SEMIX151GAL12VS SEMIKRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

• Homogeneous Si •V CE(sat) with positive temperature coefficient • High short circuit capability • UL recognised file no. E63532 Typical Applications* •A C i n v e r t e r d r i v e s •U P S • Electronic Welding Remarks • Case temperature limited to T C=125°C max. • Product reliability results are valid for Tj=150°C Absolute Maximum Ratings Symbol Conditions Values Unit IGBT VCES Tj =2 5° C 1200 V IC Tj = 175 °C Tc =2 5° C 231 A Tc =8 0° C 176 A ICnom 150 A ICRM ICRM = 3xICnom 450 A VGES -20 ... 20 V tpsc VCC = 720 V VGE ≤ 15 V VCES ≤ 1200 V Tj =1 2 5° C 10 µs Tj -40 ... 175 °C Inverse diode IF Tj = 175 °C Tc =2 5° C 189 A Tc =8 0° C 141 A IFnom 150 A IFRM IFRM = 3xIFnom 450 A IFSM tp = 10 ms, sin 180°, Tj =2 5° C 900 A Tj -40 ... 175 °C Freewheeling diode IF Tj = 175 °C Tc =2 5° C 189 A Tc =8 0° C 141 A IFnom 150 A IFRM IFRM = 3xIFnom 450 A IFSM tp = 10 ms, sin 180°, Tj =2 5° C 900 A Tj -40 ... 175 °C Module It(RMS) Tterminal =8 0° C 600 A Tstg -40 ... 125 °C Visol AC sinus 50Hz, t = 1 min 4000 V Characteristics Symbol Conditions min. typ. max. Unit IGBT VCE(sat) IC =1 5 0A VGE =1 5V chiplevel Tj =2 5° C 1.75 2.20 V Tj =1 5 0° C 2.2 2.5 V VCE0 chiplevel Tj =2 5° C 0.94 1.04 V Tj =1 5 0° C 0.88 0.98 V rCE VGE =1 5V chiplevel Tj =2 5° C 5.4 7.7 m  Tj =1 5 0° C 8.8 10.1 m  VGE(th) VGE=VCE, IC = 6 mA 5.5 6 6.5 V ICES VGE =0V VCE = 1200 V Tj =2 5° C 0.1 0.3 mA Tj =1 5 0° C mA Cies VCE =2 5V VGE =0V f=1M H z 9.0 nF Coes f=1M H z 0.89 nF Cres f=1M H z 0.88 nF QG VGE = - 8 V...+ 15 V 1650 nC RGint Tj =2 5° C 5.00 

2 Rev. 2 – 13.12.2012 © by SEMIKRON td(on) VCC = 600 V IC =1 5 0A VGE =± 1 5V RG on =1  RG off =1  di/dton = 4600 A/µs di/dtoff =1 7 0 0A / µ s du/dtoff = 6700 V/ µs Tj =1 5 0° C 319 ns tr Tj =1 5 0° C 46 ns Eon Tj =1 5 0° C 19.4 mJ td(off) Tj =1 5 0° C 482 ns tf Tj =1 5 0° C 68 ns Eoff Tj =1 5 0° C 17.1 mJ Rth(j-c) per IGBT 0.19 K/W Inverse diode VF = VEC IF = 150 A VGE =0V chiplevel Tj =2 5° C 2.1 2.46 V Tj =1 5 0° C 2.1 2.4 V VF0 chiplevel Tj =2 5° C 1.1 1.3 1.5 V Tj =1 5 0° C 0.7 0.9 1.1 V rF chiplevel Tj =2 5° C 4.3 5.6 6.4 m  Tj =1 5 0° C 7.0 7.8 8.5 m  IRRM IF = 150 A di/dtoff =4 4 0 0A / µ s VGE =- 1 5V VCC = 600 V Tj =1 5 0° C 175 A Qrr Tj =1 5 0° C 27.5 µC Err Tj =1 5 0° C 11.5 mJ Rth(j-c) per diode 0.31 K/W Freewheeling diode VF = VEC IF = 150 A VGE =0V chiplevel Tj =2 5° C 2.1 2.46 V Tj =1 5 0° C 2.1 2.4 V VF0 chiplevel Tj =2 5° C 1.1 1.3 1.5 V Tj =1 5 0° C 0.7 0.9 1.1 V rF chiplevel Tj =2 5° C 4.3 5.6 6.4 m  Tj =1 5 0° C 7.0 7.8 8.5 m  IRRM IF = 150 A di/dtoff =4 4 0 0A / µ s VGE =- 1 5V VCC = 600 V Tj =1 5 0° C 175 A Qrr Tj =1 5 0° C 27.5 µC Err Tj =1 5 0° C 11.5 mJ Rth(j-c) per diode 0.31 K/W Module LCE 16 nH RCC'+EE' res., terminal-chip TC =2 5° C 0.7 m  TC =1 2 5° C 1m  Rth(c-s) per module 0.075 K/W Ms to heat sink (M5) 3 5 Nm Mt to terminals (M6) 2.5 5 Nm Nm w1 45 g Temperatur Sensor ±2% K Characteristics Symbol Conditions min. typ. max. Unit SEMiX® 1s GAL SEMiX151GAL12Vs • Homogeneous Si •V CE(sat) with positive temperature coefficient • High short circuit capability • UL recognised file no. E63532 Typical Applications* •A C i n v e r t e r d r i v e s •U P S • Electronic Welding Remarks • Case temperature limited to T C=125°C max. • Product reliability results are valid for Tj=150°C

© by SEMIKRON Rev. 2 – 13.12.2012 3 Fig. 1: Typ. output characteristic, inclusive RCC'+ EE' Fig. 2: Rated current vs. temperature IC = f (TC) Fig. 3: Typ. turn-on /-off energy = f (IC) Fig. 4: Typ. turn-on /-off energy = f (RG) Fig. 5: Typ. transfer characteristic Fig. 6: Typ. gate charge characteristic

4 Rev. 2 – 13.12.2012 © by SEMIKRON Fig. 11: Typ. CAL diode peak reverse recovery current Fig. 12: Typ. CAL diode recovery charge

© by SEMIKRON Rev. 2 – 13.12.2012 5 This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staf f. SEMiX 1s spring configuration