SF0115BA03088S APITECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

115 MHz SAW Filter

6 MHz Bandwidth

Part Number: SF0115BA03088S Spectrum Microwave

400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401

www.SpectrumMicrowave.com DSSF0115BA03088S Rev A 22-Feb-2010 ECN 36650 Page 1 of 4

DESCRIPTION

  • 115 MHz SAW bandpass filter with 6 MHz bandwidth for CDMA2000 applications.
  • 19 x 6.5 mm SMP.
  • RoHS compliant. TYPICAL PERFORMANCE Horizontal: Frequency : 3 MHz/div Vertical from top: Relative Magnitude : 10 dB/div Relative magnitude : 1 dB/div Group Delay : 150 ns/div S11 (112.2 to 117.8 MHz) S22 (112.2 to 117.8 MHz) Circle: 1.8:1 VSWR limit Circle: 1.8:1 VSWR limit

Part Number: SF0115BA03088S Spectrum Microwave www.SpectrumMicrowave.com DSSF0115BA03088S Rev A 22-Feb-2010 ECN 36650 Page 2 of 4 SPECIFICATION Parameter Min Typ Max Units All electrical specifications apply over the full -10ºC to +50ºC operating range and include allowance for all manufacturing tolerances Center Frequency FC 1 114.88 115 115.12 MHz 1 dB Bandwidth 2 5.6 6.08 MHz 3 dB Bandwidth 2 6.0 6.44 MHz 40 dB Bandwidth 2 7.75 8.2 MHz Stopband Rejection, 25 MHz to 100 MHz 45 58 dB Stopband Rejection, 130 MHz to 1000 MHz 45 53 dB Minimum Insertion Loss 18.9 20 dB Passband Amplitude Variation, FC ± 2.8 MHz 3 0.6 0.8 dB p-p Passband Group Delay Variation, FC ± 2.8 MHz 100 150 ns p-p Absolute Delay 2.0 2.1 µs Input VSWR, FC ± 2.8 MHz 4 1.55 1.8 : 1 Output VSWR, FC ± 2.8 MHz 4 1.3 1.8 : 1 Maximum Input Level 20 dBm Source and Load Impedance 50 Ω Notes: 1. Defined as the mean of the 10dB frequencies. 2. dB levels are taken to be relative to the insertion loss. 3. Excludes final roll-offs to the 1dB points. Note that ‘Passband Amplitude Variation’ includes Ripple (fast variations) and Slope (slow variations). 4. When matched using circuit below. MAXIMUM RATINGS Parameter Min Max Units Storage Temperature Range -45 85 ˚C Operating Temperature Range -10 50 ˚C Operating Input Power Level - +20 dBm D.C. Voltage between each pad - 15 V DC MATCHING CIRCUIT Typical component values: Notes: 1. Recommended tolerances: +/-2% inductors, minimum Q=40, +/-5% resistors and capacitors. 2. Component values are for reference only and may change depending on board layout. Rp1 = 430 Ω Rp2 = 200 Ω Ls1 = 68 nH Ls2 = 68 nH Cp1 = 56 pF Cp2 = 56 pF Input 50 Ω Single-ended Output 50 Ω Single-ended 10 5 1,2,3,4,6,7,8,9

Part Number: SF0115BA03088S Spectrum Microwave www.SpectrumMicrowave.com DSSF0115BA03088S Rev A 22-Feb-2010 ECN 36650 Page 3 of 4 PACKAGE OUTLINE SUGGESTED FOOTPRINT Units: mm Tolerances are ±0.15 mm except for the overall length, width and pad dimensions, which are nominal values. Pad Configuration: Input: 10 Output: 5 Ground: all other pads Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating

Part Number: SF0115BA03088S Spectrum Microwave www.SpectrumMicrowave.com DSSF0115BA03088S Rev A 22-Feb-2010 ECN 36650 Page 4 of 4 PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS Parameter Qualification Conditions Life Testing High temperature bake at +85 ºC for 168 hours. Temperature Cycling MIL-STD 883, Method 1010: -40 ºC to +85 ºC, 10 cycles, 10 minutes dwell at temperature extremes Vibration MIL-STD-202, Method 201A: 10 to 55 Hz, double amplitude of 0.06” for 2 hours in each axis. Mechanical Shock MIL-STD-883, Method 2002, Test Condition B: 1500 g, 3 impacts each axis Solder Heat Resistance and Reflow Condition Peak temperature 240+/-5 ºC for 10 seconds. Pre-heat: 150-170 ºC for 60 to 90 seconds. Peak dwell: over 200 ºC for 23 to 26 seconds. Handling: Class 1 per MIL-STD-1686 Reflow Profile is shown at the bottom of this table. Lead Integrity MIL-STD 883 Method 2004, Condition D 8 oz for 30 seconds. Solderability MIL-STD-883 Method 2003: 245 ºC +/-5 ºC; 95% coverage; no steam aging Hermeticity MIL-STD 883 Method 1014: Condition A2 and Condition C (no bomb) ESD Classification Class I per MIL-STD-883 Method 3015 Precautions Do not subject devices to ultrasonic cleaning, which may cause deterioration and destruction of the device. Reflow Profile 100 150 200 250 0 50 100 150 200 250 300 TIME (sec) TEMP (deg C) All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. ISO 9001 Registered