SF14111900B3906T WALSIN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Page 1 of 8 ASC_SF14111900B3906T_V02 Nov.2016 RF SAW Filter Series – RoHS Compliance LTE Band 39 system For TRx Single Type 1880~1920 MHz Band Working Frequency P/N：SF14111900B3906T *Contents in this sheet are subject to change without prior notice.
Page 2 of 8 ASC_SF14111900B3906T_V02 Nov.2016
Features
Low loss, Low pass band ripple： Single to single operation ： Impedance at input and output 50 Ohm： Package for Surface Mount Technology (SMT) ： Electrostatic Sensitive Device (ESD) ： Ultra small package：(1.4mm × 1.1mm x 0.65mm) ： RoHS Compliance： Moisture Sensitive Level 3 (MSL3) ： Application LTE Band 39 system Package Dimensions 0.250.075 0.5 0.1 0.25 0.325 [5][4] 1.4 ± 0.13 1.1 ± 0.13
0.65 Max
Top View Side View Bottom View [2][3] [1] [5] [4] [2] [3] [1] 0.5 Unit：mm Marking Descriptions Marking Description ⓒ Series Number X Date Code (Year+Month) Test Circuit 2,3,5 Input Output L=18 nH L=18 nH Pin Descriptions Pin Description Pin Description [1] Input [4] Output [2] GND [5] GND [3] GND ⓒ X
Page 3 of 8 ASC_SF14111900B3906T_V02 Nov.2016 Electrical Specifications Item Frequency (MHz) Specification Unit Min Typ Max Center frequency - - 1900 - MHz Insertion loss 1880 ~ 1920 - 1.6 1.9 dB Pass band ripple 1880 ~ 1920 - 0.8 1.2 dB VSWR Input 1880 ~ 1920 - 2.0 2.2 - Output - 2.0 2.2 - Absolute attenuation 10 ~ 1605.9 27 31 - dB 800 ~ 960 27 31 - dB 1805 ~ 1830 40 49 - dB 1830 ~ 1850 10 30 - dB 2010 ~ 2025 40 47 - dB 2300 ~ 2400 40 46 - dB 2400 ~ 2500 40 48 - dB 2500 ~ 2690 40 49 - dB 2690 ~ 5000 35 46 - dB Terminating impedance Input 50 Ohm Output 50 Ohm Note：With matching network (Ref. testing environment circuit as shown above). Absolute Maximum Ratings Item Rating Unit DC permissive voltage 0 V Maximum input power 28 dBm Operating temperature range -30 ~ +85 ℃ Storage temperature range -40 ~ +85 ℃
Page 4 of 8 ASC_SF14111900B3906T_V02 Nov.2016 Typical Frequency Response Input-Output insertion
Page 5 of 8 ASC_SF14111900B3906T_V02 Nov.2016 VSWR Smith chart
Page 6 of 8 ASC_SF14111900B3906T_V02 Nov.2016 Solder Land Pattern 0.425 0.25 0.25 0.425 0.25 0.325 0.25 0.325 0.325 0.525 0.525 1.3 0.425 0.25 0.25 0.425
0.25 Land Pattern
1.6 Unit：mm
Test Procedure/Test method Requirements Vibration *Frequency：10Hz ~ 55Hz *Total amplitude：1.5mm *Sweep period：1.0 minute *Vibration directions：3 mutually perpendicular *Duration：2 hours / direct After the test, specimen would be kept at room temperature for 2 hours. And then the measured values shall fulfill the Electrical Specifications. Drop test *Height：1.0 m *Test surface：Rigid surface of concrete or steel *Times：10 times Static humidity *Relative humidity：90% *Duration：96 hours Temperature cycling 1. 30 minutes at -40℃, ： 2. 30 minutes at +85℃, ： *cycle time：100 times： High temperature exposure *Exposure temperature：85℃ 5℃ *Exposure duration：240 hours Low temperature exposure *Exposure temperature：-40℃ 5℃ *Exposure duration：240 hours Reflow soldering *Temperature / Duration：275℃ / 10sec *Total time：6 minute (IR-reflow)
Page 7 of 8 ASC_SF14111900B3906T_V02 Nov.2016 Soldering Condition Ordering Code SF 1411 1900 B39 06 T Series SF：SAW Filter Dimension code Per2 digits of Length, Width 1411= Length 1.4mm Width 1.1mm Frequency 1900：Center Freq (1900MHz) Application B39：LTE Band 39 Serial Number Design Code Packing T：Reeled Packing w F E Ao PoP2P1 Bo D T Plastic Tape specifications Index Ao Bo D T W Index E F Po P1 P2 ○c X ○c X ○c X ○c X ○c X
Page 8 of 8 ASC_SF14111900B3906T_V02 Nov.2016 Reel Dimensions A B C Index A B C Note：The product shall be packed properly not to be damaged during transportation and storage. Taping Quantity：3000 pieces per 7”reel Caution Of Handling Limitation of Applications Please contact us before using our products for the applications listed b elow which require especially high reliability for the prevention of defects, which might directly cause damage to the third party’s life, body or property. (1) Aircraft equipment (2) Aerospace equipment (3) Undersea equipment (4) Medical equipment (5) Disaster prevention / crime prevention equipment (6) Traffic signal equipment (7) Transportation equipment (vehicles, trains, ships, etc.) (8) Applications of similar complexity and /or reliability requirements to the applications listed in the above. Storage Condition (1) Products should be used in 6 months from the day of WALSIN outgoing inspection, which can be confirmed. (2) Storage environment condition. Products should be storage in the warehouse on the following conditions. Temperature : -10 to +40°C Humidity : 30 to 70% relative humidity Don’t keep products in corrosive gases such as sulfur. Chlorine gas or acid or it may cause oxidization of electrode, resulting in poor solderability. Products should be storage on the palette for the prevention of the influence from humidity, dust and son on. Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on. Products should be storage under the airtight packaged condition. Important Notes (1) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. (2) Cleaning agent isopropyl alcohol and ethyl alcohol can be used. (3) As rapid temperature change for cleaning after reflow soldering might be a cause of degradation or destruction, clean this component after confirming that temperature of this component goes down to room temperature. (4) As ultrasonic vibration might be a cause of degradation or destruction, do not use ultrasonic cleaning. (5) This device follows JEDEC standards for moisture classifications. The following this device is classified as Moisture Sensitive Level 3 This device is moisture sensitive and need to be handled within proper MSL 3 guidelines to avoid damage from moisture absorption and exposure to solder reflow temperatures that can result in yield and reliability degradation (6) This is an Electrostatic Sensitive Device. Please avoid static voltage during operation and storage. (7) Sudden change of temperature shall be avoided, deterioration of the characteristics can occur. (8) If any malfunction due to designing or manufacturing which is out of specification occurs within one year after the products have been delivered, the maker should exchange the defective products.