SEC1003_08 SANKEN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

254 LEDs

■3.0 × 1.5 Surface Mount LEDs (Inner Lens Type) SEC1003 Series Lens Color Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Chip Material VF (V) TYP TYP TYP TYPTYPMAX Conditions IF (mA) Iv (mcd) Conditions IF (mA) λP (nm) Conditions IF (mA) (nm) Conditions IF (mA) λd (nm) Conditions IF (mA)Part Number Emitting Color High luminosity Ultrahigh luminosity SEC1603C High luminosity red Water clear 1.7 2.2 10 35 20 660 10 642 10 30 10 GaAlAs SEC1203C Red Water clear 1.9 2.5 10 15 20 630 10 620 10 35 10 GaAsP SEC1803C Amber Water clear 1.9 2.5 10 20 20 610 10 605 10 35 10 GaAsP SEC1903C Orange Water clear 1.9 2.5 10 15 20 587 10 590 10 33 10 GaAsP SEC1703C Y ellow Water clear 2.0 2.5 10 35 20 570 10 571 10 30 10 GaP SEC1403C Green Water clear 2.0 2.5 10 33 20 560 10 567 10 20 10 GaP SEC1403E-TG Deep green Transparent green 2.0 2.5 10 15 20 558 10 564 10 20 10 GaP SEC1503C Pure green Water clear 2.0 2.5 10 10 20 555 10 559 10 20 10 GaP SECU1703C Y ellow Water clear 2.1 2.5 20 70 20 572 20 571 20 15 20 AlGaInP SECU1403C-S Green Water clear 2.1 2.5 20 40 20 562 20 562 20 12 20 AlGaInP SECU1403C-TG Green Water clear 2.1 2.5 20 75 20 564 20 564 20 12 20 AlGaInP SECS1203C Red Water clear 1.9 2.5 20 100 20 635 20 625 20 15 20 AlGaInP SECS1803C Amber Water clear 1.9 2.5 3 10 3 615 3 607 20 15 3 AlGaInP SECS1903C Orange Water clear 1.9 2.5 20 70 20 590 20 590 20 15 20 AlGaInP 1.5 3.0 2.0 1.7 1.4 (0.5)0.9 1.6 0.6 1.3 Lens Resin Anode CathodeCathode mark P.C.B. ø1.0 90° 60° 30° 90° 60° 30° 050100% 50 100% Directional Characteristics (representative example) External Dimensions (Unit: mm) Product Mass: Approx. 0.008 g Dimensional Tolerance: ±0.3 5-1-3 Unicolor surface mount

218 LEDs

  • Visible Light Unicolor Lamp Parameter Unit −30 to +80 −0.45 −30 to +100 120 100 −30 to +85 ConditionsGaP GaAsP GaAlAs AlGaInP InGaN GaN Ratings mW mA mA/°C mA V PD IF ∆IF IFP VR Top Tstg 25°C or higher f=1kHz, tw≤100 sµ
  • Visible Light Bicolor Lamp GaP GaAsP GaAlAs AlGaInP InGaN 120 Ratings Conditions −0.45 100 −30 to +85 −30 to +100 Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 s µ
  • Visible Light Unicolor Surface Mount LEDs Parameter Unit 3 5 −30 to +100 −30 to +85 −0.45 100*1 −30 to +80 −0.27 70*2 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaP GaAsP GaAlAs AlGaInP InGaN GaN Ratings Conditions IF ∆IF IFP VR Top Tstg mA mA/°C mA V 25°C or higher f=1kHz, tw≤100 sµ
  • Visible Light Bicolor Surface Mount LEDs Parameter Unit ConditionsSEC2002/2004 (Same conditions for simultaneous lighting) −0.45 −30 to +85 −30 to +100 Ratings IF ∆IF IFP VR Top Tstg mA mA/°C mA V P D mW 25°C or higher f=1kHz, tw≤100 sµ
  • Visible Light Three Element Surface Mount LEDs Red Green/Blue −30 to +80 −30 to +100 Parameter Unit Conditions Ratings SECT3M02C-S 120 −0.45 PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 s µ 5-1 Visible Light LEDs