SF08-M1JN-B

SF08-M1KTB-R PATLITE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 5

Technical content

[1.General Specifications] Environmental Condition More than 3MΩ at 500V DC between live part Insulation Resistance and non-current carrying metallic part Upright 0.27kg SF08-M1KTB SF08-M1KTN EMC Directive EN61000-6-2 EN61000-3-2, EN61000-3-3 EN IEC 63000 180 rpm[High Speed], 120 rpm[Middle Speed], 60 rpm[Low Speed] FCC EN61000-6-4 RoHS Directive FCC Part15 SubpartB ClassA, ICES-003 ClassA Rotation Flashing Rate(Typ.) Due to the characteristics of the LED elements, there may be a slight variation in color tone and brightness between products. Conforms to the CE Requirements Conforms to the UKCA Requirements in indoor industrial control equipment. KC KN61000-6-4, KN61000-6-2 Conformity Standards With Buzzer UL and Low Voltage Directive have been evaluated for use and non-current carrying metallic part without breaking insulation 0.19A 7.4W 0.20A More than 1MΩ at 500V DC between live part Less than 90 % (No condensation) Operating Ambient Temperature 0.08A IP23 Rated Current Consumption Max. No Buzzer With Buzzer Rated Power Consumption Max. No Buzzer 90-250V AC 7.7W 7.7W -20℃ to +50℃ 8.2W 0.64A 8.8W 24V DC 100V AC 0.34A 8.5W Remarks 0.62A 0.32A Operating Ambient Humidity -30℃ to +60℃ Withstand Voltage Protection Rating Less than 90 % (No condensation) Multi-function Beacons SPECIFICATIONS Drawing No. Rev. SF08-M1JN-W18 H Page 10-30V DC Rated Voltage 12-24V DC 100-240V AC (50/60Hz) 240V AC Product Name Operating Voltage Range Model 12V DC Single-flash(60 flashes per minute), Double-flash(90 flashes per minute) Sound Pressure Level (Typ.) Storage Ambient Temperature Mounting Direction SF08-M1JN 0.27kg SF08-M2JN Storage Ambient Humidity Mounting Location and non-current carrying metallic part Measured at 1m from the front of the Buzzer Opening 0.24kg Outdoor : Upright Environmental Condition Indoor/Outdoor Indoor : Upright, Inverted & Sideways SF08-M□JN SF08-M□KT□ IP66/NEMA TYPE 4X,13 IP65(when used with SZW-102 Rubber Gasket attachment) 86dB Triple-flash(120 flashes per minute), Pulse pattern(20 flashes per minute) and non-current carrying metallic part without breaking insulation UL UL508, CSA-C22.2 No.14 (UL File No.E215660) 0.25kg SF08-M2KTB 0.28kg 500V AC applied for 1min between live part 4,000V AC applied for 1min between live part Low Voltage Directive IEC/EN60947-5-1,EN62471 EN61000-6-4, EN61000-6-2 0.3kg SF08-M2KTNMass (Typ.) Flashing Rate(Typ.)

■Rated Voltage ■Installation・Wiring・Buzzer ■LED Unit Color ： 12-24V DC ： 3-screw Mounting・Cabtyre Cord・No Buzzer R ： Red ： 100-240V AC ： 2-point Hole Type Mounting・Terminal Block・No Buzzer Y ： Amber ： 2-point Hole Type Mounting・Terminal Block・With Buzzer G ： Green B ： Blue [mm] M2 KTN KTB [3.Outer Dimensions] M1 JN

1 K T B - R

[2.Model Number Configuration] S F 0 8 - M Drawing No. Rev. Page SF08-M1JN-W18 H ・Maximum Board Thickness ：9 Plain Washer(M4) Nut(M4) SUS SUS 3 pcs. 3 pcs. Accessory(Only SF08-M□JN） ■SF08-M1JN/SF08-M2JN Nameplate From the cord outlet 500±30 3-M4 (SUS) φ80 121 16(13) φ7.7

[mm]

3 Cabtyre Cord UL2464, PVC, M1JN : AWG22×5, M2JN : AWG18×2+AWG24×3

5 Mounting Bracket PC

6 Waterproof Sheet Silicone

2 Case PC

4 Terminal Block

LCP GF, Applicable Wire Size Solid Wire : 0.13-1.5mm2 , Stranded Wire : AWG28-14 Number Name Material ・ Specification

1 Globe PC

[3.Outer Dimensions] Drawing No. Rev. Page SF08-M1JN-W18 H ■SF08-M1KTN/SF08-M2KTN ■SF08-M1KTB/SF08-M2KTB 4.4 M4 Nominal Diameter Screw Hole Thickness of Mounting Bracket Buzzer Opening (Models with Buzzer Only) Nameplate Nameplate φ80 120 φ80 126

[mm] ■SF08-M1JN/SF08-M2JN ■SF08-M1KT□/SF08-M2KT□ [4.Mounting Dimensional Drawing] Drawing No. Rev. Page SF08-M1JN-W18 H Recommended Tightening Torque 0.7N・m Recommended Tightening Torque 0.7N・m 4/5

■SF08-M1JN ■SF08-M2JN ■SF08-M1KT□ ■SF08-M2KT□ ※For No Buzzer Models, do not require wiring. ■Flash Pattern List The rotary switch is set to 0 when shipped from the factory. [5.Wiring Example] Drawing No. Rev. Page SF08-M1JN-W18 H CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 OFF OFF ON OFF OFF ON ON ON = Dimmed = Half-side emitted Rotating(120 rpm) Rotating(120 rpm) Rotating(120 rpm) Rotating(120 rpm) Rotating(180 rpm) Rotating(180 rpm) Rotating(180 rpm) Rotating(180 rpm) Pulse pattern Pulse pattern Pulse pattern Pulse pattern Rotating(60 rpm) Rotating(60 rpm) Rotating(60 rpm) Rotating(60 rpm) Off Single-flash Double-flash Triple-flash Triple-flash Triple-flash Triple-flash Triple-flash Off Triple-flash Pulse pattern Triple-flash Off Rotating(60 rpm) Rotating(120 rpm) Rotating(180 rpm) Off Rotating(120 rpm) Triple-flash Rotating(120 rpm) Off Rotating(180 rpm) Triple-flash Rotating(180 rpm) Rotary switch Wiring 【Ext ernal cont act capacit y of power supply line】 M1 M2 Current Capacit y (Is) 3A or more 1A or more 【Ext ernal cont act capacit y of signal line and buzzer line】 ※1 M1 M2 Current Capacit y (Is) 10mA or more 10mA or more Withst and Volt age (Vs) 20V or more 20V or more Leakage Current (IL) 0.1mA or less 0.1mA or less 【Fuse】 Fuse Rat ing 250V 1A ※1 When using NPN t ransist or open collect or.