SF0915BA02502S SPECTRUM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

915 MHz SAW Filter

26 MHz Bandwidth

Part Number: SF0915BA02502S IDT •• •• SAW Products •• •• 324 Clark Street, Worcester, MA 01606, USA •• •• Ph 1-508-852-5400 •• •• Fax 1-508-852-8456 www.idt.com SF0915BA02502S Rev B 8-Aug-2008 ECN 36038 Page 1 of 3

DESCRIPTION

  • 915 MHz SAW bandpass filter with 26 MHz bandwidth.
  • 3 x 3 mm ceramic LCC package.
  • RoHS compliant. TYPICAL PERFORMANCE

Part Number: SF0915BA02502S IDT •• •• SAW Products •• •• 324 Clark Street, Worcester, MA 01606, USA •• •• Ph 1-508-852-5400 •• •• Fax 1-508-852-8456 www.idt.com SF0915BA02502S Rev B 8-Aug-2008 ECN 36038 Page 2 of 3 SPECIFICATION Notes: 1. Fixed reference point. 2. Evaluated over 902 to 928 MHz. MAXIMUM RATINGS Parameter Min Max Units Storage Temperature Range -40 85 ˚C Operating Temperature Range -10 70 ˚C Input Power Level - 10 dBm DC Voltage - 10 Volts MATCHING CIRCUIT Notes: 1. Matching components are not required; 50 ohm single-ended system. Parameter Min Typ Max Units Center Frequency (FC) 1 - 915.0 - MHz Bandwidth (3dB) 26 34 - MHz Insertion Loss 2 - 2.8 3.3 dB Passband Amplitude Ripple 2 - 1.1 1.5 dB Stopband Rejection, 10-800 MHz 50 55 - dB Stopband Rejection, 800-845 MHz 45 50 - dB Stopband Rejection, 845-880 MHz 35 40 - dB Stopband Rejection, 947-992 MHz 15 18 - dB Stopband Rejection, 992-1020 MHz 35 40 - dB Stopband Rejection, 1020-1200 MHz 45 50 - dB Temperature Coefficient of Frequency -30 ppm/°K Source and Load Impedance 50 Ω //0nF

Part Number: SF0915BA02502S IDT •• •• SAW Products •• •• 324 Clark Street, Worcester, MA 01606, USA •• •• Ph 1-508-852-5400 •• •• Fax 1-508-852-8456 www.idt.com SF0915BA02502S Rev B 8-Aug-2008 ECN 36038 Page 3 of 3 PACKAGE OUTLINE SUGGESTED FOOTPRINT MARKING ISO 9001 Registered All specifications are believed to be accurate and reliable. However, MNC reserves the right to make changes without notice. © 2006 All rights reserved. Units: mm Typical tolerances are ±0.15 mm except where indicated. Pad Configuration: Input: 2 Output: 5 Ground: 1,3,4,6 Package Material: Body: Al 2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating