SF2151B

SF2151B RFM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

www.RFM.com E-mail: info@rfm.com Page 1 of 5 ©2009 by RF Monolithics, Inc. SF2151B - 2/4/09 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is depen dent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. The design, manufacturing process, and specifications of this filter are subject to change. 5. Tape and Reel Standard Per ANSI / EIA 481. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 8. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.

Electrical Characteristics

Characteristic Sym Notes Min Typ Max Units Nominal Center Frequency f C 1 211.2 MHz Insertion Attenuation αmin 13.5 16.0 dBAmplitude Ripple (p-p) f C ±9.42 MHz ∆α 10 . 3 5 1 . 5 fC ±10.00 MHz 0.45 2.0 Group Delay Ripple (p-p) f C ±10.00 MHz ∆τ 1 20 100 ns Group Delay at f C τ 700 800 VSWR f C ±10.00 MHz 1.2:1 2:1 Relative Attenuation (relative to αmin) 10 ~ 100 MHz 50 dB 100 ~168 MHz 53 dB 168 ~ 196.5 MHz 20 dB 260 ~ 270 MHz 48 dB 270 ~ 360 MHz 45 dB Operating Temperature Range T A 1- 4 0 + 8 5 ° C Case Style 5 SMP-03-S 7 x 5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, S=shift) See note 4 RFM SF2151 YYWWS Connection Terminals Input 10 Output 5 Ground All Others

• IF SAW Filter, 211.2 MHz, 20 MHz BW  Low-loss Filter for WCDMA applications  5.0 X 7.0 x 1.7 mm Surface-mount Case  Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +10 dBm Maximum DC Voltage Between any Two Terminals 30 VDC Storage Temperature Range -40 to +85 °C Maximum Soldering Temperature 265°C for 10 s

211.2 MHz

CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: SMP-03-S /G53 /G46 /G32 /G31 /G35 /G31 /G42 /G31 /G32 /G31 /G31 /G31 /G32 /G33 /G36 /G38 /G37 /G34 /G32 /G37 /G20 /G6E /G48 /G33 /G39 /G20 /G70 /G46 /G4D /G65 /G61 /G73 /G75 /G72 /G65 /G6D /G65 /G6E /G74 /G20 /G43 /G69 /G72 /G63 /G75 /G69 /G74 /G31 /G30 /G39 /G35 /G34 /G33 /G20 /G6E /G48 /G32 /G32 /G20 /G70 /G46 /G33 /G2E /G36 /G20 /G70 /G46 Preliminary

www.RFM.com E-mail: info@rfm.com Page 2 of 5 ©2009 by RF Monolithics, Inc. SF2151B - 2/4/09 CH1 S 11 1 U FS CENTR 211 . 200 MHz SPA N 120 . 000 MHz Cor CH 2 S21 LOG 10 dB/ REF -20 dB CENTER 211 . 200 000 MHz SPAN 120 . 000 000 MH z Cor C H3 S22 1 U FS CE NTR 211 . 2 00 MHz S PAN 120 . 000 MHz Co r

14 Jan 2009 10:18:44

1: 5 9 .8 8 1 14 . 289 10 . 768 nH 211 . 200 000 MHz 23 4 1 : 0 . 0 000 dB 0. 00 0 000 MHz Max REF=1 CH2 Mark ers B W : 22 . 69 2606 MHz cent : 210 . 9 46526 MHz Q: 9. 2 95 8 1_ loss : -13 . 38 4 dB 1: 4 6 . 2 7 9 -6 . 0742 124 . 06 pF 211 . 20 0 0 00 MHz SF2151B #29 De sig n 2 Full Full CH2 S21 LO G 10 dB/ RE F -2 0 d B STA RT 11 . 200 000 MHz S TO P 1 0 00 . 000 000 MHz Cor

14 Jan 2009 10:20:38

1 : 0 . 0000 dB 0. 000 000 MHz Ma x REF=1 CH2 Mark ers B W : 22 . 68 70 26 MHz ce nt : 210 . 8 43037 MHz Q : 9 . 2936 1_ loss : -14 . 415 d B SF215 1B Resp Filter Response and Impedance Plots Filter Ultimate Rejection Plot

www.RFM.com E-mail: info@rfm.com Page 3 of 5 ©2009 by RF Monolithics, Inc. SF2151B - 2/4/09 CH 1 S2 1 DEL 5 0 n s/ REF 900 ns CENTER 211 . 200 000 MHz SP AN 40 . 000 000 MHz Smo CH2 S2 1 LOG 1 0 d B/ REF -2 0 d B

14 Jan 2009 10:18: 03

3: - 2 .0 2 1 8 n s - 2 0 .0 0 0 0 0 0 M H z REF=2 CH1 Marker s me an : 7 06 . 52 n s s . de v : 3 . 67 12 ns p-p : 16 . 74 7 ns 1 2 3 : . 788 40 dB -20 . 00 0 0 00 M Hz REF=2 CH2 Marker s me an : -1 4 . 1 16 dB s . de v : . 18 440 dB p-p : 1 . 069 9 dB SF 215 1 B #2 9 Design 2 CH1 S1 1 SW R 1 / REF 1 CENTER 211 . 200 00 0 MHz SPAN 120 . 0 00 00 0 MHz Cor CH2 S 22 SWR 1 / RE F 1 . 53 7 Cor

14 Jan 2009 10:17:15

4 : 1 . 720 6 22 2 . 272 7 84 MHz CH 1 Markers 1 : 1. 3 7 09 21 1 . 20 0 M Hz 2 : 1. 7 3 79 22 1 . 20 0 M Hz 3 : 1. 7 7 87 20 1 . 20 0 M Hz 4 : 1 . 751 3 22 2 . 272 7 84 MHz CH 2 Markers 1 : 1. 1 6 19 21 1 . 20 0 M Hz 2 : 1. 8 4 88 22 1 . 20 0 M Hz 3 : 1. 5 4 12 20 1 . 20 0 M Hz SF2151B #29 Design 2 Full Full Filter Passband Group Delay and Amplitude Plots Filter Input and Output VSWR Plots (matched)

www.RFM.com E-mail: info@rfm.com Page 4 of 5 ©2009 by RF Monolithics, Inc. SF2151B - 2/4/09 SMP-03-S Case 12-Terminal Ceramic Surface-Mount Case 5 x 7 mm Nominal Footprint Case Dimensions Dimension mm Inches Min Nom Max Min Nom Max C 1.65 2.00 0.065 0.079 D 0.80 J 2.54 Materials Solder Pad Termination Au plating 30 - 60 µinches (76.2-152 µm) over 80- 200 µinches (203-508 µm) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phos- phorus) 100-200 µinches Thick Body Al 2O3 Ceramic Pb Free

www.RFM.com E-mail: info@rfm.com Page 5 of 5 ©2009 by RF Monolithics, Inc. SF2151B - 2/4/09 Tape and Reel Specifications “B “ Quantity Per Reel Inches millimeters 7 178 500 13 330 2000 USER DIRECTION OF FEED COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 5.5 mm Bo 7.5 mm Ko 2.0 mm Pitch 8.0 mm W 16.0 mm PIN #1 See Detail "A" 13.0 20.22.0 12.0 100 REF. "B" REF. 16.0