DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
www.RFM.com E-mail: info@rfm.com Page 1 of 5 © 2010-2012 by RF Monolithics, Inc. SF2252E - 1/3/12
Electrical Characteristics
Characteristic Sym Notes Min Typ Max Units Center Frequency f C 1590 MHz Minimum Insertion Loss IL 2.3 4.0 dB Amplitude Ripple 1.0 1.8 dB P-P 1.2 dB Bandwidth BW 1.2 55 59 65 MHz 20 dB Bandwidth BW 20 97 125 MHz Ultimate Rejection 50 dB Terminating Source impedance Z L 50 Terminating Load impedance Z L 50 Single Ended Input / Output Impedance match No matching network required for operation at 50 ohms Case Style SM3030-6 Lid Symbolization 993
- Low-loss RF SAW Filter
- 3.0 x 3.0 x 1.4 mm Surface-mount Case
- No Matching Required for 50 Operation
- Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units Incident Power in Passband +10 dBm DC Voltage on any Non-ground Terminal 3 VDC Operating Temperature Range -55 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C Maximum Soldering Profile, 5 cycles/ 10 seconds maximum 265 °C
1590 MHz
- US and international patents may apply. 2. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. Pb CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: SM3030-6
www.RFM.com E-mail: info@rfm.com Page 2 of 5 © 2010-2012 by RF Monolithics, Inc. SF2252E - 1/3/12 Matching Circuit /G53 /G46 /G32 /G31 /G37 /G31 /G45 /G35 /G30 /G20 /G6F /G68 /G6D /G35 /G30 /G20 /G6F /G68 /G6D /G32 /G35 /G31 /G2C /G20 /G33 /G2C /G20 /G34 /G2C /G20 /G36 SF2252E Frequency Response Plots
www.RFM.com E-mail: info@rfm.com Page 3 of 5 © 2010-2012 by RF Monolithics, Inc. SF2252E - 1/3/12 VSWR Plots
www.RFM.com E-mail: info@rfm.com Page 4 of 5 © 2010-2012 by RF Monolithics, Inc. SF2252E - 1/3/12 TOP VIEW BOTTOM VIEW A BC D J EF GH I 993 YWWS /G4B /G4B /G4F /G4D /G4D /G4E /G4E /G4E /G4C 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Case Materials Dimension mm Inches Min Nom Max Min Nom Max K 3.20 0.126 L 1.70 0.067 M 1.05 0.041 N 0.81 0.032 O 0.38 0.015 Materials Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free PCB Footprint Top View
www.RFM.com E-mail: info@rfm.com Page 5 of 5 © 2010-2012 by RF Monolithics, Inc. SF2252E - 1/3/12 Tape and Reel Specifications “B” Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13.0 20.22.0 12.0 100 REF. "B" REF. COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W 12.0 mm RO.3 (MAX.) Ko SECTION A-A 0.3 ± 0.05 SECTION B-B Bo 2.0 4.0 Ao Pitch B B A R0.5 (MAX.) A 5.5 12.0 1.75 1.5 1.50PIN #1 USER DIRECTION OF FEED