SF0063BA03106S APITECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

63 MHz SAW Filter

0.55 MHz Bandwidth

Part Number: SF0063BA03106S Spectrum Microwave

400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401

www.SpectrumMicrowave.com DSSF0063BA03106S Rev A 9-Feb-2010 ECN 36650 Page 1 of 3

DESCRIPTION

  • 63 MHz SAW bandpass filter with 0.55 MHz bandwidth in 19 x 6.55 mm SMP.
  • RoHS compliant. TYPICAL PERFORMANCE Vertical from top: Relative Magnitude : 10 dB/div Relative magnitude : 1 dB/div Group Delay Deviation : 500 ns/div S11 (61-65 MHz) S22 (61-65 MHz) 61 63 65

Part Number: SF0063BA03106S Spectrum Microwave www.SpectrumMicrowave.com DSSF0063BA03106S Rev A 9-Feb-2010 ECN 36650 Page 2 of 3 SPECIFICATION Parameter Min Typ Max Units Center Frequency, FC 1 62.95 63 63.05 MHz Insertion Loss at 63 MHz - 8.35 9 dB 1 dB Bandwidth 2 0.35 0.41 - MHz 3 dB Bandwidth 2 0.55 0.58 - MHz 35 dB Bandwidth 2 - 1.35 1.4 MHz Relative Attenuation (61 to 62.25 MHz) 35 42 - dB Relative Attenuation (63.75 to 65 MHz) 35 38 - dB Relative Attenuation (10 to 61 MHz) 43 55 - dB Relative Attenuation (65 to 140 MHz) 43 49 - dB Passband Ripple - 0.2 1.0 dB p-p Group Delay Ripple (Fc +/- 0.2 MHz) - 300 520 ns p-p Absolute Delay - 1.95 - us Source/Load Impedance 50 ohms Notes: 1. Defined as the average of the lower and upper 3 dB frequencies. 2. All dB levels are defined relati ve to the insertion loss at 63 MHz. MAXIMUM RATINGS Parameter Min Max Units Storage Temperature Range -40 85 ˚C Operating Temperature Range -40 8 ˚C Input Power Level 10 dBm MATCHING CIRCUIT Typical component values: (Minimum inductor Q = 40) Notes: 1. Recommend use of 2% tolerance matching components. 2. Component values are for reference only and may change depending on board layout. Ls1 = 540 nH Ls2 = 616 nH Cp1 = 100 pF Cp2 = 82 pF 10 5 All others Input 50 Ω Single-ended Output 50 Ω Single-ended GND GND

Part Number: SF0063BA03106S Spectrum Microwave www.SpectrumMicrowave.com DSSF0063BA03106S Rev A 9-Feb-2010 ECN 36650 Page 3 of 3 PACKAGE OUTLINE SUGGESTED FOOTPRINT Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. Units: mm Tolerances are ±0.15 mm except for the overall length, width and pad dimensions, which are nominal values. Pad Configuration: Input: 10 Input return: 1 Output: 5 Output return: 6 Ground: 2,3,4,7,8,9