SE5510T

SE5510T SKYWORKS | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 13

Technical content

Features

 All RF ports matched to 50 Ω  Integrated 2.4,5 GHz PA, 5 GHz LNA, SP3T, SP2T switches and filtering  Integrated Power Detector  19.5 dBm @ 3 % EVM, 802.11g, 54 Mbps  18 dBm @ 3 % EVM, 802.11a, 54 Mbps  Lead free, Halogen Free and RoHS compliant  Compact package, 3 x 4 x 0.6 mm, MSL 1

Ordering Information

Part No. Package Remark SE5510T 28 pin QFN Samples SE5510T-R 28 pin QFN Tape & Reel SE5510T-EK1 N/A Evaluation kit Product Description The SE5510T is a complete 802.11n WLAN RF front- end module providing all the functionality of the power amplifiers, LNA, power detector, Antenna switches, filtering and associated matching. The SE5510T provides a complete 2.4 GHz and 5 GHz WLAN RF solution from the output of the t ransceiver to the antennas in a compact form factor. The receive path is designed to maximize performance by providing both a 5 GHz L ow noise amplifier with bypass mode, for use when high power signals are being received. Designed for ease of use, all RF ports are matched to 50 Ω to simplify PCB layout and the interface to the transceiver RFIC. The SE5510T also includes a transmitter power detector for each band with 20 dB of dynamic range. Functional Block Diagram PEN5PEN2 RX5 RX2 BT CBT ANT5 ANT2 TX5 TX2 2.4 GHz PA

5.4 GHz PA

5.4 GHz LNA

Figure 1: Functional Block Diagram

SE5510T: Dual Band 802.11n WLAN/BT Front End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202402A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 2 Pin Out Diagram CBT TX2 RX5 TX5 BT RX2 GND CRX2 GND GND CSP5 PEN2 VCC5 DNC VCC4 GND LEN5 DET GND CSP2 VCC1 ANT5 ANT2 VCC3 CRX5 GND PEN5 VCC2 1413121110987 202122232425262728 Figure 2: SE5510T Pin Out (Top View Through Package) Pin Out Description Pin No. Name Description

1 VCC1 Power Supply

2 RX5 5 GHz Receive port

3 GND Ground

4 RX2 2.4 GHz Receive port 5 CSP2 2.4 GHz PA bias speed-up 6 TX2 2.4 GHz Transmit port

7 VCC2 Power supply

8 GND Ground

9 DNC Do Not Connect

10 CSP5 5 GHz PA bias speed-up

11 PEN5 Enable for 5 GHz PA and

12 VCC3 Power supply

13 GND Ground

14 CRX5 Control for 5 GHz Receive

15 CRX2 Control for 2.4 GHz Receive Pin No. Name Description 16 ANT2 2.4 GHz Antenna port

17 GND Ground

18 ANT5 5 GHz Antenna port

19 CBT Control for Bluetooth port

20 BT Bluetooth port

21 GND Ground

22 LEN5 Enable for 5 GHz LNA and

23 DET Power detector output

24 PEN2 Enable for 2.4 GHz PA and Transmit Switch

25 VCC4 Power supply

26 VCC5 Power Supply

27 GND Ground

28 TX5 5 GHz Transmit port

SE5510T: Dual Band 802.11n WLAN/BT Front End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202402A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 3 Absolute Maximum Ratings These are stress ratings only. Exposure to stresses beyond these maximum ratings may cause permanent damage to, or affect the reliability of the device. Avoid operating the device outside the recommended operating conditions defined below. This device is ESD sensitive. Handling and assembly of this device should be at ESD protected workstations. Symbol Definition Min. Max. Unit VCC Supply Voltage -0.3 5.5 V VIN Control Pin Voltages -0.3 3.6 V TXRFIN TX2/TX5, with ANT2/ANT5 terminated in 50Ω - +10 dBm TA Operating Temperature Range -40 85 °C TSTG Storage Temperature Range -40 150 °C ESD HBM JEDEC JESD22-A114 All pins 1000 V Recommended Operating Conditions Symbol Parameter Min. Typ. Max. Unit VCC Supply Voltage 2.97 3.3 3.6 V TA Ambient Temperature -40 25 85 °C Control Logic Characteristics Conditions: VCC = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5510T-EK1 evaluation board (de- embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Parameter min nom max Units Logic input high : VIH 1.6 3.6 V Logic input low : VIL 0 0.3 V Logic input High current : IIH (All except CRX2, CRX5) IIH ( CRX2, CRX5) µA Logic input Low current : IIL (All except CRX2, CRX5) IIL ( CRX2, CRX5) µA

SE5510T: Dual Band 802.11n WLAN/BT Front End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202402A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 4 Conditions: VCC = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5510T-EK1 evaluation board (de- embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted Symbol Parameter Conditions Min. Typ. Max. Unit TXICC-G Total 802.11g Transmit Supply Current POUT = 20 dBm, 54 Mbps OFDM signal, 64QAM, PEN2 = Hi, POUT = 18 dBm, 54 Mbps OFDM signal, 64QAM, PEN2 = Hi, 215 185 mA TXICQ-G Quiescent current , 802.11g Transmit supply Current No RF applied, PEN2=Hi - 120 - mA TXICC-A Total 802.11a Transmit Supply Current P OUT = 18 dBm, 54 Mbps OFDM signal, 64QAM, PEN5= Hi POUT = 16 dBm, 54 Mbps OFDM signal, 64QAM, PEN5= Hi 230 210 mA TXICQ-A Quiescent current , 802.11a Transmit supply Current No RF applied, PEN5- Hi - 155 - mA RXICC-A Total 802.11a Receive Supply Current CRX5 = Hi, LEN= Hi CRX5 = Hi, LEN = Lo - 10 0.25 mA RXICC-G Total 802.11g Receive Supply Current CRX2 = Hi 0.25 mA ICC-BT Total BT Supply Current CBT = Hi - 0.25 mA ICC_OFF Total Supply Current No RF, PEN2=PEN5=CRX2=CRX5=CBT=L EN5=0V - 5 μA

SE5510T: Dual Band 802.11n WLAN/BT Front End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202402A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 5 Operating Modes Mode# Mode Description PEN2 PEN5 LEN5 CRX2 CRX5 CBT

0 All Off 0 0 0 0 0 0

1 BT 0 0 0 0 0 1

2 BT + RX5(Low gain) 0 0 0 0 1 1

3 BT + RX5(High gain) 0 0 1 0 1 1

4 BT + TX5 0 1 0 0 0 1

5 RX2 + RX5(Low gain) 0 0 0 1 1 0

6 RX2 + RX5(High gain) 0 0 1 1 1 0

7 TX2 1 0 0 0 0 0

8 TX5 0 1 0 0 0 0

9 RX2 0 0 0 1 0 0

10 RX5 (Low Gain) 0 0 0 0 1 0

11 RX5 (High Gain) 0 0 1 0 1 0

SE5510T: Dual Band 802.11n WLAN/BT Front End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202402A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 6

2.4 GHz Transmit Characteristics

Conditions: VCC = 3.3 V, PEN2= Hi, TA = 25 °C, as measured on Skyworks Solutions’ SE5510T-EK1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter Condition Min. Typ. Max. Unit FIN Frequency Range - 2400 - 2500 MHz POUT Output Power, 54 Mbps OFDM, 64 QAM EVM=3% EVM=2.5% 18.5 19.5 dBm S21 Gain 2400 – 2500 MHz 27.5 dB S21_OOB Out of Band Gain <2170 MHz 19 dB ∆S21 Gain Variation Over band 1.5 dBpp S11 Input Return Loss -10 dB S22 Output Return Loss -10 -5 dB NF Noise Figure 10 dB 11b Harmonics 2f @ Pout= 22 dBm -35 -25 dBm/MHz 3f 3f @ Pout = 22 dBm -35 -30 ACP11b Spectral Mask 11b @ Pout=22 dBm: fc +/- 11 MHz fc +/- 22 MHz -34 -54 -32 -52 dBc STAB Stability POUT ≤ 23dBm Load VSWR = 4:1 All non-harmonically related outputs less than -45 dBm/MHz TEN Enable time 10% to 90% of TX RF power, from time that PEN2 is at 50% 800 nsec

SE5510T: Dual Band 802.11n WLAN/BT Front End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202402A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 7

2.4 GHz Receive Characteristics

Conditions: VCC = 3.3V, CRX2 = Hi, TA = 25 °C, as measured on Skyworks Solutions’ SE5510T-EK1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter Condition Min. Typ. Max. Unit FOUT Frequency Range - 2400 - 2500 MHz RX2IL Insertion Loss CRX2= Hi - 1.0 dB S11 RX2 Port Return Loss CRX2= Hi - -14 dB ISOLSW Switch Isolation ANT2-RX2, PEN2=Hi 26 - dB IP1dB Input P1dB CRX2= Hi 15 dBm TEN Enable Time 10% to 90% of RX RF power, from time that CRX2 is at 50% - - 800 nsec Bluetooth Characteristics Conditions: VCC = 3.3 V, CBT= Hi, TA = 25 °C, as measured on Skyworks Solutions’ SE5510T-EK1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter Condition Min. Typ. Max. Unit FOUT Frequency Range - 2400 - 2500 MHz BTIL Insertion Loss CBT= Hi - 1.0 dB S11 BT Port Return Loss CBT= Hi - -14 dB ISOLSW Switch Isolation ANT2-BT, PEN2=Hi 20 - - dB IP1dB Input P1dB CBT= Hi 15 dBm TEN Enable Time 10% to 90% of BT RF power, from time that CBT is at 50% - - 800 nsec

SE5510T: Dual Band 802.11n WLAN/BT Front End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202402A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 8

5 GHz Transmit Characteristics

Conditions: VCC = 3.3 V, PEN5= Hi, TA = 25 °C, as measured on Skyworks Solutions’ SE5510T-EK1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter Condition Min. Typ. Max. Unit FIN Frequency Range - 4900 - 5850 MHz POUT Output Power, 54 Mbps OFDM, 64 QAM EVM=3% EVM=2.5% 17.0 dBm S21 Gain 28 dB ∆S21 Gain Variation Over 40 MHz Channel 1.5 dBpp S11 Input Return Loss -14 -10 dB S22 Output Return Loss -10 -5 dB 2f Harmonics @ Pout=18 dBm 2f (5150-5300 MHz) 2f (5300-5850 MHz) -40 -50 -35 -42 dBm/MHz 3f 3f @ Pout = 18 dBm -50 -45 ACP11a Spectral Mask 11a @ Pout=18 dBm: fc +/- 11 MHz fc +/- 20 MHz fc +/- 30 MHz -23 -30 -43 -20 -28 -40 dBc Stability POUT ≤ 21dBm Load VSWR = 4:1 All non-harmonically related outputs less than -45 dBm/MHz TEN Enable time 10% to 90% of TX RF power, from time that PEN5 is at 50% - - 800 nsec

5 GHz Receive Characteristics

Conditions: VCC = 3.3 V, LEN5= Hi, TA = 25 °C, as measured on Skyworks Solutions’ SE5510T-EK1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter Condition Min. Typ. Max. Unit FOUT Frequency Range - 4900 - 5900 MHz S21 Gain LEN5 = Hi 12 dB LEN5 = Lo -7 dB NF Noise Figure LEN5=Hi - 2.5 dB IP1dB Input P1dB LEN5= Hi LEN5=Lo +7 - dBm S11 Input Return Loss - - -10 dB TEN Enable Time 10% to 90% of RX RF power, from time that - - 800 nsec

SE5510T: Dual Band 802.11n WLAN/BT Front End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202402A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 9 Symbol Parameter Condition Min. Typ. Max. Unit LEN5 is at 50% Power Detector Characteristics Conditions: VCC = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5510T-EK1 evaluation board (de- embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter Condition Min. Typ. Max. Unit FOUT Frequency Range PEN2= Hi PEN5 = Hi 2400 4900 - 2500

5900 MHz

PDR Power detect range, peak power Measured at ANT 0 - 23 dBm PDZLOAD DC load impedance - - 2.5 kΩ PDVP23 Output Voltage, POUT = 23 dBm PEN2= Hi 0.8 1.0 V PDVP19 Output Voltage, POUT = 19 dBm PEN5= Hi

4950 MHz

0.4 0.5 0.8 1.0 V PDVpnoRF Output Voltage, POUT = No RF - - 0.125 - V PDVAR Power Detector Accuracy vs Load VSWR Pout=20 dBm, 2:1 load VSWR, any angle -1 +0.6 dB

SE5510T: Dual Band 802.11n WLAN/BT Front End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202402A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 11 Recommended PCB Footprint 25 24 23 1 19 10 118 2 18 3 17 4 16 5 15 6 12 13 14 2728 25 24 23 1 19 10 118 2 18 3 17 4 16 5 15 6 12 13 14 2728 25 24 23 1 19 10 118 2 18 3 17 4 16 5 15 6 12 13 14 2728 Figure 5: Recommended pcb footprint Package Handling Information Because of its sensitivity to moisture absorption, instructions on the shipping container label must be followed regarding exposure to moisture after the container seal is broken, otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SE5510T is capable of withstanding a Pb free solder reflow. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. If the part is manually attached, precaution should be taken to insure that the device is not subjected to temperatures above its rated peak temperat ure for an extended period of time . For details on both attachment techniques, precautions, and handling procedures recommended, please refer to:  “Quad Flat No-Lead Module Solder Reflow & Rework Information”, Document Number QAD-00045.  “Handling, Packing, Shipping and Use of Moisture Sensitive QFN”, Document Number QAD-00044.

SE5510T: Dual Band 802.11n WLAN/BT Front End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202402A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 12 Tape and Reel Information Parameter Value Devices Per Reel 3000 Reel Diameter 13 inches Tape Width 12 millimeters Figure 6: SE5510T-R Tape and Reel Information

SE5510T: Dual Band 802.11n WLAN/BT Front End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202402A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 13 Document Change History Revision Date Notes

1.0 April-01-2010 Created

1.1 April-05-2010 Added PCB footprint recommendations

1.2 June-14-2010 Updated Pin out and technical specifications

1.3 June-17-2010 Corrected typo on front page, added pin numbers to Fig2

1.4 June-09-2011 Updated specifications and Updated Functional block diagram

1.5 July-06-2011 Updated RX2 isolation specification

1.6 November-21-2011 Updated specifications

1.7 February-03-2012 Updated temperature range, updated tape and reel info

1.8 April-10-2012 Updated with Skyworks logo and disclaimer statement

Copyright © 2012 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products o r services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this docume nt. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, infor mation or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON -INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FRO M THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DA MAGE. Skyworks products are not intended for use in medical, lifesaving or life -sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks custo mers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their resp ective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.