SF31G TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/cuspopen Low forward voltage drop /cuspopen High current capability /cuspopen High reliability /cuspopen High surge current capability Mechanical Data /cuspopen Case: Molded plastic /cuspopen Epoxy: UL 94V-O rate flame retardant /cuspopen Lead: Axial leads, solderable per MIL-STD- 202, Method 208 guaranteed /cuspopen Polarity: Color band denotes cathode end /cuspopen High temperature soldering guaranteed: 2 6 0 oC/10 seconds/.375”,(9.5mm) lead lengths at 5 lbs., (2.3kg) tension /cuspopen Mounting position: Any /cuspopen Weight: 1.1 grams DO-201AD Dimensions in inches and (millimeters) Maximum Ratings and El ectrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol SF 31G SF 32G SF 33G SF 34G SF 35G SF 36G SF 37G SF 38G Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 300 400 500 600 V Maximum RMS Voltage VRMS 35 70 105 140 210 280 350 420 V Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 500 600 V Maximum Average Forward Rectified Current .375 (9.5mm) Lead Length @TA = 55℃ I(AV) 3.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 125 A Maximum Instantaneous Forward Voltage @ 3.0A VF 0.95 1.3 1.7 V Maximum DC Reverse Current @ T A=25℃ at Rated DC Blocking Voltage @ T A=125℃ IR 5.0 100 uA uA Maximum Reverse Recovery Time (Note 1) Trr 35 nS Typical Junction Capacitance (Note 2) Cj 80 60 pF Typical Thermal Resistance (Note 3) RθJA RθJL 10 ℃/W Operating Temperature Range TJ -65 to +150 ℃ Storage Temperature Range TSTG -65 to +150 ℃ Notes: 1. Reverse Recovery Test Conditions: I F=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Appli ed Reverse Voltage of 4.0 V D.C. 3. Mount on Cu-Pad Size 16mm x 16mm on PCB.
- 245 - RATINGS AND CHARACTERISTIC CURVES (SF31G THRU SF38G) FIG.5- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 2 5 10 20 100 50 100 125 150 175 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine Wave JEDEC Method FIG.4- TYPICAL FORWARD CHARACTERISTICSFIG.3- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT .( A ) 0 20 40 60 80 100 120 140 0.01 0.1 100 1000 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) Tj=25 C0 Tj=125 C0 Tj=75 C0 FIG.6- TYPICAL JUNCTION CAPACITANCE JUNCTION CAP ACITANCE.(pF) 0.1 0.5 1 5 2 10 20 50 100 200 500 1000 100 120 140 REVERSE VOLTAGE. (V) SF31G~SF34G SF35G~SF38G Tj=25 C0 FIG.2- MAXIMUM AVERAGE FORWARD CURRENT DERATING FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM AVERAGE FOR WARD CURRENT . (A) 50/c87 NONINDUCTIVE /c49/c87 NON INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) DUT (+) 50Vdc (approx) (-) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms (-) (+) 10/c87 NONINDUCTIVE -1.0A -0.25A +0.5A trr 1cm SET TIME BASE FOR 5/ 10ns/ cm 25 50 75 100 125 150 175 1.0 0.5 1.5 2.5 2.0 3.0 AMBIENT TEMPERATURE. ( C) o Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length INSTANTANEOUS FOR WARD CURRENT . (A) 0.01 0.1 100 FORWARD VOLTAGE. (V) Tj=25 C Pulse Width=300 s 1% Duty Cycle o SF31G~SF34G SF35G~SF36G SF37G~SF38G