SF0036BA11932S APITECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

36.15 MHz SAW Filter

8 MHz Bandwidth

Part Number: SF0036BA11932S Spectrum Microwave

400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401

www.SpectrumMicrowave.com DSSF0036BA11932S Rev A 4-Feb-2010 ECN 36650 Page 1 of 3

DESCRIPTION

  • 36.15 MHz SAW bandpass filter with 8 MHz bandwidth for Broadband Access.
  • 24.6 x 9 mm SMP.
  • RoHS compliant. TYPICAL PERFORMANCE Horizontal: Frequency : 2.5 MHz/div Vertical from top: Relative Magnitude : 10 dB/div Relative magnitude : 1 dB/div Phase Linearity : 10 deg/div Group Delay Deviation : 100 ns/div S11 (32.15 to 40.15 MHz) S22 (32.15 to 40.15 MHz)

Part Number: SF0036BA11932S Spectrum Microwave www.SpectrumMicrowave.com DSSF0036BA11932S Rev A 4-Feb-2010 ECN 36650 Page 2 of 3 SPECIFICATION Parameter Min Typ Max Units Center Frequency ( Fc) 1 36.1 36.15 36.2 MHz Insertion Loss 2 - 22 23 dB 1 dB Bandwidth 7.60 7.75 - MHz 3 dB Bandwidth 8.00 8.20 - MHz 38 dB Bandwidth - 10.00 10.50 MHz Passband Amplitude Ripple 3 - 0.5 0.7 dB p-p Passband Phase Ripple 3 - 2.2 3 deg p-p Passband Group Delay Ripple 3 - 30 60 ns p-p Rejection (10 to 30.9 MHz) 35 40 - dB Rejection (41.5 to 55 MHz) 33 40 - dB Absolute Delay - 1.50 - µs Ambient Temperature - 25 - º C Source / Load Impedance - 50 - Ω Substrate Material 128 Lithium Niobate Notes: 1. Defined as the average of the lower and upper 3 dB frequencies. 2. Value at 36.15 MHz. 3. Measured over Fc +/- 3.8 MHz. 4. Specifications ar e guaranteed over the operating temperature range. MAXIMUM RATINGS Parameter Min Max Units Storage Temperature Range -40 85 ˚C Operating Temperature Range 20 30 ˚C Input Power Level 10 dBm MATCHING CIRCUIT Typical component values: (Minimum inductor Q = 40) Notes: 1. Recommend use of 5% tolerance matching components. 2. Component values may change depending on board layout. Ls1 = 470 nH Ls2 = 560 nH 10 5 1 6 Input 50 Ω Single-ended Output 50 Ω Single-ended GND GND

Part Number: SF0036BA11932S Spectrum Microwave www.SpectrumMicrowave.com DSSF0036BA11932S Rev A 4-Feb-2010 ECN 36650 Page 3 of 3 PACKAGE OUTLINE SUGGESTED FOOTPRINT Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. Units: mm Tolerances are ±0.15 mm except for the overall length, width and pad dimensions, which are nominal values. Pad Configuration: Input: 10 Input return: 1 Output: 5 Output return: 6 Ground: 2,3,4,7,8,9