SF1111A RFM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 E-mail: info@rfm.com Page 1 of 3 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SF1111A-121504

Electrical Characteristics

160.000 MHz Passband Insertion Loss at fc IL 11.0 dB 1.5 dB Passband BW1.5 1, 2 ±590 kHz 3 db Passband BW3 ±750 Amplitude Ripple over fc±470 kHz 0.7 1.0 dB Phase Linearity over fc ±590 kHz °rms Rejection fc-10.0 to fc-1.25 and fc+1.25 to fc+10.0 MHz 1, 2, 3 dB fc-20 to fc-10.0 and fc+10.0 to fc+20 MHz Operating Temperature Range TA -20 +70 SMP-97 Designed for CDMA2000 BTS Applications Simple External Impedance Matching Hermetic SMP-97 Surface-Mount Case Unbalanced Input and Output Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +10 dBm Max. DC voltage between any 2 terminals VDC Storage Temperature Range -40 to +85 Suitable for lead-free soldering - Max. Soldering Profile 260°C for 30 s

160 MHz

Notes: Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." The design, manufacturing process, and specifications of this filter are subject to change. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the fil- ter must always be installed in one direction per the circuit design. US and international patents may apply. Electrostatic Sensitive Device. Observe precautions for handling. Connection Terminals Port 1 Hot Port 1 Gnd Return Port 2 Hot Port 2 Gnd Return Case Ground All others Electrical Connections Impedance Matching to 50 Ω Unbalanced External L-C Case Style SMP-97 24.6 x 9 mm Nominal Footprint Lid Symbolization (YY = year, WW = week) RFM SF1111A YYWW Pb

160 MHz SAW Filter

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 E-mail: info@rfm.com Page 2 of 3 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SF1111A-121504

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 E-mail: info@rfm.com Page 3 of 3 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SF1111A-121504 Materials Solder Pad Termination Au plating 30 - 60 uInches (76.2-152 uM) over 80- 200 uInches (203-508 uM) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 uInches Thick Body Al2O3 Ceramic Pb Free Dimension mm Inches Min Nom Max Min Nom Max A 24.41 24.64 24.94 0.961 0.970 0.982 B 8.80 8.99 9.30 0.349 0.354 0.366 C 1.75 2.00 0.069 0.079 D 2.29 0.090 E 1.02 0.040 H 1.0 0.039 M 4.83 0.190 N 3.40 0.134 P 1.905 0.075 Connection Terminals Port 1 Input or Return Return or Input Port 2 Output or Return Return or Output Ground All others Single Ended Operation Return is ground Differential Operation Return is hot 10-Terminal Ceramic Surface-Mount Case 24.6 x 9 mm Nominal Footprint SMP-97 Case Electrical Connections Case Dimensions A B C H D P (8 Places) E (10 Places) M N TOP VIEW BOTTOM VIEW