SF0036BA11033T APITECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

36 MHz SAW Filter

5.75 MHz Bandwidth

Part Number: SF0036BA11033T Spectrum Microwave

324 Clark Street, Worcester, MA 01606, USA • Phone 1-508-852-5400 • Fax 1-508-852-8456

www.SpectrumMicrowave.com DSSF0036BA11033T Rev A 3-Feb-2010 ECN 36650 Page 1 of 3

DESCRIPTION

  • 36 MHz SAW bandpass filter for VSB system B/G – IF applications.
  • 35.1 x 20.6 mm DIP package.
  • RoHS compliant. TYPICAL PERFORMANCE Horizontal: Frequency : 1 MHz/div Vertical from Top: Relative Magnitude : 10 dB/div Relative magnitude : 1 dB/div Group Delay Deviation : 50 ns/div

Part Number: SF0036BA11033T Spectrum Microwave www.SpectrumMicrowave.com DSSF0036BA11033T Rev A 3-Feb-2010 ECN 36650 Page 2 of 3 SPECIFICATION Parameter Min Typ Max Units F_visual - 38.9 - MHz F_color - 34.5 - MHz F_audio - 33.4 - MHz Center Frequency (Fc, nominal) 1 - 36 - MHz Insertion Loss - 27.5 29 dB 1 dB Lower Band Edge - 33.75 33.9 MHz 1 dB Upper Band Edge 39.65 39.75 - MHz Passband Ripple (34.0 to 39.4 MHz) - 0.3 0.5 dB p-p Phase Deviation (33.9 to 39.65 MHz) - 3 5 deg p-p Group Delay Ripple (33.9 to 39.65 MHz) - 40 50 ns p-p Rejection (20 to 32 MHz) 50 55 - dB Rejection at 33.4 MHz 40 45 - dB Rejection at 40.15 MHz 40 45 - dB Rejection (40.4 to 55 MHz) 50 55 - dB 2T K Factor - 0.5 - % Pulse to Bar Ratio - 1.5 - % Absolute Delay - 4.5 - us Ambient Temperature (Tref) 37 40 43 º C Source/Load Impedance - 50 - Ω Substrate Material Pyro-free 128° Lithium Niobate Notes: 1. Average of lower & upper 3 dB frequencies. 2. Typical change of filter frequency response with temperature is ∆f = (T-Tref)*Tc*Fc, in ppm. MAXIMUM RATINGS Parameter Min Typ Max Units Storage Temperature Range -40 40 85 ˚C Temperature Coefficient of Frequency (Tc) 2 - -80 - ppm/˚C Input Power Level - 0 10 dBm MATCHING CIRCUIT Note: External matching components are not required. Input 50 Ω Single-ended Output 50 Ω Single-ended GND

Part Number: SF0036BA11033T Spectrum Microwave www.SpectrumMicrowave.com DSSF0036BA11033T Rev A 3-Feb-2010 ECN 36650 Page 3 of 3 PACKAGE OUTLINE ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. Units: mm Tolerances are ±0.15 mm except for the overall length and width, which are nominal values. Pin Configuration: Input: 3 Input return: 22 Output: 15 Output return: 10 Ground: All other pins