SF0601BA03160S SPECTRUM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

601 MHz SAW Filter

26 MHz Bandwidth

Part Number SF0601BA03160S IDT • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Ph 1-508-852-5400 • Fax 1-508-852-8456 www.idt.com DSSF0601BA03160S Rev - 02-Dec-2007 ECN 35690 Page 1 of 3

DESCRIPTION

  • 601 MHz SAW bandpass filter with 26 MHz bandwidth.
  • 3.8 x 3.8 mm LCC package.
  • RoHS compliant. TYPICAL PERFORMANCE Horizontal: Frequency - Center : 600 MHz Span : 300 MHz Vertical: Magnitude : 10 dB/div Magnitude : 1 dB/div Group Delay : 20 ns/div

Part Number SF0601BA03160S IDT • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Ph 1-508-852-5400 • Fax 1-508-852-8456 www.idt.com DSSF0601BA03160S Rev - 02-Dec-2007 ECN 35690 Page 2 of 3 SPECIFICATION Parameter Min Typ Max Units Nominal Center Frequency FC - 601 - MHz Passband 588 - 614 MHz Maximum Insertion Loss over the Passband - 4.25 4.5 dB Absolute Delay - 40 - ns Rejection (0.3 to 506 MHz) 1 40 47 - dB Rejection (506 to 526 MHz) 1 38 39 - dB Rejection (526 to 575 MHz) 1 10 14 - dB Rejection (627 to 676 MHz) 1 10 11 - dB Rejection (676 to 696 MHz) 1 20 22 - dB Rejection (696 to 901 MHz) 1 40 42 - dB Rejection (901 to 1056 MHz) 1 40 43 - dB Amplitude Variation over the Passband - 0.9 1.5 dB p-p Group Delay Ripple in Passband - 10 100 ns p-p Source/Load Impedance 50 ohms Temperature Coefficient of Frequency, Tc 2 - -70 - ppm/ ˚C Ambient Temperature (Tref) - 23 - ˚C Notes: 1. Absolute level 2. Typical shift of filter frequency response with temperature is ∆f = (T-Tref)*Tc*Fc. MAXIMUM RATINGS Parameter Min Max Units Storage Temperature Range -45 85 ˚C Operating Temperature Range -20 55 ˚C Input Power Level - 10 dBm MATCHING CIRCUIT Notes

  • 50 ohm single ended operation.
  • Matching components are not required.

Part Number SF0601BA03160S IDT • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Ph 1-508-852-5400 • Fax 1-508-852-8456 www.idt.com DSSF0601BA03160S Rev - 02-Dec-2007 ECN 35690 Page 3 of 3 PACKAGE OUTLINE SUGGESTED FOOTPRINT All specifications are believed to be accurate and reliable. However, MNC reserves the right to make changes without notice. © 2007 All rights reserved. ISO 9001 Registered Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating Units: mm Tolerances are ±0.15 mm except where indicated. Pad Configuration: Input: 2 Output: 5 Ground: 1, 3, 4, 6