SF0156BA02421S APITECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

156 MHz SAW Filter

9.4 MHz Bandwidth

Part Number: SF0156BA02421S Spectrum Microwave

400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401

www.SpectrumMicrowave.com DSSF0156BA02421S Rev A 11-Mar-2010 ECN 36650 Page 1 of 3

DESCRIPTION

  • 156 MHz SAW bandpass filter with 9.4 MHz bandwidth.
  • 13.3 x 6.5 mm LCC package.
  • RoHS compliant. TYPICAL PERFORMANCE Horizontal: Frequency : 5 MHz/div Vertical from Top: Relative Magnitude : 10 dB/div Relative magnitude : 1 dB/div Phase Linearity : 5 deg/div Group Delay Deviation : 100 ns/div S11 (131 to 181 MHz) S22 (131 to 181 MHz)

Part Number: SF0156BA02421S Spectrum Microwave www.SpectrumMicrowave.com DSSF0156BA02421S Rev A 11-Mar-2010 ECN 36650 Page 2 of 3 SPECIFICATION Parameter Min Typ Max Units Center Frequency (Fc) 1 - 156.00 - MHz Minimum Insertion Loss 2 - 20.6 22.0 dB 1 dB Bandwidth 9.40 9.80 - MHz Amplitude Variation (151.3 to 160.7 MHz) - 0.6 1.0 dB p-p Group Delay Ripple (151.3 to 160.7 MHz) - 80 150 ns p-p Relative Attenuation at 141.0 MHz 45 48 - dB Relative Attenuation at 149.7 MHz 40 45 - dB Relative Attenuation at 162.3 MHz 40 45 - dB Relative Attenuation at 171.0 MHz 45 48 - dB Ultimate Rejection 50 54 - dB Ambient Temperature (Tref) - 25 - ˚C Source and Load Impedance 50 Ω Notes: 1. Average of the lower an d upper 3 dB band edge frequencies. 2. All dB values are referenced to the insertion loss. 3. Specifications are va lid for a temperature of 23C. 4. Typical change of filter fre quency response with temperature is ∆f = (T-Tref)*Tc*Fc, in ppm. MAXIMUM RATINGS Parameter Min Typ Max Units Storage Temperature Range -40 25 85 ˚C Operating Temperature Range -10 25 65 ˚C Temperature Coefficient of Frequency (Tc) 4 - -23 - ppm/ ˚C Input Power Level - 10 13 dBm MATCHING CIRCUIT Typical component values: Notes: 1. Recommend use of 2% tolerance matching components. 2. Component values are for reference only and may change depending on board layout. Ls1 = 33 nH Ls2 = 18 nH Lp1 = 33 nH Lp2 = 22 nH Input 50 Ω Single-ended Output 50 Ω Single-ended

Part Number: SF0156BA02421S Spectrum Microwave www.SpectrumMicrowave.com DSSF0156BA02421S Rev A 11-Mar-2010 ECN 36650 Page 3 of 3 PACKAGE OUTLINE SUGGESTED FOOTPRINT ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating Units: mm Tolerances are ±0.15 mm except where indicated and for the overall length and width, which are nominal values. Pad Configuration: Input: 11 Output: 5 Ground: All other pads