SF1001G TSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

/cuspopen Low forward voltage drop /cuspopen High current capability /cuspopen High reliability /cuspopen High surge current capability Mechanical Data /cuspopen Case: Molded plastic /cuspopen Epoxy: UL 94V-O rate flame retardant /cuspopen Terminals: Leads solderable per MIL-STD- 2 0 2 , M e t h o d 2 0 8 g u a r a n t e e d /cuspopen Polarity: As marked /cuspopen High temperature so ldering guaranteed: 2 6 0 oC/10 seconds .16”,(4.06mm) from c a s e . /cuspopen Weight: 2.24 grams TO-220 Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol SF 1001G SF 1002G SF 1003G SF 1004G SF 1005G SF 1006G SF 1007G SF 1008G Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 300 400 500 600 V Maximum RMS Voltage VRMS 35 70 105 140 210 280 350 420 V Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 500 600 V Maximum Average Forward Rectified Current .375 (9.5mm) Lead Length @TC = 100℃ I(AV) 10.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 125 A Maximum Instantaneous Forward Voltage @ 5.0A VF 0.975 1.3 1.7 V Maximum DC Reverse Current @ TA=25℃at Rated DC Blocking Voltage @ TA=100℃ IR 10.0 400 uA uA Maximum Reverse Recovery Time (Note 1) Trr 35 nS Typical Junction Capacitance (Note 2) Cj 70 50 pF Typical Thermal Resistance (Note 3) RθJC 3.5 ℃/W Operating Temperature Range TJ -65 to +150 ℃ Storage Temperature Range TSTG -65 to +150 ℃ Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 3. Mounted on Heatsink Size of 2 in x 3 in x 0.25 in Al-plate.

  • 273 - FIG.3- TYPICAL REVERSE CHARACTERISTICS 0 20 40 60 80 100 120 140 1000 0.1 100 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) TJ=25 C0 TJ=100 C0 INSTANTANEOUS REVERSE CURRENT .( A ) FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50/c87 NONINDUCTIVE /c49/c87 NON INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) DUT (+) 50Vdc (approx) (-) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms (-) (+) 10/c87 NONINDUCTIVE -1.0A -0.25A +0.5A trr 1cm SET TIME BASE FOR 5/ 10ns/ cm RATINGS AND CHARACTERISTIC CURVES (SF1001G THRU SF1008G) FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 0 50 100 150 CASE TEMPERATURE. ( C) o FIG.4- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG PEAK FOR WARD SURGE CURRENT . (A) 1 2 5 10 20 100 50 NUMBER OF CYCLES AT 60Hz TJ=125 C0 8.3ms Single Half Sine Wave JEDEC Method FIG.5- TYPICAL JUNCTION CAPACITANCE PER LEG CAPACITANCE.(pF) 15 2 10 20 50 100 200 500 100 REVERSE VOLTAGE. (V) Tj=25 C0 SF1001G~SF1004G SF1005G~SF1008G FIG.6- TYPICAL FORWARD CHARACTERISTICS PER LEG INSTANTANEOUS FOR WARD CURRENT . (A) 0.01 0.1 0.03 0.3 100 FORWARD VOLTAGE. (V) Tj=25 C Pulse Width=300 s 1% Duty Cycle o SF1001G~SF1004G SF1005G~SF1006G SF1007G~SF1008G 150 120 40 1000 TJ=75 C0