SEF101A SECOS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Any changing of specification will not be informed individual SEF101A THRU SEF107A VOLTAGE 50V ~ 1000V 1.0AMP High Efficiency Recovery Rectifiers SEF101A SEF102A SEF103A SEF104A SEF105A SEF106A UNITS 50 100 200 400 600 800 V 50 100 200 400 600 800 V 35 70 140 280 420 560 1.0 5.0 100 -65 +175 V A A V µA µA nS pF 0.98 1.3 1.5 1.7 50 75 C SEF107A 1000 1000 700 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at Ta=55 C Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current Ta=25 C at Rated DC Blocking Voltage Ta=100 C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) NOTES: 1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C. MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Metallurgically bonded construction * Polarity: Color band denotes cathode end * Mounting position: Any * Weight: 0.063 grams

FEATURES

  • Ideal for surface mount applications * Easy pick and place * Built-in strain relief * Fast switching speed Operating and Storage Temperature Range TJ , TSTG http://www.SeCoSGmbH.com Elektronische Bauelemente 01-Jun-2006 Rev.D Page 1 of 2 A B D G E H F C Dimensions in Millimeters Dimensions in Inches A 1.25 1.65 0.049 0.065 B 3.99 4.60 0.157 0.181 C 2.50 2.90 0.098 0.114 D 1.98 2.44 0.078 0.096 E 0.051 0.203 0.002 0.008 F 4.78 5.28 0.188 0.208 G 0.76 1.52 0.030 0.060 H 0.152 0.305 0.006 0.012 S M A RoHS Compliant Product A suffix of "-C" specifies halogen-free

Any changing of specification will not be informed individual SEF101A THRU SEF107A VOLTAGE 50V ~ 1000V 1.0AMP High Efficiency Recovery Rectifiers 0.1 1.0 .01 CHARACTERISTICS FORWARD VOLTAGE,(V) Pulse Width 300us 1% Duty Cycle 0.2 0.4 0.6 0.8 1.0 1.2 (+) (+) 25Vdc (approx.) ( ) ( ) .01 .05 .1 .5 1 5 10 50 100 D.U.T. 3.0 AMBIENT TEMPERATURE ( C) Tj=25 C SEF106A~SEF107A SEF101A~SEF103A SE F104A SE F105A RATING AND CHARACTERISTIC CURVES (SEF101A THRU SEF107A) FIG.1-TYPICAL FORWARD FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT ,(A) FIG.5-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE,(V) JUNCTION CAP ACITANCE,(pF) INSTANTANEOUS FOR WARD CURRENT ,(A) PULSE GENERATOR (NOTE 2) OSCILLISCOPE (NOTE 1) NON- INDUCTIVE W NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. +0.5A -0.25A -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm trr FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS NONINDUCTIVE NONINDUCTIVE W W FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWAARD SURGE CURRENT,(A) NUMBER OF CYCLES AT 60Hz 1 10 5 50 100 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method Single Phase Half Wave 60Hz Resistive Or Inductive Load 0 20 40 60 80 100 120 140 160 180 200 http://www.SeCoSGmbH.com Elektronische Bauelemente 01-Jun-2006 Rev. D Page 2 of 2