SF610 VANLONG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

610.00 MHz SAW Filter

Phone: +86 10 6301 4184 Fax: +86 10 6301 9167 Email: sales@vanlong.com Web: http://www.va nlong.com © April 2004 by Vanlong Technology Co., Ltd. SF610

  • Ideal Front-End Filter for Wireless Receivers
  • Low-Loss, Coupled-Resonator Quartz Design
  • Simple External Impedance Matching
  • Rugged, Hermetic, Low Profile F-11 Package Absolute Maximum Rating (Ta=25°C) Parameter Rating Unit RF Power Dissipation 0 dBm DC Voltage VDC Between Any Two Pins 10 V Operating Temperature Range -10 ~ +65 °C Storage Temperature Range -40 ~ +85 °C Electronic Characteristics Parameter Sym Minimum Typical Maximum Unit Frequency (25°C) Nominal Frequency fC NS 610.00 NS MHz Image Carrier Frequency fIMG NS 607.15 NS MHz Insertion Loss Attenuation 607.25 MHz … 613.75 MHz IL - 4.0 6.5 dB 3dB Passband BW3 - 10.0 - MHz Passband Ripple 607.25 MHz … 613.75 MHz - - ±0.5 ±1.0 dB Relative Attenuation (relative to IL) fC - 40.0 MHz … fC - 18.0 MHz

600.75 MHz

fC + 12.0 MHz … fC + 40.0 MHz dB dB dB Frequency Aging Absolute Value during the First Year |fA| - - 10 ppm/yr DC Insulation Resistance Between any Two Pins - 1.0 - - MΩ Input / Output Impedance Nominal - - 50 // 0 Ω//pF NS = Not Specified Notes: 1. The frequency fC is defined as the midpoint between the 3dB frequencies. 2. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 Ω test system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 3. Unless noted otherwise, specifications apply over the entire specified operating temperature range. 4. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 5. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 6. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 7. For questions on technology, prices and delivery please contact our sales offices or e-mail to sales@vanlong.com. SF610

Phone: +86 10 6301 4184 Fax: +86 10 6301 9167 Email: sales@vanlong.com Web: http://www.va nlong.com © April 2004 by Vanlong Technology Co., Ltd. SF610 Package Dimensions (F-11) M a r k i n g T e s t C i r c u i t Typical Frequency Response Electrical Connections Terminals Connection

1 Input/Output

2 Case Ground

3 Case Ground

4 Output/Input

Dimensions Nom. (mm) Tol. (mm) A 11.0 ±0.3 B 4.5 ±0.3 C 3.2 ±0.3 D 0.45 ±0.1 E 5.0 ±0.5 F 2.54 ±0.2 Nominal Source/Load Impedance : 50 Ω SF610 Ink Marking Color: Black or Blue