SF1A200H AUK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Ultra-fast reverse recovery time: trr=30ns Max.
  • Small & compact type SMD package
  • Low forward voltage & low reverse current
  • Low switching loss

Ordering Information

Type No. Marking Package Code SF1A200H 1A2H SOD-106 O u t l i n e D i m e n s i o n s u n i t : mm SSeemmiiccoonndduuccttoorr 1. Anode 2. Cathode 2 1 4.60~5.00 1.49 Max. 3.90~4.10 2.50~2.70 Cathode Mark 1.25~1.35 0.27 Max.

  • PIN Connections

Absolute Maximum Ratings [ T a = 2 5 °C] Characteristic Symbol Rating Unit Repetitive peak reverse voltage V RRM 200 V Average rectified output current I O 1.0 A Peak forward surge current (Non-repetitive 60Hz sine wave) IFSM 20 A Junction temperature T J 150 °C Storage temperature range T stg -45 ~ 150 °C E l e c t r i c a l C h a r a c t e r i s t i c s [Ta=25°C] Characteristic Symbol Test Condition Min. Typ. Max. Unit Peak forward voltage V FM 1) I F=1A - - 0.98 V Repetitive peak reverse current I RRM V R=200V - - 10 ㎂ Reverse recovery time t rr IF=0.5A, di/dt=-100A/㎲ - - 30 ns Thermal resistance R th Junction to ambient 2) - - 76 °C/W 1) Pulse test : tP≤380 ㎲, Duty cycle≤2% 2) Device mounted on glass epoxy PCB (recommanderable minimum solder land) ※ Recommend PCB solder land [Unit : mm] SF1A200H

Electrical Characteristic Curves SF1A200H p d Fig. 3 P F - IO Fig.1 I F - VF Fig. 5 I FSM – Number of cycle Fig. 6 I O derating - TC Fig. 4 C J - VR Fig. 2 I R - VR

The AUK Corp. products are intended for the use as components in general electronic equipment (Office and co mmunication equipment, m easuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to th e welfare of human life(atomi c energy control, airplane, spaceship, transportation, co mbustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equi pments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice.