SEC1005 SANKEN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

■1.6 × 0.8 Miniature Surface Mount LEDs SEC1005 Series SECU1605C-S Deep red Water clear 1.9 2.5 10 25 10 650 10 639 10 20 10 AlGaInP SECU1205C-S Red Water clear 1.9 2.5 10 45 10 635 10 625 10 20 10 AlGaInP SECU1805C-S Amber Water clear 1.9 2.5 10 50 10 615 10 607 10 17 10 AlGaInP SECU1905C-S Orange Water clear 1.9 2.5 10 40 10 591 10 589 10 15 10 AlGaInP SECK1D05C-S Green Water clear 3.8 4.3 10 45 10 514 10 520 10 40 10 GaN on Si SECT1D05C-S Pure green Water clear 3.3 3.8 10 180 10 520 10 526 10 35 10 InGaN SECS1L05C-S Aqua blue Water clear 3.1 3.6 10 50 10 486 10 490 10 45 10 InGaN SECK1L05C-S Aqua blue Water clear 3.5 4.1 10 20 10 488 10 490 10 30 10 GaN on Si SECT1E05C-S Blue Water clear 3.3 3.8 10 40 10 460 10 466 10 25 10 InGaN SECK1E05C-S Blue Water clear 3.6 4.0 10 10 10 470 10 472 10 30 10 GaN on Si Part Number Emitting Color Lens Color Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Chip Material VF (V) TYP TYP TYP TYPTYPMAX Conditions IF (mA) Iv (mcd) Conditions IF (mA) λP (nm) Conditions IF (mA) (nm) Conditions IF (mA) λd (nm) Conditions IF (mA) *Mass production in preparation 0.3 0.7 1.2 1.0 (0.2)0.35 0.55 1.6 0.8 Anode Cathode mark Cathode Resin P.C.B. 1.00.500.51.0 90-90 -60 -30 1.00.500.51.0 90-90 -60 -30 1.00.500.51.0 90-90 -60 -30 1.00.500.51.0 90-90 -60 -30 InGaN AlGaInP Directional Characteristics (representative example) External Dimensions (Unit: mm) Product Mass: Approx. 0.001 g Dimensional Tolerance: ±0.3 5-1-3 Unicolor surface mount

218 LEDs

  • Visible Light Unicolor Lamp Parameter Unit −30 to +80 −0.45 −30 to +100 120 100 −30 to +85 ConditionsGaP GaAsP GaAlAs AlGaInP InGaN GaN Ratings mW mA mA/°C mA V PD IF ∆IF IFP VR Top Tstg 25°C or higher f=1kHz, tw≤100 sµ
  • Visible Light Bicolor Lamp GaP GaAsP GaAlAs AlGaInP InGaN 120 Ratings Conditions −0.45 100 −30 to +85 −30 to +100 Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 s µ
  • Visible Light Unicolor Surface Mount LEDs Parameter Unit 3 5 −30 to +100 −30 to +85 −0.45 100*1 −30 to +80 −0.27 70*2 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaP GaAsP GaAlAs AlGaInP InGaN GaN Ratings Conditions IF ∆IF IFP VR Top Tstg mA mA/°C mA V 25°C or higher f=1kHz, tw≤100 sµ
  • Visible Light Bicolor Surface Mount LEDs Parameter Unit ConditionsSEC2002/2004 (Same conditions for simultaneous lighting) −0.45 −30 to +85 −30 to +100 Ratings IF ∆IF IFP VR Top Tstg mA mA/°C mA V P D mW 25°C or higher f=1kHz, tw≤100 sµ
  • Visible Light Three Element Surface Mount LEDs Red Green/Blue −30 to +80 −30 to +100 Parameter Unit Conditions Ratings SECT3M02C-S 120 −0.45 PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 s µ 5-1 Visible Light LEDs