SEK330M200ST

SEK_18 CDE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type SEK 105 ºC Radial Leaded Aluminum Electrolytic Capacitors Long Life, Aluminum Electrolytic Type SEK is a radial leaded aluminum electrolytic ca - pacitor with a +105 º C, long life rating. The volumetic efficient high CV product of the SEK makes it ideal for high density packaging in general purpose, coupling, decoupling, bypass and filtering circuit applications. Highlights

• +105 ºC
• Long life
• High CV product
• General purpose applications
• Available in T&R and ammo pack Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Maximum DC Leakage Current: Dissipation Factor @ 120 Hz, +25 ºC: Ripple Multipliers for Voltage and Temperature: 0.47 to 15,000 µF 6.3 to 450 Vdc ±20% –55 ºC to +105 ºC; 6.3 to 100 Vdc –40 ºC to +105 ºC; 160 to 400 Vdc –25 ºC to +105 ºC; 450 Vdc After 2 minutes, with rated voltage at +20 ºC 6.3 to 100 Vdc I = .01CV or 3 µA Max (whichever is greater) ≥ 160 Vdc after 3 min, with rated voltage at +20 ºC I = .03CV or 10 µA Max (whichever is greater) C = Capacitance in (µF) V = Rated voltage I = Leakage current in µA WV (V) 6.3 10 16 25 35 50 63 80 100 160-250 350-450 DF(%) 26 22 18 16 14 12 10 10 10 15 20 Rated Ripple Multipliers WVDC 60Hz 120Hz 1kHz 10kHz 6 to 25 0.80 1.0 1.1 1.2 35 to 100 0.75 1.0 1.3 1.4 160 to 250 0.70 1.0 1.4 1.6 350 to 400 0.60 1.0 1.5 1.8 Ambient Ripple Temperature Multiplier +105 ºC 1.00 +85 ºC 1.50 +70 ºC 1.80 Apply WVDC for 2000 hours at +105 ºC Capacitance change within 20% of initial limit DF not to exceed 200% of initial requirement Leakage current not to exceed 200% of initial 1000 hrs with no voltage applied Cap change within ±20% of initial values DF not to exceed 200% of initial requirement DC leakage current meets initial requirement For capacitors whose capacitance value exceeds 1000 µF, the value of DF (%) is increased 2% for every additional 1000 µF. Load Life: Shelf Life: Complies with the EU Directive 2002/95/ EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBro- minated Biphenyls (PBB) and PolyBromi- nated Diphenyl Ethers (PBDE).

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type SEK 105 ºC Radial Leaded Aluminum Electrolytic Capacitors Outline Drawing Temperature Characteristics Load Life Characteristics Part Numbering System Capacitance Rated Lead Type Capacitance Tolerance Voltage Packaging Configuration (µF) (%) (Vdc) SEK 100 M 100 S T 3R0 = 3 K = ±10 6R3 = 6.3 A = Tape & Ammo 1 = Lead cut 100 = 10 M = ±20 010 = 10 E = Different Characteristic 2 = Lead form 101 = 100 100 = 100 R = Tape & Reel 4 = Lead crimp & cut (form) 102 = 1000 S = Standard T = Standard -40 0 40 80 %/L50876C Temperature /L50103C Capacitance Change Ratio -10 -20 1/L50528F 50V 100/L50528F 25V Temperature /L50103C Dissipation Factor Change -40 0 40 80 %/L50876DF 200 100 1/L50528F 50V 100/L50528F 25V 0 250 500 750 %/L50876C Time In Hours Capacitance Change Ratio -10 -20 470/L50528F 25V Time In Hours Leakage Current Change 0 250 500 750 %/L50876LC 100 1 100/L50528F 160V 470/L50528F 25V 1000 1000 0 250 500 750 %/L50876DF Time In Hours Dissipation Factor Change 100/L50528F 160V 470/L50528F 25V 1000 100/L50528F 160V Vinyl sleeve adds .5 Max. to diameter and 2.0 Max. to length Outline Dimensions (Millimeters) Case vented on diameters 6.3 and greater L S /L505120.5 15 Min. D5 PVC Sleeve d /L505120.05 PVC or PET (PET for all date codes after October 2017)

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type SEK 105 ºC Radial Leaded Aluminum Electrolytic Capacitors Max ESR Max Ripple Catalog 120 Hz 120 Hz Size in. (mm) Cap Part Number 25 ºC 105 ºC Diameter Length Lead Space Lead Dia. (µF) (Ω) (mA) (D) (L) (S) (d)

6.3 Vdc (8 Volts Surge)

10 Vdc (13 Volts Surge)

16 Vdc (20 Volts Surge)

25 Vdc (32 Volts Surge)

Type Capacitance Tolerance Voltage Packaging Configuration (µF) (%) (Vdc) SEK 100 M 100 S T 3R0 = 3 K = ±10 6R3 = 6.3 A = Tape & Ammo 1 = Lead cut 100 = 10 M = ±20 010 = 10 E = Different Characteristic 2 = Lead form 101 = 100 100 = 100 R = Tape & Reel 4 = Lead crimp & cut (form) 102 = 1000 S = Standard T = Standard Ratings

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type SEK 105 ºC Radial Leaded Aluminum Electrolytic Capacitors Max ESR Max Ripple Catalog 120 Hz 120 Hz Size in. (mm) Cap Part Number 25 ºC 105 ºC Diameter Length Lead Space Lead Dia. (µF) (Ω) (mA) (D) (L) (S) (d)

35 Vdc (44 Volts Surge)

50 Vdc (63 Volts Surge)

63 Vdc (79 Volts Surge)

Parts highlighted in yellow are obsolete.

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type SEK 105 ºC Radial Leaded Aluminum Electrolytic Capacitors Max ESR Max Ripple Catalog 120 Hz 120 Hz Size in. (mm) Cap Part Number 25 ºC 105 ºC Diameter Length Lead Space Lead Dia. (µF) (Ω) (mA) (D) (L) (S) (d) Catalog 120 Hz 120 Hz Size in. (mm) Cap Part Number 25 ºC 105 ºC Diameter Length Lead Space Lead Dia. (µF) (Ω) (mA) (D) (L) (S) (d)

100 Vdc (125 Volts Surge)

160 Vdc (200 Volts Surge)

200 Vdc (250 Volts Surge)

250 Vdc (300 Volts Surge)

Parts highlighted in yellow are obsolete.

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type SEK 105 ºC Radial Leaded Aluminum Electrolytic Capacitors Max ESR Max Ripple Catalog 120 Hz 120 Hz Size in. (mm) Cap Part Number 25 ºC 105 ºC Diameter Length Lead Space Lead Dia. (µF) (Ω) (mA) (D) (L) (S) (d)

350 Vdc (400 Volts Surge)

400 Vdc (450 Volts Surge)

450 Vdc (500 Volts Surge)

Parts highlighted in yellow are obsolete.

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type SEK 105 ºC Radial Leaded Aluminum Electrolytic Capacitors Max ESR Max Ripple Catalog 120 Hz 120 Hz Size in. (mm) Cap Part Number 25 ºC 105 ºC Diameter Length Lead Space Lead Dia. (µF) (Ω) (mA) (D) (L) (S) (d) Taping & Packaging h W0 W t P2 P F P0 d H h W0 W t P2 P F P0 d H D A D A h W0 W t P2 P d H A F D Fig. 2 - Straight Taping (5Φ, 6.3Φ, 8Φ)Fig. 1 - Formed Taping Fig. 4- Straight Taping (16Φ, 18Φ) t ihD0H0 HW0 WFP2P1P0 PdAD -0.2 Fig. Code Item 8 5, 6.3 5 ~ 8 4 ~ 6.3 12, 13 16, 18 26.0 26.0 21.0 12.5 12.5 12.5 7.0 0.45 0.6 0.6 0.5 0.5 0.5 30.00.8 15.0 15.0 12.7 12.7 12.7 12.7 12.712.7 12.7 15.0 12.7 12.7 12.7 3.75 5.0 3.85 4.6 5.1 3.85 3.85 7.5 7.5 6.35 6.35 6.35 6.35 6.35 7.5 5.0 5.0 3.5 2.5 5.0 5.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 12.5 12.5 12.5 12.5 12.5 12.5 12.5 18.0 18.5 18.5 18.5 18.5 18.5 18.5 16.0 16.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 0.7 0.7 0.7 0.7 0.7 0.7 0.7 2.0 2.0 2.0 2.0 2.0 2.0 2.0 Ammo Pack Ammo Pack boxes are shipped 5 to the outer packing carton A BC 4 44 1500 5 44 1200 6 44 1000 8 44 800 10 (12L) 44 600 10 (16L) 50 600 12, 13 - - 16 - - Tape And Reel Quantities Case Diameter Reel Reel Qty. D (mm) Width (Pcs.) 4 250 340 54 3000 5 250 340 54 2,000 6.3 290 340 54 2,000 8 250 340 54 1,000 1 0 (12 L) 290 340 54 600 10 (16 L) 350 340 59 600 10 (20 L) 340 340 71 600 12, 13 340 340 71 400 16 340 3 40 71 300 C±3A±5 B Max Quantity Per Ammo Pack Box Capacitor Diameter D (mm) Ammo Pack Box Dimensions (mm) Fig. 3- Straight Taping (Under 10Φ, 12Φ, 13Φ) h W0 W P2 P F P0 d H D A t Standard Lead Spacing of Taped Components is 5mm Other Lead Spacing is Available by Special Order

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type SEK 105 ºC Radial Leaded Aluminum Electrolytic Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information con- tained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guaran- tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa- tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi- cated in such warnings, cautions and notes, or that other safety measures may not be required.