SF0154BA03191S APITECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

153.6 MHz SAW Filter

20 MHz Bandwidth

Part Number SF0154BA03191S Spectrum Microwave

400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401

www.SpectrumMicrowave.com DSSF0154BA03191S Rev B 11-Mar-2010 ECN 36650 Page 1 of 3

DESCRIPTION

  • 153.6 MHz SAW bandpass filter with 20 MHz bandwidth.
  • 7 x 5 mm ceramic LCC package.
  • RoHS compliant. TYPICAL PERFORMANCE S11 (78.6-228.6 MHz) S22 (78.6-228.6 MHz) Amp 10 dB/div Amp 1 dB/div Phase 5 deg/div Delay 100 ns/div Center = 153.6 MHz, 15 MHz/div (187.5 kHz incr)

Part Number SF0154BA03191S Spectrum Microwave www.SpectrumMicrowave.com DSSF0154BA03191S Rev B 11-Mar-2010 ECN 36650 Page 2 of 3 SPECIFICATION Parameter Min Typ Max Units Center Frequency, FC 1 - 153.6 - MHz Minimum Insertion Loss - 8.8 12 dB Passband Ripple (143.6 to 163.6 MHz) - 0.4 1 dB p-p Group Delay Deviation (143.6 to 153.6 MHz) - 30 60 ns p-p Phase Ripple (143.6 to 153.6 MHz) - 3.5 5 deg p-p Absolute Delay - 560 - ns 1 dB bandwidth 2 20 23.4 - MHz Relative Attenuation (10 to 105 MHz) 2 50 52 - dB Relative Attenuation (200 to 230 MHz) 2 52 55 - dB Relative Attenuation (230 to 1000 MHz) 2 40 60 - dB Input Return Loss at Fc 10 15 - dB Output Return Loss at Fc 10 18 - dB Source and Load Impedance 50 ohms Temperature Coefficient of Frequency -86 ppm/ ˚C Ambient Temperature - 25 - ˚C Notes: 1. Reference frequency. Comput ed as mean of the 3 dB frequencies. 2. All dB values are referenced to the insertion loss value. MAXIMUM RATINGS Parameter Min Max Units Storage Temperature Range -40 85 ˚C Operating Temperature Range -40 85 ˚C Input Power Level - 10 dBm MATCHING CIRCUIT Ls1 = 138 nH Ls2 = 207 nH Cp1 = 22 pF Cp2 = 15 pF Notes:

  • Recommend 2% or better tolerance matching components. Typical inductor Q=40.
  • Optimum values may change depending on board layout. Values shown are intended as a guide only. Input 50 Ω Single ended Output 50 Ω Single ended 10 5 All other pads GND GND

Part Number SF0154BA03191S Spectrum Microwave www.SpectrumMicrowave.com DSSF0154BA03191S Rev B 11-Mar-2010 ECN 36650 Page 3 of 3 P A C K A G E O U T L I N E SUGGESTED FOORPRINT All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. ISO 9001 Registered Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating Units: mm Tolerances are typically ±0.15 mm except where indicated. Pad Configuration: Input: 10 Output: 5 Ground: All other pads ∆ SMI BA03191S YYDDD Date Code (YY=year, DDD=day) Pad 1 indicator mark (ESD) 2.54