SEL6010_08 SANKEN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

■3φ Round LEDs SEL6010 Series (available as Direct Mount) SEL6110R Deep red Diffused red 2.0 2.5 10 2.6 10 700 10 625 10 100 10 GaP SEL6110S Deep red Transparent red 2.0 2.5 10 3.9 10 700 10 625 10 100 10 GaP SEL6210R Red Diffused red 1.9 2.5 10 18 20 630 10 620 10 35 10 GaAsP SEL6210S Red Transparent red 1.9 2.5 10 41 20 630 10 620 10 35 10 GaAsP SEL6810A Amber Transparent orange 1.9 2.5 10 22 10 610 10 605 10 35 10 GaAsP SEL6810D Amber Diffused orange 1.9 2.5 10 9.6 10 610 10 605 10 35 10 GaAsP SEL6910A Orange Transparent orange 1.9 2.5 10 22 10 587 10 590 10 33 10 GaAsP SEL6910D Orange Diffused orange 1.9 2.5 10 11 10 587 10 590 10 33 10 GaAsP SEL6710K Y ellow Transparent yellow 2.0 2.5 10 37 10 570 10 571 10 30 10 GaP SEL6710Y Y ellow Diffused yellow 2.0 2.5 10 11 10 570 10 571 10 30 10 GaP SEL6410E Green Transparent green 2.0 2.5 10 90 20 560 10 567 10 20 10 GaP SEL6410G Green Diffused green 2.0 2.5 10 30 20 560 10 567 10 20 10 GaP SEL6510C Pure green Water clear 2.0 2.5 10 42 20 555 10 559 10 20 10 GaP SEL6510G Pure green Diffused green 2.0 2.5 10 9.6 20 555 10 559 10 20 10 GaP SEL6E10C Blue Water clear 4.0 4.8 20 60 20 430 20 466 20 65 20 GaN SELK6E10C-D High luminosity Blue Water clear 3.6 4.0 20 100 20 468 20 470 20 30 20 GaN on Si SELK6E10C-2 ɹɹɹɹɹɹɹ Blue Water clear 3.8 4.2 20 350 20 468 20 470 20 30 20 GaN on Si SELU6910C-S Ultrahigh luminosityɹOrange Water clear 2.0 2.5 20 550 20 591 20 590 20 15 20 AlGaInP Part Number Emitting Color Lens Color Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Chip Material VF (V) TYP TYP TYP TYP TYPMAX Conditions IF (mA) Iv (mcd) Conditions IF (mA) λP (nm) Conditions IF (mA) (nm) Conditions IF (mA) λd (nm) Conditions IF (mA) 90° 60° 30° 90° 60° 30° 050100% 50 100% 90° 60° 30° 90° 60° 30° 050100% 50 100% 3.5 0.8±0.2 4.0±0.2 0.4 ±0.1 23.0min 1.0min 5.5 ±0.5 (1.7) 3.5 ±0.1 (2.54) ø3.1±0.1 4.4 0.45±0.1 0.65max Resin heap0.8max Cathode Directional Characteristics (representative example) External Dimensions (Unit: mm) Product Mass: Approx. 0.13 g Dimensional Tolerance: ±0.3 Diffused lens Transparent lens 5-1-1 Unicolor lamps

218 LEDs

  • Visible Light Unicolor Lamp Parameter Unit −30 to +80 −0.45 −30 to +100 120 100 −30 to +85 ConditionsGaP GaAsP GaAlAs AlGaInP InGaN GaN Ratings mW mA mA/°C mA V PD IF ∆IF IFP VR Top Tstg 25°C or higher f=1kHz, tw≤100 sµ
  • Visible Light Bicolor Lamp GaP GaAsP GaAlAs AlGaInP InGaN 120 Ratings Conditions −0.45 100 −30 to +85 −30 to +100 Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 s µ
  • Visible Light Unicolor Surface Mount LEDs Parameter Unit 3 5 −30 to +100 −30 to +85 −0.45 100*1 −30 to +80 −0.27 70*2 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaP GaAsP GaAlAs AlGaInP InGaN GaN Ratings Conditions IF ∆IF IFP VR Top Tstg mA mA/°C mA V 25°C or higher f=1kHz, tw≤100 sµ
  • Visible Light Bicolor Surface Mount LEDs Parameter Unit ConditionsSEC2002/2004 (Same conditions for simultaneous lighting) −0.45 −30 to +85 −30 to +100 Ratings IF ∆IF IFP VR Top Tstg mA mA/°C mA V P D mW 25°C or higher f=1kHz, tw≤100 sµ
  • Visible Light Three Element Surface Mount LEDs Red Green/Blue −30 to +80 −30 to +100 Parameter Unit Conditions Ratings SECT3M02C-S 120 −0.45 PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 s µ 5-1 Visible Light LEDs