SF2163E RFM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
www.RFM.com E-mail: info@rfm.com Page 1 of 6 ©2009-2010 by RF Monolithics, Inc. SF2163E - 7/19/10
Electrical Characteristics
Characteristic Sym Notes Min Typ Max Units Center Frequency fC 1076.06 MHz Maximum Insertion Loss, 1056.06 to 1096.06 MHz ILMAX 3.5 5.5 dB 1.5 dB Bandwidth 52 MHz Amplitude Ripple, 1056.06 to 1096.06 MHz 1.0 2.2 dB Attenuation, Referenced to ILMAX 50 to 994.04 MHz 45 53 dB 1158.20 to 3150 MHz 40 50 3150 to 6000 MHz 18 20 Group Delay Ripple, 1056.06 to 1096.06 MHz 15 40 nsP-P Case Style SM3030-8 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator 859, YWWS Standard Reel Quantity Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel SM3030-8
- SAW Filter for Digital Television Complies with Directive 2002/95/EC (RoHS) Characteristics : Balance-to-Balanced Operation Terminating Source/Load Impedance : ZS = 150 Ω Maximum Rating Rating Value Units Input Power Level 0 dBm DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C Maximum Soldering Profile, 5 cycles/ 10 seconds maximum 265 °C
1076.06 MHz
- US and international patents may apply. 2. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. Pb CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: Preliminary Electrical Connection Connection Terminals Port 1 Balanced Input 1,2 Port 2 Balanced Output 5,6 Ground All Others Dot Indicates Pin 1
www.RFM.com E-mail: info@rfm.com Page 2 of 6 ©2009-2010 by RF Monolithics, Inc. SF2163E - 7/19/10 Filter S11, S22 and S21 Plots Filter Near-in Rejection
www.RFM.com E-mail: info@rfm.com Page 3 of 6 ©2009-2010 by RF Monolithics, Inc. SF2163E - 7/19/10 Filter Broadband Rejection Filter Passband Amplitude and Group Delay Detail
www.RFM.com E-mail: info@rfm.com Page 4 of 6 ©2009-2010 by RF Monolithics, Inc. SF2163E - 7/19/10 Tuning Network, 150 ohm Balanced Source/Load L1 22 nH L2 24 nH
www.RFM.com E-mail: info@rfm.com Page 5 of 6 ©2009-2010 by RF Monolithics, Inc. SF2163E - 7/19/10 A B C H E F G D 859 YWWS /G49 /G49 /G4A /G4A /G4A /G4B /G4B /G4C /G4D /G4E /G4E /G4F /G4F 8-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint TOP VIEW BOTTOM VIEW PCB Footprint Top View Case Materials Materials Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free Dimension mm Inches Min Nom Max Min Nom Max I 3.19 0.126 J 0.81 0.032 K 0.96 0.038 L 0.81 0.032 M 1.39 0.055 N 0.23 0.009 O 0.38 0.015 Case and PCB Footprint Dimensions
www.RFM.com E-mail: info@rfm.com Page 6 of 6 ©2009-2010 by RF Monolithics, Inc. SF2163E - 7/19/10 Tape and Reel Specifications “B” Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13.0 20.22.0 12.0 100 REF. "B" REF. COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W 12.0 mm RO.3 (MAX.) Ko SECTION A-A 0.3 ± 0.05 SECTION B-B Bo 2.0 4.0 Ao Pitch BB A R0.5 (MAX.) A 5.5 12.0 1.75 1.5 1.50PIN #1 USER DIRECTION OF FEED