NE5512 PHILIPS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Philips Semiconductors Linear Products Product specification NE/SA/SE5512Dual high-performance operational amplifier 78August 31, 1994 853-0948 13721

DESCRIPTION

The 5512 series of high-performance operational amplifiers provides very good input characteristics. These amplifiers feature low input bias and voltage characteristics such as a 108 op amp with improved CMRR and a high differential input voltage limit achieved through the use of a bias cancellation and PNP input circuits with collector-to-emitter clamping. The output characteristics are like those of a 741 op amp with improved slew rate and drive capability, yet have low supply quiescent current.

APPLICATIONS

  • AC amplifiers
  • RC active filters
  • Transducer amplifiers
  • DC gain block
  • Battery operation
  • Instrumentation amplifiers

FEATURES

  • Low input bias < ±20nA
  • Low input offset current < ±20nA
  • Low input offset voltage <1mV
  • Low VOS temperature drift 5µV/°C
  • Low input bias temperature drift 40pA/°C
  • Low input voltage noise 30nV/√Hz
  • Low supply current 1.5mA/amp
  • High slew rate 1.0V/µs
  • High CMRR 100dB PIN CONFIGURATIONS N Package D Package1 NOTE: 1. The D package pinout is not functionally identical to the N pinout. 1OUTPUT 1 -INPUT 1 +INPUT 1 OUTPUT 2 -INPUT 2 +INPUT 2 1+ INPUT 1 -INPUT 2 +INPUT 2 OUTPUT 1 -INPUT 1 OUTPUT 2 TOP VIEW TOP VIEW
  • High input impedance 100MΩ
  • High PSRR 110dB
  • High differential input voltage limit
  • No crossover distortion
  • Indefinite output short circuit protection
  • Internally-compensated for unity gain
  • 600Ω drive capability
  • MIL-STD processing available

ORDERING INFORMATION

DESCRIPTION TEMPERATURE RANGE ORDER CODE DWG # 8-Pin Plastic Small Outline (SO) Package 0 to 70°C NE5512D 0174C 8-Pin Plastic Dual In-Line Package (DIP) 0 to 70°C NE5512N 0404B 8-Pin Plastic Small Outline (SO) Package -40 to +85°C SA5512D 0174C 8-Pin Plastic Dual In-Line Package (DIP) -40 to +85°C SA5512N 0404B 8-Pin Plastic Dual In-Line Package (DIP) -55 to +125°C SE5512N 0404B

Philips Semiconductors Linear Products Product specification NE/SA/SE5512Dual high-performance operational amplifier August 31, 1994 79 ABSOLUTE MAXIMUM RATINGS SYMBOL PARAMETER RATING UNIT VCC Supply voltage ±16 V PD MAX Maximum power dissipation, TA=25°C (still air)1 N package 1212 mW D package 800 mW TA Operating ambient temperature range NE5512 0 to +70 °C SA5512 -40 to +85 °C SE5512 -55 to +125 °C TSTG Storage temperature range -65 to +150 °C TSOLD Lead soldering temperature (10sec max) 300 °C NOTES: 1. The following derating factors should be applied above 25°C N package at 9.7mW/°C D package at 6.4mW/°C

Philips Semiconductors Linear Products Product specification NE/SA/SE5512Dual high-performance operational amplifier August 31, 1994 80 ELECTRICAL PERFORMANCE CHARACTERISTICS VCC = ±15V, TA = 25°C over temperature range, unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS SE5512 NE/SA5512 UNITSYMBOL PARAMETER TEST CONDITIONS Min Typ Max Min Typ Max UNIT VOS Input offset voltage R S=100Ω TA=+25°C Over temp. 0.7 1.5 mV ΔVOS /ΔT 4 5 µV/°C IOS Input offset current R S=100kΩ TA=+25°C Over temp. nA ΔIOS /ΔT 30 40 pA/°C IBIAS Input bias current R S=100kΩ TA=+25°C Over temp. nA ΔIBIAS/ΔT 30 40 pA/°C R IN Input resistance differential TA=+25°C 100 100 M Ω VCM Input common mode range TA=+25°C Over temp. ±13.5 ±13 ±13.7 ±13.2 ±13.5 ±13 ±13.7 ±13.2 V CMRR Input common-mode rejection ratio VCC =±15V VIN=±13.5V CMRR Input common-mode rejection ratio TA=+25°C 70 100 70 100 dBratio VIN=±13V Over temp. AV Large-signal voltage gain R L=2kΩ TA=25°C VO =±10V over temp. 25 200 50 25 200 V/mV SR Slew rate TA=25°C 0.6 1 1 V/µs GBW Small-signal unity gain band- width TA=25°C 3 3 MHz θM Phase margin TA=25°C 45 45 degree VOUT Output voltage swing R L=2kΩ TA=25°C Over temp. ±13 ±12.5 ±13.5 ±13 ±13 ±12.5 ±13.5 ±13 V VOUT Output voltage swing R L=600Ω 1 TA=25°C Over temp. ±10 ±7.5 ±11.5 ±10 ±11.5 V ICC Power supply current R L=Open TA=25°C Over temp. 3.4 3.6 5.5 3.4 3.6 5.5 mA PSRR Power supply rejection ratio Over temp. 80 100 80 100 dB AA Amplifier-to-amplifier coupling f=1kHz to 20kHz, TA=25°C -120 -120 dB THD Total harmonic distortion f=10kHz TA=25°C VO =7VRMS 0.01 0.01 % VNOISE Input noise voltage f=1kHz TA=25°C 30 30 nV/√Hz INOISE Input noise current f=1kHz TA=25°C 0.2 0.2 pA/√Hz ISC Short-circuit current ±15V, TA=25°C 40 40 mA NOTES: 1. Not to exceed maximum package power dissipation.

Philips Semiconductors Linear Products Product specification NE/SA/SE5512Dual high-performance operational amplifier August 31, 1994 81 EQUIVALENT SCHEMATIC OUTPUT -VIN (ONE OP AMP) +V IN