 6.0 Amps Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) IFSM 150 Amps Maximum Instantaneous Forward Voltage at 6.0A VF 0.95 1.25 Volts TA = 25℃ 5.0 Maximum DC Reverse Current at rated DC blocking Voltage at TA = 125℃ IR 50 µA Maximum Reverse Recovery Time Test conditions lF= 0.5A, lR= 1.0A, lRR=0.25A trr 35 nS Typical Junction Capacitance (Measured at 1.0MHz and applied reverse voltage of 4.0V) CJ 50 30 pF Typical Thermal Resistance (NOTE 1) RθJA 30 ℃/W Operating Junction Temperature Range TJ (-55 to +150) ℃ Storage Temperature Range TSTG (-55 to +150) ℃ Notes: 1. Thermal Resistance from Junction to Ambient with 0.375″(9.5mm) lead length, PCB mounted. DIA..052(1.3) .048(1.2) 1.0(25.4) MIN. .360(9.1) .340(8.6) 1.0(25.4) MIN. DIA. Dimensions in inches and (millimeters) R-6 .360(9.1) .340(8.6)

SUPER FAST GLASS PASSIVATED RECTIFIER E-mail: sales@cnmic.com Web Site: www.cnmic.com VOLTAGE RANGE 50 to 400 Volts SF61G THRU SF66G CURRENT 6.0 Ampere 6.0 RATING AND CHRACTERISTIC CURVES SF61G THRU SF66G FIG.2-MAXIMUM NON-REPETITIVE PEAK 100 Tjmax 4020102 150 100 CURRENT, (A) PEAK FORWARD SURGE NUMBER OF CYCLES AT 60 Hz 8.3ms Single Half Sine-Wave (JEDEC Method) T= FORWARD SURGE CURRENTDERATING CURVE FIG.1-TYPICAL FORWARD CURRENT 150 17512575 10050 Single Phase Inductive Load Half Wave 60Hz Resistive or AVERAGE FORWARD CURRENT, (A) AMBIENT TEMPERATURE, ( ° C) 0.375″(9.5mm) Lead Length 468

1 Cycle

JT =25° C 8040 100 (μA) 1.2 JT =25° C 0.80.4 1% Duty Cycle Pulse Width=300us (A)(A) 100 INSTANTANEOUS FORWARD VOLTAGE,(V) FIG.5-TYPICAL JUNCTION CAPACITANCE 0.1 1.0 REVERSE VOLTAGE,(V) Vsig=50mVp-p JUNCTION CAPACITANCE,(pF) INSTANTANEOUS FORWARD CURRENT, INSTANTANEOUS REVERSE CURRENT, 1.6 f=1MHz T =25° C 1.010100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) J 1.0 0.1 1.0 0.1 0.01 0.61.01.41.8 60200 120140 T =125° CJ 50/100ns/cm SET TIME BASE FOR -1.0A -0.25A +0.5A (+) (-) (-) (approx.) (+)

25 Vdc

10Ω NONINDUCTIVENONINDUCTIVE 50Ω (NOTE 1) OSCILLOSCOPE (NOTE 2) GENERATIOR PULSED.U.T. INDUCTIVE NON 2.Rise time=10ns max. Source Impedance= 50 ohms 1 magohm. 22pF NOTES : 1.Rise Time=7ns mas. Input Impedance= REVERSE RECOVERY TIME CHARACTERISTIC F1G.6-TEST CIRCUIT DIAGRAM AND 1cm Trr 0.01 100 FORWARD CHARACTERISTICS FIG.3-TYPICAL INSTANTANEOUS FIG.4-TYPICAL REVERSE CHARACTERISTICS 5.0 3.0 1.0 4.0 2.0 SF61G-SF64G SF65G-SF66G SF61G-64G SF65G-66G