SECG1D07C-SD

SECG1D07C-SD SANKEN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

LED Data Sheet - SECG1D07C-SD SECG1D07C-SD

• External Shape Type ： 1.6×0.8×0.7 Miniature Surface Mount LED
• Color ： Green
• Lens color ： Clear
• Material of a chip ： InGaN
• Application ： Automotive, Consumer Electronics, Office Automation, Indicator
• Feature ： High ESD tolerance, RoHS compliant, Compatible with heat-resistance of lead-free solder.
• Rating (Ta=25℃) Description Symbol Unit Forward current IF ｍＡ Forward current reduction ⊿IF ｍＡ/℃ Pulse forward current IFP ｍＡ Reverse current IR mA Operating temperature Topr ℃ Storage temperature Tstg ℃
• Photoelectric characteristic (Ta=25℃) Description Symbol Min Typ Max Unit Forward voltage VF 3.2 3.7 V Reverse voltage VR 0.8 V Luminous intensity IV 99 170 287 mcd Dominant wavelength λd 525 nm Spectral bandwidth ⊿λ 35 nm Directional angle 2θ1/2 - deg.
• Luminous intensity rank (Ta=25℃) C 99 ～ 162 D 132 ～ 216 E 176 ～ 287
• Dominant wavelength rank (Ta=25℃) Tolerance：±2nm G 520 ～ 525 Y 525 ～ 530 SANKEN ELECTRIC COMPANY, LTD. Remark Avobe25℃ IF = 10mA f=1kHz tw≦100μs －30～100 -0.45 IF = 10mA Conditions IF = 10mA Ratings IF = 10mA －30～ 85 rank Luminous intensity range(mcd) rank Dominant Wavelengs range(nm) IR = 1mA IF = 10mA Page 1 / 11

LED Data Sheet - SECG1D07C-SD

• Characteristic data SANKEN ELECTRIC COMPANY, LTD. 100 ＩＦ [ｍＡ] ＶＦ ［Ｖ］ IF-VF 0.10 1.00 10.00 1 10 100 ＩＶ（Relative intencity） ＩＦ ［ｍＡ］ IV-ＩF 0 10 20 30 40 50 60 70 80 90 ＩＦmax [ｍＡ] Ta ［℃］ IFmax-Ta 0.0 0.2 0.4 0.6 0.8 1.0 1.2 400 500 600 700 Relative Intencity @IF=10mA λ [nm] Spectrum Page 2 / 11

LED Data Sheet - SECG1D07C-SD SANKEN ELECTRIC COMPANY, LTD. 100 100 -90 -60 -30 Directional angle : Y direction 100 100 -90 -60 -30 Directional angle : X direction 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 -30 -10 10 30 50 70 90 VF[V] @IF=10mA Ta [℃] VF-Ta 0.5 1.0 1.5 -30 -10 10 30 50 70 90 IV [Relative intencity] @IF=10mA Ta [℃] IV-Ta Cathode near side is cathode Page 3 / 11

LED Data Sheet - SECG1D07C-SD

• Outline SANKEN ELECTRIC COMPANY, LTD. 0.85 ±0.05 0.2 0.5 0.7 1.0 1.8 1.0 Cathode Cathode mark Cathode Anode 0.3 0.7 1.2 (0.2) 1.6 0.8 φ1.5-0 +0.1 1.75 8.0 ±0.053.5 4.02.04.0 ±0.05 4.0 Resin P.C.B. Part in bulk (20/1) SEC1007 Series Outline dimensions Embossed taping (5/1) Tolerance ±0.1Material of leads ： Copper Finish ： Au plating Material of resin ： Silicone LED insertion direction LED Anode Cathode Inner circuit Protective Diode Page 4 / 11

LED Data Sheet - SECG1D07C-SD

• Soldering conditions Following soldering conditions are recommended. ① Reflow conditions（at the surface of LED resin） Pre-heat ：150 ～ 180 ℃、60 ～ 120 sec Soldering temperature： Soldering time more than 220℃ is less than 40 sec. Peak temperature is should be is less than 260℃. ② Manual soldering Temperature of soldering iron tip should be 350±10℃ for 3 seconds, which shall apply to only one soldered point and once for the each soldered point. ③ Recommendable soldering pattern Unit：mm SANKEN ELECTRIC COMPANY, LTD. Reflow soldering profile 100 140 180 220 260 300 0 50 100 150 200 250 300 Soldering Time Temperature of surface LED [℃] Pre-heat 60 ～ 120 sec Max 40 sec Peak Max 260℃ 0.80.80.8 0.8 Page 5 / 11

LED Data Sheet - SECG1D07C-SD

• Attention after opened The LED is in SMD package. When the LED is mounted by means of soldering and the resin is unusually damp, soldering may cause interfacial defoliation. This occurs when a drastic temperature change causes moisture in the resin to evaporate and to swell. Therefore, attention to the below must be paid. ① Atmosphere when using the LEDs after package is opened After opened and mounted, soldering should be carried out quickly. Following atmosphere is recommended when using (and mounting) the LEDs. Temperature : 5～30℃ Humidity : less than 70% ② Baking In case 168 hours have passed after package is opened, LEDs must be dried as follows. 60±5 ℃ for more than 24 hours (taping reel) ③ Storage after package is opened Following storage conditions are recommended after package is opened. In case indicator color (blue) of desiccant (ex. silica gel) has disappeared, LEDs must be dried under the same conditions as ② above.
• Other ① After soldering any mechanical force or excessive vibration should not be applied to LEDs during cooling process until the LEDs cool down to normal temperature. ② Quick cooling must be avoided. ③ The LEDs should not be mounted on warped direction of PCB. SANKEN ELECTRIC COMPANY, LTD. Page 6 / 11

LED Data Sheet - SECG1D07C-SD

• Electrostatic discharge. InGaN based elements, such as blue LED is generally sensitive to electrostatic discharge. Therefore, the surge protection diode is connected by reverse in parallel as shown in an internal circuit. At this time, in the case of the machine model, the electrostatic discharge of LED is designed to satisfy more than about 200V. Moreover, in the case of the human model, it is designed to satisfy more than about 2000V. (These are not guaranteed values.) If the voltage is applied in the reverse direction of the LED with the surge protection diode, there is a possibility that excessive current may flow into the protection diode. Therefore, when you use this LED, be careful not to impress voltage to the reverse direction of the LED. SANKEN ELECTRIC COMPANY, LTD. LED Anode Cathode Inner circuit Protective Diode Page 7 / 11

LED Data Sheet - SECG1D07C-SD

• Reliability test SANKEN ELECTRIC COMPANY, LTD. Test Items EIAJ ED-4701 Test Conditions Life Steady state operating life - Ta=RT、Ifmax Tests t=1000h High temperature storage 201 Ta=Tstgmax t=1000h Low temperature storage 202 Ta=Tstgmin Environ t=1000h -mental Moisture Resistance 103 Ta=60±5℃、RH=90±5％ Tests t=1000h Temperature cycle 105 Tstgmin(30min)～Tstgmax(30min) 100cycles Soldering heat 301 T=260±5℃、t=10s、1time Solderaibirity 402 T=245±5℃、t=5±1s、1time、Using flux for Pb free solder Drop - H=1m、Drop on maple board、10times Mesurement Item and Criterion Judge Failure No Measurement Item Mark Criterion Judge Failure 1 Forward Voltage VF OK≦V.F.S.×±20％ 2 Luminous Intensity Iv OK≧I.V.S.×0.5 *Solderability … The Lead shall be covered by solder at least 95%. Mesurement conditions is based on specifications. Tstgmax and Tstgmin is absolute maximum ratings. IFmax and IFPmax is absolute maximum ratings. U.S.L. is upper limit of standard. V.F.S. is Initial data of VF. I.V.S. is Initial data of Luminous Intensity. Page 8 / 11

LED Data Sheet - SECG1D07C-SD

• Packing Packing Material ： Aluminum laminated moisture-proof packing Quantity ： 4000 pcs (Minimum order quantity) Label ： See below. ↑ ↑ ↑ ① ② ③ ①Last digit of year、 ②Month (January～September→Arabic Numeral October →O、November→N、December→D) ③Day ３） quantity ： 4000pcs ↑ ↑ ① ② ①Luminous intensity rank ②Dominant wavelength rank SANKEN ELECTRIC COMPANY, LTD. 印刷エリア 防湿梱包のご注意 230±5 270±5 SANKEN ELECTRIC CO., LTD MADE IN JAPAN LOT NO. **** RANK *-* Notch（Both sides）Zipper ＊Label Unit：mm QTY 4,000 PCS Page 9 / 11

LED Data Sheet - SECG1D07C-SD

• Taping reel dimensions SANKEN ELECTRIC COMPANY, LTD. Label 2.0 ±0.2 φ13 φ22 ±0.39.0 11.4±1.0 -0φ60 φ180 ±0.2 Tolerance ±0.2 MADE IN JAPAN LOT NO. **** SANKEN ELECTRIC CO., LTD ①Quantity ②Accumulative pitch tolerance ③Adhesion strength of cover tape ④Packaging at the angle of 10 degrees. P/N, manufacturing date code number and quantity shall be indicated on a moist-proof package. Adhesion strength shall be 0.1-0.7N when the cover tape and the carrier tape are torn off Accumulative tolerance per 10 pitches shall be ±0.2mm. QTY 4,000 PCS RANK * The quantity per reel shall be 4000 pcs. Page 10 / 11

LED Data Sheet - SECG1D07C-SD

• Tips ・The contents written in this data sheet may be changed without a preliminary announcement by improvement etc. When you use it, please check that information is the newest and conclude specifications. ・Application and operation examples described in this publication are quoted for the sole purpose of reference for the use of the products herein and Sanken can assume no responsibility for any infringement of industrial property rights, intellectual property rights or any other rights of Sanken or any third party which may result from its use. ・When using the products specified herein by either combining other products or materials therewith or physically, chemically or otherwise processing or treating the products, please duly consider all possible risks that may result from all such uses in advance and proceed therewith at your own responsibility. ・Although Sanken undertakes to enhance the quality and reliability of its products, the occurrence of failure and defect of semiconductor products at a certain rate is inevitable. Users of Sanken products are requested to take, at their own risk, preventative measures including safety design of the equipment or systems against any possible injury, death, fires or damages to the society due to device failure or malfunction. ・Sanken products listed in this catalog are designed and intended for the use as components in general purpose electronic equipment or apparatus (home appliances, office equipment, telecommunication equipment measuring equipment, etc.). Before placing an order, the user's written consent to the specifications is requested. When considering the use of Sanken products in the applications where higher reliability is required (transportation equipment and its control systems, traffic signal control systems or equipment, fire/crime alarm systems, various safety devices, etc.), please contact your nearest Sanken sales representative to discuss and obtain written confirmation of your specifications. The use of Sanken products without the written consent of Sanken in the applications where extremely high reliability is required (aerospace equipment, nuclear power control systems, life support systems, etc.) is strictly prohibited. ・Anti radioactive ray design is not considered for the products listed herein. ・Gallium arsenic is used in some of the products listed in this document. These products are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed ・Sanken assumes no responsibility for any troubles, such as dropping products caused during transportation out of Sanken’s distribution network. ・If there is any discrepancy between English and Japanese, the Japanese version should take precedence over the English one. SANKEN ELECTRIC COMPANY, LTD. Page 11 / 11