SF0199CD02382S APITECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
199 MHz Filter
0.200 MHz Bandwidth for GSM BTS Receiver IF
Part Number SF0199CD02382S Rev X9 1-Feb-05 Page 1 of 4 Integrated Circuit Systems • Surface Acoustic Wave Products
324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456
www.icst.com Systems, Inc. TYPICAL PERFORMANCE 187 190 193 196 199 202 205 208 211 -70 -60 -50 -40 -30 -20 -10 Horizontal: 0.40 MHz/div Horizontal: 3.0 MHz/div Vertical (from top): Magnitude 10 dB/div Vertical: Magnitude 10 dB/div Magnitude 1 dB/div Group Delay 500 ns/div SPECIFICATION Parameter Min Typ Max Units Normal Center Frequency FC 199.00 MHz Insertion Loss at Fc 1 7 8 dB 1 dB Bandwidth 200 470 KHz Passband Ripples over Fc+/-100 KHz 0.25 0.5 dB p-p Group Delay Ripples over Fc+/-100 KHz 175 500 ns p-p Rejection, FC ± (0.600 to 0.800) MHz 20 dB Rejection, FC ± (0.800 to 17.00) MHz 30 dB Rejection, FC ± (17.00 to 80.00) MHz 35 52 dB Operating Temperature Range -35 +85 ° C Impedance Matching to 50 Ω Unbalanced External L-C Impedance Matching to 200 Ω Balanced External L-C Note: 1. All dB values are referenced to the insertion loss value at Fc. QF12/3
Part Number SF0199CD02382S Rev X9 1-Feb-05 Page 2 of 4 Integrated Circuit Systems • Surface Acoustic Wave Products www.icst.com Systems, Inc. PACKAGE AND SUGGESTED PCB FOOTPRINT CD02382S YYWWM 9.10+0.20 -0.10 7.10+0.20 -0.10
2.00 MAX
0.80 10X 1.20 9X1.60 2.54 5.08 2.541.02 ICS
PACKAGE INFORMATION
7.30 SUGGESTED PCB 1.34 2.54 9.30 2.54 1.10 FOOTPRINT 2.62 0.88
DESCRIPTION
1,4,5,6,9,10,11 NOTES: DIMENSIONS SHOWN ARE NOMINAL IN MILLIMETERS. ALL TOLERANCES ARE ±0.15MM EXCEPT OVERALL LENGTH PIN NO. INPUT INPUT RETURN OUTPUT OUTPUT RETURN GROUND AND WIDTH Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5-1.0 um, over a 2-6 um Ni plating MARKING CD02382S YYWWM LOGO ICS THE DATE CODE CONSISTS OF: YY=YEAR, WW=WEEK, M=MANUFACTURING SITE CODE MARKING CODE ESD QF12/3
Part Number SF0199CD02382S Rev X9 1-Feb-05 Page 3 of 4 Integrated Circuit Systems • Surface Acoustic Wave Products www.icst.com Systems, Inc. MATCHING CIRCUIT for Balanced, 200 Ω Impedance at Both Input and Output 3 8 2 7 Typical component values: Cs1 =Cs2=3.3 pF Cs3=Cs4=4.7 pF Ls1 = 72 nH Ls2 = 68 nH Note: Component values may change depending on PCB layout and parasitic. MAXIMUM RATINGS Parameter Min Max Units Operating Temperature Range -35 +85 ºC Storage Temperature Range -45 +85 ºC Maximum Input Power Level 20 dBm D. C. Voltage between Each Terminal 15 V QF12/3
Part Number SF0199CD02382S Rev X9 1-Feb-05 Page 4 of 4 Integrated Circuit Systems • Surface Acoustic Wave Products www.icst.com Systems, Inc. PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS Parameter Qualification Conditions Life Testing High temperature bake at +85 ºC for 168 hours. Temperature Cycling MIL-STD 883, Method 1010: -40 ºC to +85 ºC, 10 cycles, 10 minutes dwell at temperature extremes Vibration MIL-STD-202, Method 201A: 10 to 55 Hz, double amplitude of 0.06” for 2 hours in each axis. Mechanical Shock MIL-STD-883, Method 2002, Test Condition B: 1500 g’s, 3 impacts each axis Solder Heat Resistance and Reflow Condition Peak temperature 240+/-5 ºC for 10 seconds. Pre-heat: 150-170 ºC for 60 to 90 seconds. Peak dwell: over 200 ºC for 23 to 26 seconds. Handling: Class 1 per MIL-STD-1686 Reflow Profile is shown at the bottom of this table. Lead Integrity MIL-STD 883 Method 2004, Condition D 8 oz for 30 seconds. Solderability MIL-STD-883 Method 2003: 245 ºC +/-5 ºC; 95% coverage; no steam aging Hermeticity MIL-STD 883 Method 1014: Condition A2 and Condition C (no bomb) ESD Classification Class I per MIL-STD-883 Method 3015 Precautions Do not subject devices to ultrasonic cleaning, which may cause deterioration and destruction of the device. Reflow Profile 100 150 200 250 0 50 100 150 200 250 300 TIME (sec) TEMP (deg C) ISO 9001 Registered QF12/3