SF501F PACELEADER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
VOLTAGE - 50 TO 600 VOLTS CURRENT - 5.0 AMPERES SUPERFAST RECOVERY RECTIFI ERSUPERFAST RECOVERY RECTIFI ER SF501 F thru SF507 F FEATURES MECHANICAL DATA MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS NOTES 1. Reverse Recovery Time test condition IF=0.5A , IR=1.0A , IRR=0.25A 2. Measured at 1.0MHz and applied reverse Voltage of 4.0V D.C ITO-220AC www.paceleader.tw ‧Superfast recovery times-epitaxial construction. ‧Low forward voltage, high current capability. ‧Exceeds environmental standards of MIL-S-19500/228. ‧Hermetically sealed. ‧Low leakage. ‧High surge capability. ‧Plastic package has Underwriters Laboratories Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. High temperature soldering : 260‧ O C / 10 seconds at terminals Pb free product at available : 99% Sn above meet RoHS ‧ environment substance directive request ‧Case: Molded plastic ‧Epoxy: UL 94V-0 rate flame retardant ‧Lead: Lead solderable per MIL-STD-202, method 208 guranteed ‧Polarity: As Marked ‧Mounting position: Any ‧Weight: 2.24 grams Ratings at 25°C ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. UNITS Maximum Recurrent Peak Reverse Voltage 50 100 150 200 300 400 600 V Maximum RMS Voltage 35 70 105 140 210 320 420 V Maximum DC Blocking Voltage 50 100 150 200 300 400 600 V Maximum Average Forward Current .375"(9.5mm) lead length at TA=55 ￠J 5.0 A Peak Forward Surge Current, IFM (surge):8.3ms single halfsine-wave superimposed on rated load(JEDEC method) 150.0 A Maximum Forward Voltage at 5.0A DC 0.95 1.25 1.70 V Maximum DC Reverse Current at Rated DC Blocking Voltage 5.0 µA Maximum DC Reverse Current at Rated DC Blocking Voltage TA=125℃ 300 µA Maximum Reverse Recovery Time(Note 1) 35.0 nS Typical Junction capacitance (Note 2) 45 pF Typical Junction Resistance(Note 3) RθJA 25 ℃/W Operating and Storage Temperature Range TJ -60 to +150 ℃ SF501F SF502F SF503F SF504F SF505F SF506F SF507F
0.1 1.0 FIG.4-TYPICAL REVERSE FIG.1- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC CHARACTERISTICS FIG.2-TYPICAL FORWARD CURRENT AVERAGE FORWARD CURRENT,(A) FIG.6-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE,(V) JUNCTION CAPACITANCE,(pF) REVERSE LEAKAGE CURRENT, (mA) 175 150 125 100 (+) (+) 25Vdc (approx.) ( ) ( ) NONINDUCTIVE NONINDUCTIVE W W PULSE GENERATOR (NOTE 2) OSCILLISCOPE (NOTE 1) NON- INDUCTIVE W NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. +0.5A -0.25A -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm trr .01 .05 .1 .5 1 5 10 50 100 D.U.T. 3.0 Single Phase Half Wave 60Hz Resistive Or Inductive Load 0.375"(9.5mm) Lead Length DERATING CURVE Tj=100 C Tj=25 C 120 150 NUMBER OF CYCLES AT 60Hz 1 10 5 50 100 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE,( C) PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) 20 40 60 80 100 120 140 PEAK FORWARD SURGE CURRENT,(A) FIG.5-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 0.1 1.0 .01 FIG.3-TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT,(A) FORWARD VOLTAGE,(V) Pulse Width 300us 1% Duty Cycle 3.0 SF55~SF56 SF57 SF51~SF54 Tj=25 C SUPERFAST RECOVERY RECTIFI ERSUPERFAST RECOVERY RECTIFI ER SF501 F thru SF507 F RATINGS AND CHARACTERISTIC CURVES SF501F THRU SF507F 2www.paceleader.tw