SF2136E RFM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

www.RFM.com E-mail: info@rfm.com Page 1 of 5 ©2009-2011 by RF Monolithics, Inc. SF2136E - 2/10/11

Electrical Characteristics

Characteristic Sym Notes Min Typ Max Units Center Frequency fC 433.92 MHz 3 dB Bandwidth 5M H z Insertion Loss, 433.05 to 434.79 MHz IL 2.0 3.3 dB Amplitude Ripple, p-p, 433.05 to 434.79 MHz 0.3 1.5 Attenuation Referenced to 0 dB: 389.0 to 392.0 MHz 42 54 411.0 to 414.0 MHz 40 50 454.0 to 457.0 MHz 40 51 475.0 to 478.5 MHz 42 52 863.0 to 870.0 MHz 41 35 Source Impedance Z S 50 Ω Load Impedance ZL 50 Ω Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization, Y=year, WW=week, S=shift, Dot=pin 1 indicator 682, YWWS Standard Reel Quantity Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Connection Terminals Input 2 Output 5 Case Ground All others SM3030-6

  • Steep Roll-off Filter for 433.92 MHz Unlicensed Band  No Matching Required for Operation in 50 Ω Environment  Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units Input Power Level 10 dBm DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C Maximum Soldering Profile, 5 Cycles/10 seconds Maximum 265 °C

433.92 MHz

  1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is depen dent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. The design, manufacturing process, and specifications of this filter are subject to change. 5. US and international patents may apply. 6. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. Pb CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes:

www.RFM.com E-mail: info@rfm.com Page 2 of 5 ©2009-2011 by RF Monolithics, Inc. SF2136E - 2/10/11 SF2136E Frequency Response Plots CH 1 S2 1 LO G 10 dB/ REF -4 0 d B CENTER 433 . 9 20 000 MHz S PAN 1 00 . 000 0 00 MHz

15 Oct 2010 22:56:43

5 : -51 . 17 0 dB 4 54 . 000 000 MHz CH1 Mark ers 1 : -53 . 099 dB 38 9 . 000 MHz 2 : -52 . 868 dB 39 2 . 000 MHz 3 : -51 . 531 dB 41 1 . 000 MHz 4 : -48 . 401 dB 41 4 . 000 MHz sf2136 e

www.RFM.com E-mail: info@rfm.com Page 3 of 5 ©2009-2011 by RF Monolithics, Inc. SF2136E - 2/10/11 CH 1 S 21 L OG 1 dB/ R EF - 1.0 11 dB CENTER 433 . 920 000 MHz SPAN 10 . 000 000 MHz C

15 Oct 2010 22:59:11

2 :- . 06 77 0 d B 1. 7 40 0 0 0 MHz REF= 1 CH1 Markers mean : -1 . 7339 dB s . d ev : . 0 424 0 dB p-p : . 16 000 dB sf2136 e RIPPL E Resp

www.RFM.com E-mail: info@rfm.com Page 4 of 5 ©2009-2011 by RF Monolithics, Inc. SF2136E - 2/10/11 /G4B /G4B /G4F /G4D /G4D /G4E /G4E /G4E /G4C 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint SM3030-6 Case Top View Bottom View Case and PCB Footprint Dimensions Case Materials Dimension mm Inches Min Nom Max Min Nom Max K 3.20 0.126 L 1.70 0.067 M 1.05 0.041 N 0.81 0.032 O 0.38 0.015 Materials Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free PCB Footprint Top View A BC D J EF GH I 682 YWWS

www.RFM.com E-mail: info@rfm.com Page 5 of 5 ©2009-2011 by RF Monolithics, Inc. SF2136E - 2/10/11 Tape and Reel Specifications “B“ Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13.0 20.22.0 12.0 100 REF. "B" REF. COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W1 2 . 0 m m RO.3 (MAX.) Ko SECTION A-A 0.3 ± 0.05 SECTION B-B Bo 2.0 4.0 Ao Pitch BB A R0.5 (MAX.) A 5.5 12.0 1.75 1.5 1.50PIN #1 USER DIRECTION OF FEED