DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • Low Capacitance (4 pF Max, I/O to GND)
  • Small Body Outline Dimensions: − 01005 Size: 0.435 x 0.230 mm
  • Protection for the Following IEC Standards: IEC 61000−4−2 (Level 4)
  • Low ESD Clamping V oltage
  • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Symbol Value Unit Operating Junction Temperature Range TJ −55 to +125 °C Storage Temperature Range Tstg −55 to +150 °C Lead Solder Temperature − Maximum (10 Seconds) TL 260 °C SESDU1052: IEC 61000−4−2 Contact IEC 61000−4−2 Air ESD ±20 ±20 kV kV Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. See Application Note AND8308/D for further description of survivability specs. MARKING DIAGRAM PIN CONFIGURATION AND SCHEMATIC DSN2 CASE 152BB See detailed ordering and shipping information on page 2 of this data sheet.

ORDERING INFORMATION

A A = Specific Device Code

www.onsemi.com ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Parameter Symbol Conditions Min Typ Max Unit Reverse Working Voltage VRWM I/O Pin to GND 5.5 V Breakdown Voltage VBR IT = 1 mA, I/O Pin to GND 5.9 6.8 8.5 V Reverse Leakage Current IR VRWM = 5.5 V, I/O Pin to GND 0.1 /C0109A Clamping Voltage TLP (Note 1) I/O Pin to GND VC IPP = 8 A IPP = 16 A IPP = 30 A 8.3 9.5 11.3 V Clamping Voltage TLP (Note 1) GND to I/O Pin VC IPP = 8 A IPP = 16 A IPP = 30 A 1.8 2.4 3.7 V Dynamic Resistance RDYN I/O Pin to GND, 100 ns TLP 0.15 /C0087 Holding Voltage VH I/O Pin to GND, 100 ns TLP 6.0 7.5 9.0 V Trigger Voltage VT I/O Pin to GND, 100 ns TLP 8.0 10 V Reverse Peak Pulse Current IPP IEC61000−4−5 (8x20 /C0109s), I/O Pin to GND 3.0 11 A Clamping Voltage (8x20 /C0109s) VC IPP = 3 A, I/O Pin to GND 8.0 10 V Junction Capacitance CJ VR = 0 V, f = 1 MHz 2.0 4.0 pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. ANSI/ESD STM5.5.1 − Electrostatic Discharge Sensitivity Testing using Transmission Line Pulse (TLP) Model. TLP conditions: Z 0 = 50 /C0087, tp = 100 ns, tr = 1 ns, averaging window; t1 = 70 ns to t2 = 90 ns. Device Package Shipping† SESDU1052FCT5G DSN2 − 01005 (Pb−Free) 10,000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.

Figure 11. IEC61000−4−2 Spec voltage over a range of current levels. Figure 12. Simplified Schematic of a Typical TLP

10 M/C0087

Figure 13. Comparison Between 8 kV IEC 61000−4−2 and 8 A and 16 A TLP Waveforms

www.onsemi.com PACKAGE DIMENSIONS DSN2, 0.435x0.23, 0.28P CASE 152BB ISSUE A onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative