SE9M3PS9YIBXNLY ELMA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

■ Comes with the following components and software as a standard configuration: › Abaco Single board computer (SBC3511) › Interface Concept switch (ComEth4590) › Epiq Sidekiq VPX400 Transceiver › Sciens Helux software tools including MORA Explorer and MSRP Generator pre-integrated onto the SBC ■ 6-slot OpenVPX backplane aligned with SOSA ■ Built-in VITA 46.11 Chassis Manager for intelligent system health monitoring ■ Conduction cooled card guides ■ Front and rear fan trays with 12 VDC fans ■ Front panel on/off switch, reset switch, voltage LEDs and test point ■ NVMRO and Zeroize Switches ■ AC operation with power cord ■ Other components available for a custom configuration are: › RF Payload cards like tuners, transceivers, or down-converters from EPIQ, G3, DRS, Mercury (Pentek), or Abaco › Alternate SBCs from Abaco or Concurrent Technologies › Alternate switches from Interface Concept or Abaco Datasheet-3U-VPX-MORA-Dev.-Platform_10.10.24 Front View Helux Tool Suite

www.elma.com 2/52/5 3U VPX MORA Ready Development Platform (MRDP) ALIGNED TO SOSA™ AND CMOSS BACKPLANE PROFILE Datasheet-3U-VPX-MORA-Dev.-Platform_10.10.24 Benefits ■ Pre-configured development platforms for SOSA and CMOSS development ■ Supports the Army‘s new CCDC MORA architecture ■ Comes with both key components and software elements to begin development upon power-up 1SVX306AKP-1X31: Slot 1: SLT3-PAY-1F1F2U1TU1T1U1T-14.2.16 Slot 2, 5 & 6: SLT3-PAY-1F1U1S1S1U1U2F1H-14.6.11 Slot 3: SLT3x-TIM-2S1U22S1U2U1H-14.9.2 Slot 4: SLT3-SWH-6F1U7U-14.4.14 LINE DRAWING ■ Configuration can transfer to a deployable platform after development is complete such as the Elma CMFF / SAVE Chassis or the SOSA aligned half ATR

www.elma.com 3U VPX MORA Ready Development Platform (MRDP) ALIGNED TO SOSA™ AND CMOSS Datasheet-3U-VPX-MORA-Dev.-Platform_10.10.24 SYSTEM OVERVIEW The development platform is available with a range of partner boards that are aligned to the SOSA 1.0 profiles, including Ethernet Switch, I/O or Compute Intensive SBCs, high end graphics and VITA 62 Power Module. › Elma MORA Ready Development Platform › Abaco Single board computer (SBC3511) › Interface Concept switch (ComEth4590a) › Epiq Sidekiq VPX400 Transceiver Other Board Options: › RF Payload cards like tuners, transceivers, or down-converters from Epiq, G3, DRS, Mercury (Pentek), or Abaco. › PNT card Other Software Options: Helux Client Core, a collection of client-based software libraries for the development of client applications. › Sciens - helux Tool Suite - A comprehensive tool suite providing graphical user interfaces to simplify MORA device exploration, configuration, and interaction. Ecosystem Partner Boards and Software Software Partner Helux Tool Suite

www.elma.com › Provides a high-performance, flexible, adaptable, enclosure compliant to CMOSS and aligned with SOSA Technical Standard 1.0 › A rugged chassis designed for the ground combat and tactical ground mobile environments 3U VPX MORA Ready Development Platform (MRDP) ALIGNED TO SOSA™ AND CMOSS

APPLICATIONS

› Mission control › Secure communications › Surveillance › Data and image processing › Weapons control OpenVPX / SOSA and CMOSS aligned development systems help to speed time to deployment for critical defense applications including but not limited to: Datasheet-3U-VPX-MORA-Dev.-Platform_10.10.24

RELATED PRODUCTS

CMFF / SAVE Compliant Chassis ELECTRICAL SPECIFICATIONS Input Voltage 115 - 240 VAC Input Connectors 10.0A - 15.0A max Input Frequency 47 - 63Hz › Target tracking and display › Navigational control › Threat detection › Process monitoring SOSA Aligned ½ ATR chassis › Off the shelf ATR compliant to SOSA and ready for rapid deployment Voltage +5V +12V +3.3V -12V Max Load 36.0A 116.0A 31.0A 0.5A Min Load 1.0A 2.0A 1.0A 0.0A Regulation ±5% ±5% ±5% ±5 Ripple & Noise 50mV 120mV 50mV 120mV *Power module total output power of +5V and 3.3V not exceed 210W *Power module total output power not exceed 1400W for 180~264V *Power module total output power not exceed 1200W for 103~132V *Power good signal: ON delay 100ms to 500ms, OFF delay 1ms, HOLD UP time: 17ms minimum at full *Load & nomimal input voltage OUTPUT SPECIFICATIONS

www.elma.com 3U VPX MORA Ready Development Platform (MRDP) ALIGNED TO SOSA™ AND CMOSS Datasheet-3U-VPX-MORA-Dev.-Platform_10.10.24 ACCESSORIES Optional System test accessories including load boards, extender boards, slot to slot cable systems and rear transition modules. ORDER INFORMATION 3U VPX MORA Ready Development Platform (MRDP) Model Number (Part Number) Measures 9.8”wide x 13.8”deep x 15.9” height front and rear 1” pitch card front and rear 1” pitch card cages for 3U VPX and RTM, conduction cooled card guides. Comes with: SE9M3PS9YIBXNLY o Elma Development Chassis o 1SVX306AKP-1X31 Backplane o Abaco Single board computer (SBC3511) o Interface Concept switch (ComEth4590a) o Epiq Sidekiq VPX400 Transciever o Sciens helux Tool Suite Elma Development Chassis Specifications

  • 1400W ATX style PSU
  • Front and rear fan trays with 12VDC fans
  • AC operation, AC power cord
  • Front panel On/Off switch, reset switch, voltage / fan LEDs and voltage test points
  • Completely assembled, wired and tested
  • Software is installed on SBC
  • Support Includes: o 4 hours of Technical overview session (Elma and Sciens) o 8 hours of Chassis Support (Elma) o 8 hours of MORA Tools support (Sciens) 3U OpenVPX Ethernet Switch - Interface Concept
  • Module profile aligned with SOSA guideline1
  • 10GbE and 40GbE port configurations in copper and fibe r
  • Dual domain 10Gb and 40b port configurations to backplane and includes front 1/10Gb fiber ports for both Data Plane and Control Plane ComEth4590A 3U Rugged Single Board Computer aligned with CMOSS and SOSA ABACO
  • Based on the new, highly integrated Intel® Xeon® E-2276ME 6-core/ 12-thread processor SBC3511 3U Rugged Transceiver aligned with SOSA Epiq Sidekiq
  • 4 Rx and 4 Tx,16-bit sample width, Xilinx Kintex® Ultrascale™ XCU115 FPGA VPX400 © Copyright 2024 by Elma Electronic Inc. Subject to technical modifications, all data supplied without liability. Please contact our sales team for more details. China: +86 21 5866 5908 France: +33 388 56 72 50 Germany: +49 7231 97 34 0 Israel: +972 3 930 50 25 Singapore: +65 6479 8552 Switzerland: +41 44 933 41 1 1 United Kingdom: +44 1234 838 822 United States: +1 510 656 3400 *Custom backplane, PIC, and Software combinations available upon request. Contact the factory