SEL1053M_08 SANKEN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

224 LEDs

■4.6 × 5.6φ Egg-Shaped LEDs SEL1053M Series SEL1453CEMKT Green Transparent green 2.0 2.5 10 140 20 560 10 567 10 20 10 GaP SELU1253CMKT ɹɹɹɹɹɹRed Water clear 2.0 2.5 20 200 20 635 20 625 20 15 20 AlGaInP SELU1853CM-S ɹɹɹɹɹɹAmber Water clear 2.0 2.5 20 550 20 611 20 605 20 17 20 AlGaInP Ultrahigh luminosity Part Number Emitting Color Lens Color Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Chip Material VF (V) TYP TYP TYP TYP TYPMAX Conditions IF (mA) Iv (mcd) Conditions IF (mA) λP (nm) Conditions IF (mA) (nm) Conditions IF (mA) λd (nm) Conditions IF (mA) 5.6±0.2 Resin burr 0.3max 4.6±0.2 1.0min 23.5min Cathode Anode 7.7±0.5 (2.54) 0.65max 4.7±0.2 5.7±0.2 2-0.5±0.1 0.5±0.1 Resin heap 1.5maxAlGaInP –90° –60° –30° 90° 60° 30° 100% 100% –90° –60° –30° 90° 60° 30° 100% 100%050 50 0 50 50 –90° –60° –30° 90° 60° 30° 100% 100% –90° –60° –30° 90° 60° 30° 100% 100%050 50 0 50 50 GaP Directional Characteristics (representative example) External Dimensions (Unit: mm) Product Mass: Approx. 0.30 g Dimensional Tolerance: ±0.3 5-1-1 Unicolor lamps

218 LEDs

  • Visible Light Unicolor Lamp Parameter Unit −30 to +80 −0.45 −30 to +100 120 100 −30 to +85 ConditionsGaP GaAsP GaAlAs AlGaInP InGaN GaN Ratings mW mA mA/°C mA V PD IF ∆IF IFP VR Top Tstg 25°C or higher f=1kHz, tw≤100 sµ
  • Visible Light Bicolor Lamp GaP GaAsP GaAlAs AlGaInP InGaN 120 Ratings Conditions −0.45 100 −30 to +85 −30 to +100 Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 s µ
  • Visible Light Unicolor Surface Mount LEDs Parameter Unit 3 5 −30 to +100 −30 to +85 −0.45 100*1 −30 to +80 −0.27 70*2 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaP GaAsP GaAlAs AlGaInP InGaN GaN Ratings Conditions IF ∆IF IFP VR Top Tstg mA mA/°C mA V 25°C or higher f=1kHz, tw≤100 sµ
  • Visible Light Bicolor Surface Mount LEDs Parameter Unit ConditionsSEC2002/2004 (Same conditions for simultaneous lighting) −0.45 −30 to +85 −30 to +100 Ratings IF ∆IF IFP VR Top Tstg mA mA/°C mA V P D mW 25°C or higher f=1kHz, tw≤100 sµ
  • Visible Light Three Element Surface Mount LEDs Red Green/Blue −30 to +80 −30 to +100 Parameter Unit Conditions Ratings SECT3M02C-S 120 −0.45 PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 s µ 5-1 Visible Light LEDs