SF0160BA02299S APITECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

160 MHz SAW Filter

9.5 MHz Bandwidth

Part Number: SF0160BA02299S Spectrum Microwave

400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401

www.SpectrumMicrowave.com DSSF0160BA02299S Rev A 11-Mar-2010 ECN 36650 Page 1 of 3

DESCRIPTION

  • 160 MHz SAW bandpass filter with 9.5 MHz bandwidth.
  • 13.3 x 6.5 mm SMP.
  • RoHS compliant. TYPICAL PERFORMANCE Horizontal: Frequency : 6 MHz/div Vertical from top: Relative Magnitude : 10 dB/div Relative magnitude : 1 dB/div Phase Linearity : 5 deg/div Group Delay Deviation : 100 ns/div S11 (130 to 190 MHz) S22 (130 to 190 MHz) 50. ns/"

Part Number: SF0160BA02299S Spectrum Microwave www.SpectrumMicrowave.com DSSF0160BA02299S Rev A 11-Mar-2010 ECN 36650 Page 2 of 3 SPECIFICATION Parameter Min Typ Max Units Center Frequency ( Fc) 1 159.7 160.0 160.3 MHz Insertion Loss at Fc - 19 21 dB 1 dB Passband Width 9.5 10.2 - Lower 1dB Frequency - 154.9 155.2 MHz Upper 1dB Frequency 164.7 165.1 - MHz Lower 30 dB Band Edge 152.0 152.4 - MHz Upper 30 dB Band Edge - 167.6 168.0 MHz Passband Amplitude Ripple 2 - 0.4 0.5 dB p-p Passband Group Delay Ripple 2 - 50 80 ns p-p Rejection (10 to 152 MHz) 45 50 - dB Rejection (168 to 250 MHz) 45 50 - dB Ambient Temperature - 25 - ºC Source / Load Impedance - 50 - Ω Temperature Coefficient of Frequency - -94 - ppm/ ºC Substrate Material YZ Lithium Niobate Notes: 1. Fixed reference frequency. All bandwidths are centered at this frequency. 2. defined over Fc +/- 4 MHz. 3. Dependent on PC board layout. MAXIMUM RATINGS Parameter Min Max Units Storage Temperature Range -40 85 ˚C Operating Temperature Range 20 30 ˚C Input Power Level 10 dBm MATCHING CIRCUIT Note: External matching components are not required. 12 6 11 5 Input 50 Ω Single-ended Output 50 Ω Single-ended GND GND

Part Number: SF0160BA02299S Spectrum Microwave www.SpectrumMicrowave.com DSSF0160BA02299S Rev A 11-Mar-2010 ECN 36650 Page 3 of 3 PACKAGE OUTLINE SUGGESTED FOOTPRINT Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. Units: mm Tolerances are ±0.15 mm except for the overall length, width and pad dimensions, which are nominal values. Pad Configuration: Input: 12 Input return: 11 Output: 6 Output return: 5 Ground: 1,2,3,4,7,8,9,10