NE5533 PHILIPS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Philips Semiconductors Linear Products Product specification NE5533/5533A/ NE/SA/SE5534/5534ADual and single low noise op amp 114August 31, 1994 853-0222 13721

DESCRIPTION

The 5533/5534 are dual and single high-performance low noise operational amplifiers. Compared to other operational amplifiers, such as TL083, they show better noise performance, improved output drive capability and considerably higher small-signal and power bandwidths. This makes the devices especially suitable for application in high quality and professional audio equipment, in instrumentation and control circuits and telephone channel amplifiers. The op amps are internally compensated for gain equal to, or higher than, three. The frequency response can be optimized with an external compensation capacitor for various applications (unity gain amplifier, capacitive load, slew rate, low overshoot, etc.) If very low noise is of prime importance, it is recommended that the 5533A/5534A version be used which has guaranteed noise specifications.

FEATURES

  • Small-signal bandwidth: 10MHz
  • Output drive capability: 600Ω , 10VRMS at VS=±18V
  • Input noise voltage: 4nV H z
  • DC voltage gain: 100000
  • AC voltage gain: 6000 at 10kHz
  • Power bandwidth: 200kHz
  • Slew rate: 13V/µs
  • Large supply voltage range: ±3 to ±20V PIN CONFIGURATIONS

1 BALANCE/ COMPENSATION

D, FE, N Packages 7 8 NE5533/5533A N Package INV INPUT A NON–INV INPUT A BALANCE A BALANCE B NON–INV B INV B BAL COMP A COMP A OUTPUT A OUTPUT B COMP B BAL COMP B TOP VIEW TOP VIEW

APPLICATIONS

  • Audio equipment
  • Instrumentation and control circuits
  • Telephone channel amplifiers
  • Medical equipment

ORDERING INFORMATION

DESCRIPTION TEMPERATURE RANGE ORDER CODE DWG # 14-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C NE5533N 0405B 14-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C NE5533AN 0405B 8-Pin Plastic Small Outline (SO) package 0 to +70°C NE5534D 0174C 8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP) 0 to +70°C NE5534FE 8-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C NE5534N 0404B 8-Pin Plastic Small Outline (SO) package 0 to +70°C NE5534AD 0174C 8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP) 0 to +70°C NE5534AF 8-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C NE5534AN 0404B 8-Pin Plastic Dual In-Line Package (DIP) -40°C to +85°C SA5534N 0404B 8-Pin Plastic Small Outline (SO) package -40°C to +85°C SA5534AD 0174C 8-Pin Plastic Dual In-Line Package (DIP) -55°C to +125°C SE5534N 0404B 8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP) -55°C to +125°C SE5534AF 8-Pin Plastic Dual In-Line Package (DIP) -55°C to +125°C SE5534AN 0404B 8-Pin Plastic Dual In-Line Package (DIP) -40°C to +85°C SA5534AN 0404B

Philips Semiconductors Linear Products Product specification NE5533/5533A/ NE/SA/SE5534/5534ADual and single low noise op amp August 31, 1994 115 ABSOLUTE MAXIMUM RATINGS SYMBOL PARAMETER RATING UNIT VS Supply voltage ±22 V VIN Input voltage ±V supply V VDIFF Differential input voltage1 ±0.5 V TA Operating temperature range SE -55 to +125 °C SA -40 to +85 °C NE 0 to +70 °C TSTG Storage temperature range -65 to +150 °C TJ Junction temperature 150 °C PD Power dissipation at 25°C 2 16D Pkg 1350 mW 16N Pkg 1500 mW 8D Pkg 750 mW 8FE Pkg 800 mW 8N Pkg 1150 mW Output short-circuit duration3 Indefinite TSOLD Lead soldering temperature (10sec max) 300 °C NOTES: 1. Diodes protect the inputs against over voltage. Therefore, unless current-limiting resistors are used, large currents will flow if the differential input voltage exceeds 0.6V. Maximum current should be limited to ±10mA. 2. For operation at elevated temperature, derate packages based on the following junction-to-ambient thermal resistance: 8-pin ceramic DIP 150°C/W 8-pin plastic DIP 105°C/W 8-pin plastic SO 160°C/W 16-pin plastic DIP 80°C/W 16-pin plastic SO 90°C/W 3. Output may be shorted to ground at VS=±15V, TA=25°C. Temperature and/or supply voltages must be limited to ensure dissipation rating is not exceeded.

Philips Semiconductors Linear Products Product specification NE5533/5533A/ NE/SA/SE5534/5534ADual and single low noise op amp August 31, 1994 116 DC ELECTRICAL CHARACTERISTICS TA=25°C, VS=±15V, unless otherwise specified.1, 2, 3 SYMBOL PARAMETER TEST CONDITIONS SE5534/5534A NE5533/5533A NE/SA5534/5534A UNITSYMBOL PARAMETER TEST CONDITIONS Min Typ Max Min Typ Max UNIT VOS 0.5 2 0.5 4 mV Offset voltage Over temperature 3 5 mV ΔVOS /ΔT 5 5 µV/°C IOS 10 200 20 300 nA Offset current Over temperature 500 400 nA ΔIOS /ΔT 200 200 pA/°C IB 400 800 500 1500 nA Input current Over temperature 1500 2000 nA ΔIB/ΔT 5 5 nA/°C ICC Supply current per op amp Over temperature 4 6.5 4 8 mA mA VCM Common mode input range ±12 ±13 ±12 ±13 V CMRR Common mode rejection ratio 80 100 70 100 dB PSRR Power supply rejection ratio 10 50 10 100 µV/V AVOL Large-signal voltage gain R L≥600Ω , VO =±10V Over temperature 100 25

100 V/mV

R L≥600Ω Over temperature R L≥600Ω , VS=±18V R L≥2kΩ Over temperature ±12 ±10 ±15 ±13 ±12 ±13 ±12 ±16 ±13.5 ±12.5 ±12 ±10 ±15 ±13 ±12 ±13 ±12 ±16 ±13.5 ±12.5 V V V V V R IN Input resistance 50 100 30 100 kΩ ISC Output short circuit current 38 38 mA NOTES: 1. For NE5533/5533A/5534/5534A, TMIN = 0°C, TMAX = 70°C 2. For SE5534/5534A, TMIN = -55°C, TMAX = +125°C 3. For SA5534/5534A, TMIN = -40°C, TMAX = +125°C

Philips Semiconductors Linear Products Product specification NE5533/5533A/ NE/SA/SE5534/5534ADual and single low noise op amp August 31, 1994 117 AC ELECTRICAL CHARACTERISTICS TA=25°C, VS=±15V, unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS SE5534/5534A NE5533/5533A NE/SA5534/5534A UNITSYMBOL PARAMETER TEST CONDITIONS Min Typ Max Min Typ Max UNIT R OUT Output resistance AV=30dB closed-loop f=10kHz, RL=600Ω , C C =22pF 0.3 0.3 Ω Transient response Voltage-follower, VIN=50mV R L=600Ω , CC =22pF, C L=100pF tR Rise time 20 20 ns Overshoot 20 20 % Transient response VIN=50mV, RL=600Ω C C =47pF, CL=500pF tR Rise time 50 50 ns Overshoot 35 35 % AV Gain f=10kHz, CC =0 6 6 V/mV f=10kHz, CC =22pF 2.2 2.2 V/mV GBW Gain bandwidth product C C =22pF, CL=100pF 10 10 MHz SR Slew rate C C =0 C C =22pF V/µs V/µs Power bandwidth VOUT =±10V, CC =0 200 200 kHz VOUT =±10V, CC =22pF 95 95 kHz VOUT =±14V, RL=600Ω 70 70 kHz C C =22pF, VCC =±18V

ELECTRICAL CHARACTERISTICS

TA=25°C, VS = 15V, unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS 5533/5534 5533A/5534A UNIT Min Typ Max Min Typ Max fO =30Hz 7 5.5 7 nV/√Hz VNOISE Input noise voltage fO =1kHz 4 3.5 4.5 nV/√Hz fO =30Hz 2.5 1.5 pA/√Hz INOISE Input noise current fO =1kHz 0.6 0.4 pA/√Hz Broadband noise figure f=10Hz-20kHz, RS=5kΩ 0.9 dB Channel separation f=1kHz, RS=5kΩ 110 110 dB

Philips Semiconductors Linear Products Product specification NE5533/5533A/ NE/SA/SE5534/5534ADual and single low noise op amp August 31, 1994 118 EQUIVALENT SCHEMATIC

Philips Semiconductors Linear Products Product specification NE5533/5533A/ NE/SA/SE5534/5534ADual and single low noise op amp August 31, 1994 119 TYPICAL PERFORMANCE CHARACTERISTICS GAIN (dB) (nV Hz ) TYPICAL VALUES 10 10 2 103 104 105 106 107 120 -40 f (Hz) 5 8 C C VS = +15V VS = +15V VS = +15V TYPICAL VALUES VS = +15V TYPICAL VALUES IO = 0 0 40 80 102 103 104 105 106 107 -55 -25 0 25 50 75 100 +125 -55 -25 0 25 50 75 100 +125 1,4 1,2 0,8 0,4 0 10 20 0 10 20 6 102 10–1 10–2 10 10 2 103 104 C C (pF) f (Hz) f (Hz) TA (oC) TA (oC) TYP TYP TYPTYP TYP NEG POS C C = 0pF 22pF 47pF C C = 0 C C = 22pF S (V/µs) (V) Vo(p-p) IO (mA) II (µA) VIN (V) IP IN (mA) Vp; -VN (V) Vp; -VN (V) Open-Loop Frequency Response Slew Rate as a Function of Compensation Capacitance Large-Signal Frequency Response Output Short-Circuit Current Input Bias Current Input Commom-Mode Voltage Range Supply Current per Op Amp Input Noise Voltage Density GAIN (dB) TYPICAL VALUES -20 103 104 105 106 107 108 f (Hz) C C = 0; RF = 10kΩ ; RE = 100Ω C C = 0; RF = 9kΩ ; RE = 1kΩ C C = 22pF; RF = 1kΩ ; RE = ∞ Closed-Loop Frequency Response

Philips Semiconductors Linear Products Product specification NE5533/5533A/ NE/SA/SE5534/5534ADual and single low noise op amp August 31, 1994 120 TYPICAL PERFORMANCE CHARACTERISTICS (Continued) R S (Ω ) (pA Hz ) (nV Hz ) 102 10–1 10–2 10 102 103 104 f (Hz) TYP Input Noise Current Density TYPICAL VALUES 10 102 103 104 105 106 Total Input Noise Density 0 10 20 R S (Ω ) Broadband Input Noise Voltage Vn(rms) In(rms) 106 105 104 103 102 10–1 10–2 TYPICAL VALUES Vn(rms) (µV) 102 10–1 10–2 10Hz 1kHz THERMAL NOISE OF SOURCE RESISTANCE 10Hz TO 20kHz 200Hz TO 4kHz TEST LOAD CIRCUITS C C R S R EVI 100kΩ 22kΩ 600Ω 25Ω R F 100pF Frequency Compensation and Offset Voltage Adjustment Circuit Closed-Loop Frequency Response 5533 (1/2) 5534 5533 (1/2) 5534 C C

Philips Semiconductors Linear Products Product specification NE5533/5533A/ NE/SA/SE5534/5534ADual and single low noise op amp August 31, 1994 121 NOISE TEST BLOCK DIAGRAM (nV Hz ) (nV Hz ) CAL OSC POWER SUPPLY CAL METER+V CC -VCC +40dB 10kΩ 100Ω TEST BOARD GND 1Ω DUT BANDPASS AT 1kHz BANDPASS AT 30Hz