SF0150BA03095S APITECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

150 MHz SAW Filter

5.7 MHz Bandwidth

Part Number SF0150BA03095S Spectrum Microwave

400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401

www.SpectrumMicrowave.com DSSF0150BA03095S Rev A 11-Mar-2010 ECN 36650 Page 1 of 4

DESCRIPTION

  • 150 MHz SAW bandpass filter with 5.7 MHz bandwidth.
  • 13.3 x 6.5 mm SMP.
  • RoHS compliant. TYPICAL PERFORMANCE Horizontal: Frequency : 2.5 MHz/div Vertical from Top: Relative Magnitude : 10 dB/div Relative magnitude : 1 dB/div Group Delay Deviation : 150 ns/div S11 S22

Part Number SF0150BA03095S Spectrum Microwave www.SpectrumMicrowave.com DSSF0150BA03095S Rev A 11-Mar-2010 ECN 36650 Page 2 of 4 SPECIFICATION Parameter 1 Min Typ Max Units Center Frequency (FC) 2 149.875 150.025 150.175 MHz Insertion Loss 4 - 19.3 21 dB 1 dB Bandwidth 3 5.7 5.95 - MHz 3 dB Bandwidth 3 6.1 6.42 - dB 40 dB Bandwidth 3 - 7.95 8.3 dB Stopband Rejection (25 to 135 MHz) 45 54 - dB Stopband Rejection (165 to 2000 MHz) 45 53 - dB Passband Amplitude Variation (Fc+/-2.75 MHz) - 0.67 0.8 dB p-p Passband Group Delay Variation (Fc+/-2.75 MHz) 5 - 115 150 ns p-p Absolute Delay - 1.81 2.0 us Input and Output Return Loss(Fc+/-2.75 MHz) 5 - 1.3 1.8 :1 Source and Load Impedance - 50 - Ω Ambient Temperature - 25 - °C Notes: 1. All electrical specificat ions apply over the full operating temperature range and include allowance for all manufacturing tolerance. 2. Defined as the mean of the 10 dB frequencies. 3. dB levels are taken to be relative to the insertion loss. 4. Measured at the maximum level (l owest insertion loss) of the response. 5. When matched as indicated below. MAXIMUM RATINGS Parameter Min Max Units Storage Temperature Range -45 85 ˚C Operating Temperature Range -10 50 ˚C Input Power Level - 20 dBm D.C. Voltage between Each Terminal - 15 V ESD Level Human Body Model: 1000 V Machine Model: 200 V MATCHING CIRCUIT Typical component values: (Minimum inductor Q = 40) Notes: 1. Required component tolerances: resistors +/-5%, inductors +/-2%, capacitors +/-5% 2. Component values shown are for guidance only and may change depending on board layout. Ls1 = 39 nH Ls2 = 33 nH Cp1 = 47 pF Cp2 = 50 pF Rp1 = 220 Ω Rp2 = 130 Ω 10 5 All other pads Input 50 Ω Single-ended Output 50 Ω Single-ended

Part Number SF0150BA03095S Spectrum Microwave www.SpectrumMicrowave.com DSSF0150BA03095S Rev A 11-Mar-2010 ECN 36650 Page 3 of 4 PACKAGE OUTLINE SUGGESTED FOOTPRINT Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating Units: mm Tolerances are ±0.15 mm except for the overall length and width, which are nominal values. Pad Configuration: Input: 10 Output: 5 Ground: 1,2,3,4,6,7,8,9 13.30 6.50 +.20 -.10 +.20 -.10

Part Number SF0150BA03095S Spectrum Microwave www.SpectrumMicrowave.com DSSF0150BA03095S Rev A 11-Mar-2010 ECN 36650 Page 4 of 4 PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS Parameter Qualification Conditions Life Testing High temperature bake at +85 ºC for 168 hours. Temperature Cycling MIL-STD 883, Method 1010: -40 ºC to +85 ºC, 10 cycles, 10 minutes dwell at temperature extremes Vibration MIL-STD-202, Method 201A: 10 to 55 Hz, double amplitude of 0.06” for 2 hours in each axis. Mechanical Shock MIL-STD-883, Method 2002, Test Condition B: 1500 g, 3 impacts each axis Solder Heat Resistance and Reflow Condition Peak temperature 240+/-5 ºC for 10 seconds. Pre-heat: 150-170 ºC for 60 to 90 seconds. Peak dwell: over 200 ºC for 23 to 26 seconds. Handling: Class 1 per MIL-STD-1686 Reflow Profile is shown at the bottom of this table. Lead Integrity MIL-STD 883 Method 2004, Condition D 8 oz for 30 seconds. Solderability MIL-STD-883 Method 2003: 245 ºC +/-5 ºC; 95% coverage; no steam aging Hermeticity MIL-STD 883 Method 1014: Condition A2 and Condition C (no bomb) ESD Classification Class I per MIL-STD-883 Method 3015; Ensure ESD shielding bag is used during transportation processes; Personal grounding must be worn at all times when handling the device. Precautions Do not subject devices to ultrasonic cleaning, which may cause deterioration and destruction of the device. All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. ISO 9001 Registered Reflow Profile 100 150 200 250 0 50 100 150 200 250 300 TIME (sec) TEMP (deg C)