SF00480BA02643S SPECTRUM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

480 MHz SAW Filter

12 MHz Bandwidth

Part Number SF00480BA02643S IDT •• •• SAW Products •• •• 324 Clark Street, Worcester, MA 01606, USA •• •• Ph 1-508-852-5400 •• •• Fax 1-508-852-8456 www.idt.com DSSF00480A02643S Rev X2 24-Aug-2009 Page 1 of 3

DESCRIPTION

  • 480 MHz SAW bandpass filter with 12 MHz bandwidth.
  • 7.0 X 5.0 mm ceramic LCC package.
  • RoHS compliant. TYPICAL PERFORMANCE Horizontal: 100MHz/Div Vertical: 10dB/Div 10.00 -10.00 0.000 -20.00 -30.00 -40.00 -50.00 -60.00 -70.00 -80.00 -90.00 Horizontal: 10 MHz/Div Center Freq. 480 MHz - 23.00 -22.00 -21.00 -20.00 -19.00 -18.00 -17.00 -16.00 -15.00 -14.00 -13.00 .05 .10 .15 .20 .25 .30 .35 .40 .45 .50 Horizontal: 0.3MHz/Div S21 Response Pass band Response: (Span 20 MHz) dB dB usec

Part Number SF00480BA02643S IDT •• •• SAW Products •• •• 324 Clark Street, Worcester, MA 01606, USA •• •• Ph 1-508-852-5400 •• •• Fax 1-508-852-8456 www.idt.com DSSF00480A02643S Rev X2 24-Aug-2009 Page 2 of 3 SPECIFICATION Parameter Min Typ Max Units Center Frequency, F C 1 - 480 - MHz Insertion Loss 2 - 15.3 22 dB 3dB Bandwidth 9 12.1 - MHz 35dB Bandwidth - 20.0 22 MHz Passband Ripple 476.4 – 483.6 MHz - 0.30 1 dB Group Delay Variation 475.5 – 484.5 MHz - 14 50 nse c Temp Coefficient - -23 ppm/˚C Notes: 1. Reference frequency. Computed as mean of the 3 dB frequencies. 2. All dB values are referenced to the insertion loss value. MAXIMUM RATINGS Parameter Min Max Units Storage Temperature Range -40 85 ˚C Operating Temperature Range -10 60 ˚C Input Power Level - 10 dBm MATCHING CIRCUIT 5,6,7,9,10 2 8 1,3,4,11,12 50 ohm 50 ohm

Part Number SF00480BA02643S IDT •• •• SAW Products •• •• 324 Clark Street, Worcester, MA 01606, USA •• •• Ph 1-508-852-5400 •• •• Fax 1-508-852-8456 www.idt.com DSSF00480A02643S Rev X2 24-Aug-2009 Page 3 of 3 PACKAGE OUTLINE SUGGESTED FOOTPRINT All specifications are believed to be accurate and reliable. However, MNC reserves the right to make changes without notice. © 200 8 All rights reserved. Package Material: Body: Al 2O 3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating Units: mm Tolerances are typically ±0.15 mm except where indicated. Pad Configuration: Balanced Input + : 8 Balanced Input - : 7 Balanced Output + : 2 Balanced Output - : 1 Ground: All other pads IDT 2643S YYDDD Date code (YY=year, DDD=day) Long Pad Location ISO 9001 Registered