SED120LB100 SSDI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Solid State Devices, Inc.

14701 Firestone Blvd * La Mirada, CA 90638-5223

Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer’s Data Sheet Part Number / Ordering Information 1/ └ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV S = S Level └ Voltage 100 = 100 V └ Package LB = Sedpack 3 LE = Sedpack 3 with Lead LT = Sedpack 3 with Lead and Heatsink SED120LB100, SED120LE100, and SED120LT100

120 A / 100 V

FEATURES:

  • 100 Volt Schottky Rectifier
  • Average Output Current 120 Amps
  • Low Reverse Leakage
  • Low Forward Voltage Drop
  • Hermetically Sealed Power Surface Mount Package
  • Guard Ring for Overvoltage Protection
  • Eutectic Die Attach
  • 175°C Operating Temperature
  • TX, TXV, and Space Level Screening Available 2/. Consult Factory. MAXIMUM RATINGS 3/ Symbol Value Units Peak Repetitive Reverse and DC Blocking Voltage VRRM VRWM VR

100 Volts

Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TC = 100oC) I O 120 Amps Peak Surge Current (8.3 ms pulse, half sine wave superimposed on Io, allow Junction to reach equilibrium between pulses, TA = 25oC) IFSM 1000 Amps Operating & Storage Temperature TOP & Tstg -55 to +175 oC Maximum Thermal Resistance (Junction to Case) RθJC 0.3 oC/W SEDPACK 3 (LB) SEDPACK 3 with Lead (LE) SEDPACK 3 with Lead and Heatsink (LT) NOTES: 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0014D DOC

ELECTRICAL CHARACTERISTICS 3/ Symbol Maximum Value Units Instantaneous Forward Voltage Drop (TA=25ºC, 300 μsec pulse) IF = 40 A IF = 120 A VF1 VF2 0.71

0.95 VDC

Instantaneous Forward Voltage Drop (300 μsec pulse) TA= 125ºC, IF = 120 A VF3

0.78 VDC

(Rated VR, TA = 25ºC, 300 μsec pulse minimum) IR1 5.0 mA Reverse Leakage Current (Rated VR, TA = 125ºC, 300 μsec pulse minimum) IR2 100 mA Junction Capacitance (VR = 5V, f = 1MHz, TA = 25oC) CJ 3200 pF PIN ASSIGNMENT Package TOP BOTTOM LEAD Sedpack 3 (LB) Anode Cathode --- Sedpack 3 with Lead (LE) Anode Cathode Anode NOTES: / For Ordering Information, Price, and Availability Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. Sedpack 3 with Lead (LT) Anode Cathode Anode Case Outline: SEDPACK 3 Case Outline: SEDPACK 3 with Lead Case Outline: SEDPACK 3 with Lead and Heatsink Solid State Devices, Inc. Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SED120LB100, SED120LE100, and SED120LT100 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0014D DOC